股骨头骨坏死样本空间结构的Micro-CT评估

目的以股骨头骨坏死样本的Micro-CT断层图像为基础，对其进行空间结构评估。方法2003年11月～2005年6月，收集股骨头骨坏死患者行全髋关节置换术时取出的股骨头样本6个，对样本进行Micro-CT断层扫描，获取股骨头骨坏死样本的计算机三维图像，图像空间分辨率为36μm×36μm×36μm。手工选取兴趣区，随后采用骨体积分数（BV／TV）、骨小梁间隙（Tb．Sp）、骨小梁厚度（Tb，Th）、骨小梁数目（Tb．N）、骨表面积体积比（BS／BV）、结构模型指数（SMI）、骨小梁模型因子（Tb．Pf）等三维空间参数分别对股骨头骨坏死标本的正常区域、硬化带和塌陷区进行评价。结果晚期股骨头骨坏死硬化区和塌陷区的骨小梁空间结构明显改变：硬化区Bv／Tv明显增加，Tb．Th明显增厚，Tb，Sp变窄，SMI与正常区域的骨小梁无差别；而塌陷区Bv／Tv明显减少，BS／BV增大，Tb．N和Tb．Pf增加，Tb，Th改变不明显。结论Micro-CT作为一种新的检测手段，能够在不损伤样本的条件下快速获取股骨头骨坏死样本断层图像，具有精度高、检测快、可进行三维重建分析的优点。晚期股骨头骨坏死不同区域的骨三维结构呈现出不同的空间结构特征。     

Micro-CT observation of rat dental pulp healing after pulpotomy in in vivo study

We report the newly developed Micro-CT, which allows us to observe the individual animal over a long experimental period and to compare changes in pulp tissue in relation to growth and aging without considering individual differences. Further, we used pathological examination to prove similar the result observing from Micro-CT. We have examined wound healing of teeth after pulpotomy in rats, and could clearly observe histopathological changes in the affected teeth and the absorption of temporary filling material and pulp capping agents. In cases with breakage of the dental crown, the CT images agreed with the pathological observations, and it was possible to estimate the time of breakage. In vivo Micro-CT is possible to apply in continuous recording of small experimental animals, such as rats, under anesthesia and the result is sufficiently high. High-quality image was obtained in of the entire head region of the rat. It was suggested that this method can be used for long-term continuous observation of changes in the teeth conditions after pulpotomy in experimental animals. We report the newly developed Micro-CT, which allows us to observe the individual animal over a long experimental period and to compare changes in pulp tissue in relation to growth and aging without considering individual differences.     

不同角度载荷下股骨头骨小梁的生物力学特性

目的探讨不同角度载荷对股骨头骨小梁形态学与力学性能的影响,为研究股骨头坏死、塌陷的生物力学机制提供理论依据。方法利用12月龄羊股骨头和人尸体股骨头分别制作羊股骨头骨小梁试件94个和人股骨头骨小梁试件43个。按照受力方向与骨小梁主压力方向之间的不同夹角,将骨小梁以10°间隔分为内翻10°、0°和外翻10°、20°、30°共计5组,模拟股骨颈骨折内固定术后不同戈登(Garden)对线指数下的复位情况。通过分别对羊股骨头骨小梁进行micro-CT扫描、计算与压缩破坏试验以及对人尸体股骨头骨小梁进行循环压缩试验,分析不同受力方向下股骨头骨小梁的骨体积分数(BV/TV)、骨表面积/骨体积(BS/BV)、骨小梁平均厚度(Tb.Th)、骨小梁数量(Tb.N)、骨小梁间距(Tb.Sp)等形态学指标以及弹性模量、极限强度、屈服强度、初始弹性模量、循环次数等力学指标。结果加载方向与骨小梁的主压力方向之间夹角为0°时,BV/TV、Tb.Th以及弹性模量、极限强度、屈服强度、初始弹性模量、循环次数均为最大,而BS/BV与Tb.N为最小,并随着夹角增大前者呈递减而后者呈递增趋势。结论 12月龄羊股骨头骨小梁BV/TV与极限强度随受力方向与骨小梁主压力方向之间夹角变化的趋势与人股骨头骨小梁一致;加载方向与主压力骨小梁之间夹角增大时,股骨头骨小梁形态学与力学性能均下降;Garden指数偏离160°越大时,股骨头内骨小梁越易发生损伤。     

