A High Order Bound Preserving Finite Difference Linear Scheme for Incompressible Flows

We propose a high order finite difference linear scheme combined with a high order bound preserving maximum-principle-preserving (MPP) flux limiter to solve the incompressible flow system. For such problem with highly oscillatory structure but not strong shocks, our approach seems to be less dissipative and much less costly than a WENO type scheme, and has high resolution due to a Hermite reconstruction. Spurious numerical oscillations can be controlled by the weak MPP flux limiter. Numerical tests are performed for the Vlasov-Poisson system, the 2D guiding-center model and the incompressible Euler system. The comparison between the linear and WENO type schemes, with and without the MPP flux limiter, will demonstrate the good performance of our proposed approach.     

中日友好医院分型股骨头坏死腓骨植入治疗的三维有限元分析

文题释义：股骨头坏死中日友好医院分型的有限元分析：根据李子荣等提出的中日友好医院分型，建立股骨头坏死三维模型，分为 M型(内侧型)、C型(中央型)和 L型(外侧型)，其中 L型包括L1型(次外侧型)、L2型(极外侧型)和 L3型(全头型)。通过对建立的模型进行有限元分析，为该分型的保髋治疗提供了一定力学依据，显示外侧柱的存留是精准预防塌陷的重要因素，为进一步实现个体化治疗提供力学基础。 腓骨支撑坏死股骨头保髋手术：是对于早中期股骨头坏死需要保留股骨头患者进行的一种手术方式。首先需对股骨头进行髓芯减压，清除一定坏死骨，空腔填塞松质骨(髂骨为主)，打压结实后植入腓骨(异体或自体)支撑，给坏死区的提供力学支撑及生物学修复，预防股骨头进一步坏死及塌陷。 背景：研究报道股骨头坏死的保髋疗效与外侧柱存留密切相关，中日友好医院分型是根据三柱结构确立的，对股骨头塌陷的预测准确性高。 目的：建立股骨头坏死中日友好医院分型各分型仿真的三维有限元模型，通过有限元分析各分型腓骨植入的力学变化，探讨外侧柱存留对保髋疗效的意义，为该分型的塌陷精准预测提供基础。 方法：建立正常股骨头、中日友好医院分型(M型、C型、L1型、L2型、L3型)股骨头坏死及其腓骨植入3组11种三维有限元模型，运用ANSYS软件进行有限元分析计算，观察各组模型的最大应力值、最大位移值及股骨头内部载荷传递模式。 结果与结论：①坏死组位移最大，应变最大，且因坏死分型不同而位移不同，位移变化如下：M型相似文献   

National level data analysis of facial lacerations in Korea using the National Health Insurance Service (NHIS) database

No national epidemiological investigations have been conducted recently regarding facial lacerations. The study was performed using the data of 3,634,229 people during the 5-year period from 2014 to 2018 archived by the National Health Information Database (NHID) of the Health Insurance Review and Assessment Service. Preschool and children under 10 years old accounted for about one-third of patients. Facial lacerations were concentrated in the “T-shaped” area, which comprised forehead, nose, lips, and the perioral area. The male to female ratio for all study subjects was 2.16:1. Age and gender are significantly related with each other (P < .001). Mean hospital stays decreased, and numbers of outpatient department visits per patient were highest for hospitals and lowest for health agencies. Over the study period, hospital costs per patient in tertiary and general hospitals increased gradually. Preschool and school-aged children are vulnerable to trauma. Male patients outnumbered female patients by a factor of more than 2. The “T-shaped’” area around forehead is vulnerable to injury. Total cost of medical care benefits per patient in tertiary hospitals was about 7 times on average than in health agencies. Regarding functional, behavioral, and aesthetic outcomes, more attention should be paid to epidemiologic data and hospital costs for facial lacerations.     

