Selective coating of cylindrical matrices with a central hole. I. An interpretation of the swelling process

Cylindrical matrices were prepared by compression either of polyvinyl alcohol 100000 or mixtures of the excipient and a drug (sodium salicylate or theophylline). To modify the cylindrical shape, a hole was bored in the centre of the flat surface through both sides of the matrices. Different swellable systems were obtained applying an impermeable coating to one, two or three surfaces of the perforated matrices. The swelling of the perforated matrices was modified according to the number and the position of the coated surfaces (selective coating) and the loaded drug. Pseudo-zero order kinetics were obtained when the interior hole was the only uncoated surface.     

联合抗青光眼手术治疗不易控制眼压青光眼的研究

采用板层下巩膜床双咬切、睫状体剥离合并睛状体上腔植入硅橡胶条的抗青光眼联合手术治疗不易控制眼压的青光眼46例52眼，其中继发性青光眼27眼，原发闭角青光眼10眼，原发开角青光眼6眼，先天、青少年型青光眼7眼，虹膜角膜内皮综合征2眼。手术总有效率达94％。本术式具有小梁切除、睫状体剥离、睫状体扁平部引流的功能。作者认为用硅橡胶条作植入物，比异体或自体组织作植入物更为理想。     

粮谷尘致肺损害的实验研究

粮谷尘为混合性粉尘，含游离ＳｉＯ２９．７７％，分离培养出普通高温放线菌。染尘动物肺脏早期病变主要为小灶性肺泡炎、灶性间质性肺炎、异物肉芽肿等，大、中支气管壁脱颗粒肥大细胞增多。９０ｄ以后，上述病变明显减少，但逐渐出现少数小的细胞结节，间质轻度纤维组织增生、支气管慢性炎症和小叶中央型肺气肿样病变，观察１ａ（年）未见明显纤维化。     

Heparin–coated circuit during cardiopulmonary bypass

A prospective randomized study was performed to investigate the effect of surface coating with covalently endpoint–attached heparin (Carmeda Bio Active Surface) and reduced general heparinization on haematological indices and complement C5 activation. Care was taken to optimize the rheological design of the system using centrifugal pump and a closed system without venting or machine suction. Twenty patients scheduled for aortocoronary bypass grafting (EF > 0.5) participated in the study. Ten patients were randomized to be treated with heparin–coated equipment (CBAS) and reduced i.v. heparin (1.5 mg kg^-1) while 10 patients treated with identical but noncoated equipment and full heparinization (3 mg–kg^-1) served in a Control group. A vacuum suction was used to collect the blood from the operating field and it was autotransfused at weaning from extracorporeal circulation (ECC). Blood samples were obtained from the venous (precircuit) and arterial (postcircuit) side. We used a new and very specific method for detection of C5a based on monoclonal antibodies. The concentration of C5a was low in both groups during the operation but a significant increase was seen on days 1 and 2. In the Control group there was an increase from 10.2 ngml^-1±1.2 to 27.5 ng ml^-1 ± 4.8 on day 2 and in the CBAS group from 10.7 ng ml^-1 ± 1.2 to 35.6 ng ml^-1 ± 11.6 on day 2 (NS between groups). The granulocytes and total leukocyte count increased at the end of ECC and was maintained at the elevated level throughout the study period. The amount of free haemoglobin was high in the autotransfused blood in both groups. The present results confirm the feasibility of reducing general heparin when using heparin–coated systems but the study does not support the superiority of such coating with regard to biocompatibility in short procedures with a Theologically optimized circuit. The potential benefit from reduced heparin and protamine has not been fully evaluated.     

聚甲氧基硅氧烷及其功能化产物研究Ⅱ.分子结构表征

通过正硅酸甲酯(TMOS)的水解缩合反应制备了聚甲氧基硅氧烷(PMOS)，其分子式可表示为：[SiOa(OH)b(OCH3)c]n。用丙烯酸-2-羟乙酯(HEA)进行酯交换后，制的功能化产物聚丙烯酰氧基甲基硅氧：烷(PAMOS)，其分子式可表示为：[SiOd(OH)c(OCH3)f(OCH2CH2OCOCH=CH2)g]k。通过二氧化硅分析、红外光谱(FTIR)、凝胶渗透色谱(GPC)等方法确定了分子式中a、b、c、n及d、e、f、g、k的值，是一种比较方便、快捷且准确的方法。     

