Internalization of titanium dioxide nanoparticles by glial cells is given at short times and is mainly mediated by actin reorganization-dependent endocytosis

Many nanoparticles (NPs) have toxic effects on multiple cell lines. This toxicity is assumed to be related to their accumulation within cells. However, the process of internalization of NPs has not yet been fully characterized. In this study, the cellular uptake, accumulation, and localization of titanium dioxide nanoparticles (TiO₂ NPs) in rat (C6) and human (U373) glial cells were analyzed using time-lapse microscopy (TLM) and transmission electron microscopy (TEM). Cytochalasin D (Cyt-D) was used to evaluate whether the internalization process depends of actin reorganization. To determine whether the NP uptake is mediated by phagocytosis or macropinocytosis, nitroblue tetrazolium (NBT) reduction was measured and the 5-(N-ethyl-N-isopropyl)-amiloride was used. Expression of proteins involved with endocytosis and exocytosis such as caveolin-1 (Cav-1) and cysteine string proteins (CSPs) was also determined using flow cytometry.TiO₂ NPs were taken up by both cell types, were bound to cellular membranes and were internalized at very short times after exposure (C6, 30 min; U373, 2 h). During the uptake process, the formation of pseudopodia and intracellular vesicles was observed, indicating that this process was mediated by endocytosis. No specific localization of TiO₂ NPs into particular organelles was found: in contrast, they were primarily localized into large vesicles in the cytoplasm. Internalization of TiO₂ NPs was strongly inhibited by Cyt-D in both cells and by amiloride in U373 cells; besides, the observed endocytosis was not associated with NBT reduction in either cell type, indicating that macropinocytosis is the main process of internalization in U373 cells. In addition, increases in the expression of Cav-1 protein and CSPs were observed.In conclusion, glial cells are able to internalize TiO₂ NPs by a constitutive endocytic mechanism which may be associated with their strong cytotoxic effect in these cells; therefore, TiO₂ NPs internalization and their accumulation in brain cells could be dangerous to human health.     

Biodegradable versus titanium osteosynthesis in maxillofacial traumatology: a systematic review with meta-analysis and trial sequential analysis

Titanium osteosynthesis is currently the fixation system of choice in maxillofacial traumatology. Biodegradable osteosynthesis systems have the ability to degrade in the human body. The aim of this study was to conduct a systematic review, with meta- and trial sequential analyses, to assess the efficacy and morbidity of biodegradable versus titanium osteosynthesis after maxillofacial trauma. MEDLINE, Embase, and CENTRAL were searched for randomized controlled trials and prospective and retrospective controlled studies. Five time periods were studied: perioperative, short-term (0–4 weeks), intermediate (6–12 weeks), long-term (>12 weeks), and overall follow-up. After screening 3542 records, 24 were included. All had a high risk of performance and detection bias due to the nature of the interventions. Meta-analysis showed no differences in efficacy or morbidity between biodegradable and titanium osteosynthesis. The risk of perioperative screw breakage was significantly higher (risk ratio 17.13, 95% confidence interval 2.19–34.18) and the symptomatic plate removal rate lower in the biodegradable group (risk ratio 0.11, 95% confidence interval 0.02–0.57), which was confirmed by the trial sequential analysis. The quality of evidence ranged from very low to moderate. Based on the narrative review and meta-analyses, current evidence shows that biodegradable osteosynthesis is a viable alternative to titanium osteosynthesis when applied in the treatment of maxillofacial trauma, with similar efficacy but significantly lower symptomatic plate removal rates. Perioperative screw breakage occurred significantly more often in the biodegradable group compared to the titanium group.     