Calendering as a direct shaping tool for the continuous production of fixed-dose combination products via co-extrusion

In this study calendering is used as a downstream technique to shape monolithic co-extruded fixed-dose combination products in a continuous way. Co-extrudates with a metoprolol tartrate-loaded sustained-release core and a hydrochlorothiazide-loaded immediate-release coat were produced and immediately shaped into a monolithic drug delivery system via calendering, using chilled rolls with tablet-shaped cavities. In vitro metoprolol tartrate release from the ethylcellulose core of the calendered tablets was prolonged in comparison with the sustained release of a multiparticulate dosage form, prepared manually by cutting co-extrudates into mini-matrices. Analysis of the dosage forms using X-ray micro-computed tomography only detected small differences between the pore structure of the core of the calendered tablet and the mini-matrices. Diffusion path length was shown to be the main mechanism behind the release kinetics. Terahertz pulsed imaging visualized that adhesion between the core and coat of the calendered tablet was not complete and a gradient in coat thickness (varying from 200 to 600 μm) was observed. Modulated differential scanning calorimetry and X-ray diffraction indicated that the solid-state properties of both drugs were not affected by the calendering procedure.     

Micro-CT evaluation of bone defects: Applications to osteolytic bone metastases,bone cysts,and fracture

Bone defects can occur in various forms and present challenges to performing a standard micro-CT evaluation of bone quality because most measures are suited to homogeneous structures rather than ones with spatially focal abnormalities. Such defects are commonly associated with pain and fragility. Research involving bone defects requires quantitative approaches to be developed if micro-CT is to be employed. In this study, we demonstrate that measures of inter-microarchitectural bone spacing are sensitive to the presence of focal defects in the proximal tibia of two distinctly different mouse models: a burr-hole model for fracture healing research, and a model of osteolytic bone metastases. In these models, the cortical and trabecular bone compartments were both affected by the defect and were, therefore, evaluated as a single unit to avoid splitting the defects into multiple analysis regions. The burr-hole defect increased mean spacing (Sp) by 27.6%, spacing standard deviation (SpSD) by 113%, and maximum spacing (Sp_max) by 72.8%. Regression modeling revealed SpSD (β = 0.974, p < 0.0001) to be a significant predictor of the defect volume (R² = 0.949) and Sp_max (β = 0.712, p < 0.0001) and SpSD (β = 0.271, p = 0.022) to be significant predictors of the defect diameter (R² = 0.954). In the mice with osteolytic bone metastases, spacing parameters followed similar patterns of change as reflected by other imaging technologies, specifically bioluminescence data which is indicative of tumor burden. These data highlight the sensitivity of spacing measurements to bone architectural abnormalities from 3D micro-CT data and provide a tool for quantitative evaluation of defects within a bone.     

Influence of differences in the hardness and calcium content of diets on the growth of craniofacial bone in rats

Objective:To examine the effects of a soft diet and a low-calcium diet on the craniofacial growth and bone architectures of the maxilla and mandible.Materials and Methods:Male rats (n  =  20, 3 weeks old) were divided into four groups. Ten rats were given a normal-calcium diet, and the other rats were given a low-calcium diet. Each group was then divided into two subgroups, which were fed a hard or a soft diet. After 4 weeks, craniofacial growth and architecture in maxillary and mandibular bone were analyzed using cephalometry, micro-computed tomography, and histopathology.Results:The low-calcium diet had no effect on serum calcium levels. The low-calcium diet had the greatest effect on craniofacial bone growth, while the soft diet affected the growth of several bone sites that are attached to the masseter muscle. A low-calcium diet resulted in the deterioration of the connectivity of the trabeculae in the furcation region of the maxillary and mandibular first molar, while a soft diet resulted in the diffuse disappearance of trabeculae in the central part of the furcation regions. In the midpalatal suture, a low-calcium diet resulted in inhibition of cartilaginous ossification, although the midpalatal suture had a normal cartilaginous structure. A soft diet resulted in narrower cartilage cell layers in the midpalatal suture.Conclusions:We demonstrated that a low-calcium diet and a soft diet resulted in a deterioration of bone structures in both the maxilla and in the mandible; however, the mechanisms underlying these effects differed between diets.     