膝关节运动过程的应力数值模拟

目的观察膝关节关节面在整个运动过程中的应力、应变分布范围、大小及变化规律。方法利用有限元数值模拟方法对行走过程中膝关节关节面应力、应变情况进行分析。结果与结论行走过程中关节面产生应力、应变随时间推移而增加，并且变化规律近似的服从抛物线变化。通过对不同体重的人在行走时膝关节面上产生的应力分析得出，体重对关节面上的应力的大小并不产生重大影响，体重带来的应力差异仅占总应力的10％。     

Increase in Power through Multivariate Analyses

Power to detect genetic and environmental influences increases not only with sample size but also with the number of measurements through longitudinal and/or multivariate designs, if those measurements correlate with each other. Power simulations are presented for uni- through quadrivariate cases, with differing genetic and environmental parameters. Even though subject attrition is a problem for most longitudinal studies, the gain in power available may more than make up for this shortcoming in many situations. In terms of planning studies to examine genetic and environmental influences, power calculations should not only consider sample size but number of measurements on particular phenotypes and their intercorrelations.     

人机工程学工作分析方法在体力劳动负荷评价中的应用

对鞍钢耐火厂、炼钢厂22个工种分别进行体力劳动负荷的人机工程学分析及劳动强度测定。调查表明,两种方法所得结果基本一致,但人机工程学分析方法简便,易于基层单位推广应用。     

腰椎节段形态对峡部、小关节应力及小关节接触力影响的有限元分析

目的:探讨腰椎形态结构变化对峡部裂性滑脱及小关节退变的作用和意义。方法:采用改良的“非种子区域分割方法”及非平行“最佳切割平面”等一系列新型计算机辅助设计(CAD)方法精确建立包括椎间盘高度、腰椎小关节角、椎间盘前凸角改变的L4~L5活动节段有限元模型;在2700N轴向压缩载荷条件下,分别对各有限元模型的峡部、小关节应力、小关节接触力以及椎间盘负载进行测试。结果:压缩载荷下,腰椎活动节段峡部、小关节等效应力及小关节接触力随椎间盘高度的减小而减小,随小关节角的增大而增加,随椎间盘前凸角的增加而减小。结论:椎间盘高度、腰椎小关节角、椎间盘前凸角等形态结构变化对腰椎节段有限元模型的峡部、小关节应力及小关节接触力有明显的影响。提示腰椎峡部应力性骨折及小关节退变的发生与椎间盘高度、腰椎小关节角、椎间盘前凸角等解剖形态因素有关。     

Three-Dimensional Soft Tissue Prediction Using Finite Elements

Abstract Background and Aim: The prediction of soft tissue esthetics is important for achieving an optimal esthetic outcome in orthodontic treatment planning. Applicable procedures have so far been restricted to two-dimensional profile predictions that have not proven to be very reliable. The goal of this investigation was therefore to develop a novel finite element-based procedure that allows a three-dimensional, easily visualized, quantitative analysis and prediction of soft tissue behavior for the clinician. The procedure to be developed should be easy to handle and not entail any additional radiation exposure for the patient. Material and Methods: Using a three-dimensional scanner, the facial surfaces of 20 probands were digitalized and individual FEM models were generated. Results: After reduction of data redundancy via several conversion steps, a patient-specific simulation model was prepared consisting of 20,000 to 40,000 individual elements to which specific physical properties could be assigned. The average time required for generating a virtual model was 50 minutes. Problems occurring during model generation were rare (mainly shadowing phenomena and movement artifacts). Conclusion: The procedure outlined herein makes the reliable generation of patient-specific simulation models possible for facial soft tissue prediction in orthodontics.     

铰链式冠外附着体的结构强度分析

目的探讨铰链式冠外附着体设计的合理性.方法采用有限元应力分析的实验方法,分析铰链式冠外附着体阳性结构L形球体的应力分布情况,对其结构强度进行测试.结果在附着体阳性结构L形球体的转角处应力最大,应力值为321.847MPa.结论该铰链式附着体的结构强度符合临床设计要求.     

冠心病患者血糖与微量元素的相关性研究

为探讨冠心病患者血糖与微量元素的关系，用电感耦合等离子体原子发射光谱法测定了７８例冠心病患者的６种微量元素变化，并与血糖做相关分析．结果冠心病患者高血糖组与正常血糖组相比，血清铁、铅、镉显著增高，锌和铬显著降低，Ｐ＜００５或００１，铜无显著性差异；血糖与血清铁、铅呈显著性正相关，与血清铬、锌呈显著负相关，而与铜、镉相关不显著．表明部分微量元素的不平衡构成对冠心病的危险因子———高血糖的促发作用，调整人群中微量元素的不平衡状态，对减少冠心病及糖尿病的发生可能有利