钛瓷瓷裂的临床研究和原因分析

目的：分析钛-瓷修复体失败的原因。方法：对38例瓷裂的钛-瓷修复体进行分析：①肉眼观察烤瓷崩瓷部铸件的表面颜色并用便携式厚度测试仪测量其厚度，与未发生瓷裂的正常镰铬合金烤瓷比较；②观察烤瓷崩瓷的部位；③X-ray检测铸件内部气孔。结果：本组崩瓷的钛-瓷修复体，其断层或有气泡，或金属表面氧化层明显增厚（P〈0．05）。而且，所有发生崩瓷的部位均在受力点或因技工本身操作不当引起。结论：钛-瓷修复体失败的原因与加工过程中工艺、瓷的受力点以及与钛元素化学性能有关。     

钛对大肠杆菌生长影响的实验研究

以草酸钛钾溶液为受试物，用无菌操作法在不同浓度试验水样及不含钛的对照水样中加入大肠杆菌稀释液1ml（含菌300个），观察6小时和1－7天的细菌生长情况。结果各受试组与对照组比较，10.0mg／L和1．0mg／L组接触6小时至7天大肠杆菌生长均有明显的抑制作用；0．1mg／L组接触6－24小时显示抑制作用，但第4天开始菌落减少的速度比对照组缓慢。提示钛对大肠杆菌的生长有抑制作用，其作用阈浓度为1．0mg／L，阈下浓度为0，1mg／L。     

Effects of neurosurgical titanium mesh on radiation dose

The purpose of this study was to determine the dosimetric impact of a neurosurgical titanium mesh in patients treated with 6- and 18-MV photon beams. The effects of a 0.4-mm-thick titanium mesh on the dose profile at 3 regions within a solid water phantom were measured using extended dose range-2 (EDR2) film for 6- and 18-MV photon beams. All measurements were performed with the titanium mesh placed at a depth of 1.5 cm in the phantom. Films were exposed immediately above the mesh, immediately below the mesh, and at a depth of 5 cm from the surface of the phantom. The films were scanned using a scanning densitometer. In the region directly above the titanium mesh, there was an increase in dose of 7.1% for 6-MV photons and 4.9% for 18-MV photons. Directly below the titanium mesh, there was an average decrease in dose of 1.5% for 6-MV photons and an increase of 1.0% for 18-MV photons. At 5-cm depth, for 6- and 18-MV photons, there was a decrease in dose of 2.2% and 0.6%, respectively. We concluded that for cranial irradiation with high-energy photons, the dosimetric impact of a 0.4-mm titanium mesh is small and does not require modification in treatment parameters.     

经后路钛网椎板成形侧块内固定术治疗脊髓型颈椎病的疗效观察

目的 观察后路钛网椎板成形侧块内固定加植骨术治疗脊髓型颈椎病的临床效果。方法 自1999年至今，共有16例脊髓型颈椎病患者经后路钛网椎板成形侧块内固定加植骨术治疗，对治疗结果进行临床及X线评定。结果 通过平均2年5个月的随访，所有病例都得到了改善，其中优6例、良8例、可2例，优良率为93．8％；术后椎管矢状径平均增加4．2mm，钛网无位置变化，并已被再生骨固定。结论 在进行后路减压的同时，钛网椎板成形及侧块内固定，尤其适用于有节段性不稳的脊髓型颈椎病并椎管狭窄、后纵韧带骨化症的治疗。     

Surface modification of titanium by etching in concentrated sulfuric acid

OBJECTIVE: The purpose of this study was to characterize the etching behavior of titanium in concentrated sulfuric acid and discuss its application on surface modification of titanium for biological use. METHODS: Commercially pure titanium (cpTi) plate was etched in 48% H2SO4 at RT -90 degrees C for 0.25-8 h. The weight loss was derived from the weight differences before and after etching. The surfaces after etching were characterized by surface roughness, X-ray diffractometry, and scannning electron spectroscopy. The apparent activation energy of the dissolution of cpTi into acid was derived from an Arrhenius plot of the rate of weight loss versus the acid temperature. RESULTS: The surface roughness of cpTi increased with the acid temperature and etching time. The surface roughness was strongly related to the weight loss. The weight loss increased drastically with the acid temperature after an initial period, which shortened with increasing acid temperature. The apparent activation energy for the dissolution of cpTi in H2SO4 was derived as 67.8 kJ/mol. SIGNIFICANCE: This study indicates that etching with concentrated sulfuric acid is an effective way to modify the surface of titanium for biological applications.