TM种植体-骨结合界面的显微CT观察

目的 研究TM种植体-骨结合界面及其上 1/3倒楔形间隙的成骨情况.方法 用医用钝钛钛棒加工成两组种植体,实验组为锥度5.44°、表面进行喷砂酸蚀处理的TM种植体,锥度从种植体上1/3处开始变化;对照组为仿straumann的表面喷砂酸蚀(sandblast large grit and acid-etching,SLA)圆柱状螺纹种植体.建立Beagle犬下颌骨种植模型,3只犬每只植入实验组TM种植体和对照组仿straumann -SLA圆柱状螺纹种植体各4枚,3只实验犬分别于4周、8周和12周处死,截取下颌骨行显微CT三维重建,观察种植体-骨结合界面及上1/3间隙的成骨情况.结果 8周时实验组TM种植体上1/3倒楔形间隙开始有骨修复,12周时对照组仿straumann-SLA种植体颈部骨质有吸收迹象,实验组TM种植体颈部骨质仍得到良好保存.结论 TM种植体能形成良好骨结合界面,体部上1/3的锥度设计可保存颈部皮质骨.     

不同时机牙移动对SD大鼠牙槽突裂植骨区骨改建的影响

目的:评价牙移动产生的功能性刺激对SD大鼠牙槽突裂植骨区骨改建的影响,探讨植骨后牙移动的合适时机。方法:选择16只56天的雄性SD大鼠,随机分为4组,按照已建立的外科诱导SD大鼠双侧牙槽突裂模型要求造裂,填塞骨蜡8周后,在双侧裂隙区同时植入大鼠自体髂骨松质骨,左侧为牙移动侧,分别在植骨后即刻、2周、4周、8周近中移动左侧第二磨牙进入植骨区,右侧为对照侧,第二磨牙不进行任何处理。加力牙移动4周后处死动物。通过Micro-CT扫描标本,运用Mimics 10.01软件计算双侧植骨区骨量,采用SAS 9.0软件包对双侧植骨区骨量进行配对t检验,对双侧植骨区骨量的差值进行组间方差分析。结果:各组的牙移动侧植骨区骨量均多于对照侧。0周组牙移动侧与对照侧植骨区骨量差值为0.87mm3,无显著差异(P>0.05);2周组和4周组牙移动侧与对照侧植骨区骨量的差值分别为1.7mm3和1.77mm3,有显著差异(P<0.05);8周组牙移动侧与对照侧植骨区骨量的差值为3.47mm3,有显著差异(P<0.01),8周组两侧植骨区骨量差值的均数与0周组、2周组和4周组均有显著差异(P<0.05)。结论:牙移动对植骨区的功能性刺激能抑制植骨区的骨吸收。植骨8周后的牙移动抑制植骨区移植骨吸收的作用最为明显。     

Repair processes of experimental root fractures in rat molars examined by histopathological techniques and 3D micro-CT imaging

AimsThe purpose of this study was to investigate the repair processes of experimental intra-alveolar root fractures of immature rat molars with histopathological techniques and 3-dimensional micro-computed X-ray tomography (3D micro-CT) imaging.MethodsTwelve left upper first molars of 4-week-old rats were dislocated toward the palate with modified Hoe's pliers at a load of 900 g for 20 s, and repositioned. After 1 or 2 weeks, the maxillae were dissected and scanned with micro CT for 3D micro-CT imaging. After standard histological preparation, buccolingual serial sections of the maxillae were stained with hematoxylin and eosin or Masson–Goldner stain and observed by light microscopy. Subsequently, we examined the identified root fracture lesions by 3D micro-CT imaging and histopathological sections.ResultsWe identified 6 intra-alveolar vertical incomplete fracture lines in the mesial roots. Histopathological findings showed that newly differentiated odontoblast-like cells had formed immature reparative dentin on the pulpal side of the fracture line at 1 postoperative week, and deposited reparative dentin with a tubular structure at 2 weeks. While surface resorption and granulation-tissue formation occurred on the periodontal side of the fracture line, the narrow fracture line remained unchanged, and the surface resorption lacunae were partly covered with cementum at postoperative 2 weeks.ConclusionsRoot-fracture investigation requires a combination of histopathological observation and 3D-CT imaging. Intra-alveolar fractured root repair accompanied by tubular reparative dentin formation at the pulpal side, and the deposition of cementum at the periodontal side, may occur when the fracture line is too narrow for the formation of granulation tissue.