隆鼻硅胶假体雕刻中的四个角度

目的探讨隆鼻硅胶假体雕刻中的四个角度与隆鼻并发症的关系。方法总结了420例硅胶假体隆鼻术患者,分析并发症与假体雕刻的关系,提出假体雕刻要与鼻部解剖形态相吻合的四个角度。结果术后1周,发现3例患者假体鼻根部向一侧轻度偏斜,2例6个月后鼻根部假体固定不良。1例术后主诉头痛,取出假体后症状消失。其余未发生并发症。结论假体雕刻与鼻部解剖形态的四个角度相吻合,可以减少并发症的发生,提高美容效果。     

Effect of surface conditioning methods on the bond strength of luting cement to ceramics

OBJECTIVES: This study evaluated the effect of three different surface conditioning methods on the bond strength of a Bis-GMA based luting cement to six commercial dental ceramics. METHODS: Six disc shaped ceramic specimens (glass ceramics, glass infiltrated alumina, glass infiltrated zirconium dioxide reinforced alumina) were used for each test group yielding a total number of 216 specimens. The specimens in each group were randomly assigned to one of the each following treatment conditions: (1) hydrofluoric acid etching, (2) airborne particle abrasion, (3) tribochemical silica coating. The resin composite luting cement was bonded to the conditioned and silanized ceramics using polyethylene molds. All specimens were tested at dry and thermocycled (6.000, 5-55 degrees C, 30 s) conditions. The shear bond strength of luting cement to ceramics was measured in a universal testing machine (1 mm/min). RESULTS: In dry conditions, acid etched glass ceramics exhibited significantly higher results (26.4-29.4 MPa) than those of glass infiltrated alumina ceramics (5.3-18.1 MPa) or zirconium dioxide (8.1 MPa) (ANOVA, P<0.001). Silica coating with silanization increased the bond strength significantly for high-alumina ceramics (8.5-21.8 MPa) and glass infiltrated zirconium dioxide ceramic (17.4 MPa) compared to that of airborne particle abrasion (ANOVA, P<0.001). Thermocycling decreased the bond strengths significantly after all of the conditioning methods tested. SIGNIFICANCE: Bond strengths of the luting cement tested on the dental ceramics following surface conditioning methods varied in accordance with the ceramic types. Hydrofluoric acid gel was effective mostly on the ceramics having glassy matrix in their structures. Roughening the ceramic surfaces with air particle abrasion provided higher bond strengths for high-alumina ceramics and the values increased more significantly after silica coating/silanization.     

膨胀型聚氨酯防火涂料阻燃机理的研究

用自制的新型成炭剂和聚磷酸铵复配作为聚氨酯防火涂料的阻燃体系。采用热失重分析、扫描电镜、红外光谱和元素分析等手段对膨胀型聚氨酯防火涂料的阻燃机理进行了较为深入的研究．     

Vascular PET Prostheses Surface Modification with Cyclodextrin Coating: Development of a New Drug Delivery System

PURPOSE: Cyclodextrins (CDs) are torus shaped cyclic oligosaccharides with a hydrophobic internal cavity and a hydrophilic external surface. We performed and analysed an antibiotic binding on Dacron (polyethyleneterephtalate, PET) vascular grafts, previously coated with CDs based polymers. METHODS: The CDs coating process was based on the pad-dry-cure method patented in our laboratory. The Dacron prostheses were immersed into a solution containing a polycarboxylic acid, a cyclodextrin and a catalyst, and placed into a thermofixation oven before impregnation with an antibiotic solution (Vancomycin). Biocompatibility tests were performed with L132 human epithelial cells. The antibiotic release in an aqueous medium was assessed by batch type experiments using UV spectroscopy. RESULTS: Viability tests confirmed that the CDs polymers coating the Dacron fibers were not toxic towards L132 cell. Cell proliferation was similar on coated and uncoated grafts. A linear release of Vancomycin was observed over 50 days. CONCLUSION: Our results demonstrate the feasibility of coating CDs onto vascular Dacron grafts. Biological tests show no toxicity of the different cyclodextrins coated. A linear release of antibiotics was depicted over 50 days, demonstrating that cyclodextrin grafting was an efficient drug delivery system.