Sutureless bowel anastomosis using Nd:YAG laser

Small bowel anastomoses were performed without sutures by using the Nd:YAG laser to produce welded enterotomies. Optimal energy levels for contact and noncontact laser were determined. Anastomoses produced using five target energy levels between 100 and 500 J were examined. Short-term anastomotic strength of these enterotomies was measured 1 min after the welding. Bursting pressure of the laser welded enterotomies was compared to the bursting pressure of traditional two-layer, inverting, interrupted sutured bowel anastomoses. The overall mean bursting pressure of non-contact-welded enterotomies was 50.6 mmHg. Optimal laser settings determined in this initial phase were then used to produce anastomoses in rabbits which are recovered postoperatively for 1 or 2 weeks in order to examine long-term viability and integrity of the anastomoses. All chronic rabbit preparations recovered without complication. The mean bursting pressure was 200 mmHg, not significantly different from that of uncut bowel or two-layer sutured anastomosis.     

Progressive motor syndrome in a welder with pallidal T1 hyperintensity on MRI: A two-year follow-up.

Chronic exposure to manganese (Mn) fume during welding may lead to mainly extrapyramidal syndrome that is resistant to treatment. We present a 32-year-old patient who developed severe postural instability, Parkinsonism, dystonia, and pyramidal signs in the 10th year of welding. The neurological condition of the patient worsened markedly in the following 3 years, resulting in severe disability rendering him to be assisted in all his daily activities and he did not benefit from any dopaminergic agent. T1 sequences of the MRI of the brain showed pallidal hyperintensity symmetrically. Welders in our country often protect their eyes but ignore to use tools that protect them from inhalation of the fume. Since chronic Mn toxicity may cause serious disability and irreversible neurological disturbances, we strongly believe that it is necessary to inform welders and their employers about this potential hazard.     

Occupational chronic exposure to metals

Summary Stainless steel welders (n = 103) were examined. To estimate external exposure, personal air sampling was used. Internal exposure was quantified by the determination of nickel levels in erythrocytes, plasma and urine. Men and women (n = 123) were examined for control purposes. In the plasma and erythrocytes of the controls the nickel concentration was below the level of detection (< 1.81 μg/l). The element concentrations in urine were between < 0.1 and 13.3 μg/l. Of the controls 95% showed nickel levels in urine below 2.2 μg/l (reference value). The average concentration of nickel in the air was 93 ± 81 μg/m³. The average concentration of nickel in the plasma samples was 4.9 ± 4.0 μg/l (95th percentile 12.8 μg/L). In erythrocytes nickel could not be detected. The nickel concentrations in the urine of the welders were 18.5 ± 28.5 μg/l on average (95th percentile 52.5 μg/l). Only a weak correlation between the nickel levels of plasma and urine could be detected (C_urine = 2.07 + 8.45 C_plasma; r = 0.294; p < 0.01). Based on our results and on the reported literature a future limit value for the nickel concentration in urine should lay between 30 and 50 μg/l. This value corresponds to an external exposure of 500 μg nickel per cubic metre.     

Exposure to soluble barium compounds: an interventional study in arc welders

Summary Soluble barium (Ba) compounds are well-known toxicants. Intoxications are mainly known in an acute form from casual or suicidal oral ingestion. No scientifically based data are available on possible health effects of inhalative exposure to soluble Ba salts at the workplace. Therefore, we investigated 18 welders in an interventional study over 1 week. They performed welding of Ba-containing stick electrodes and self-shielded flux cored wires under conditions similar to real working conditions. The welding fumes contained 31%–37% Ba, more than 90% of which was soluble in acids. Without appropriate preventive measures, a high rate of measurements exceeded the TLV values for total welding fumes of 5 mg/m³ and for soluble Ba of 0.5 mg/m³. The median fume concentrations were 13.2 mg/m³ in stick electrode welding and 12.3 mg/m³ in flux cored wire welding. The median Ba concentrations were 4.4 and 2.0 mg/m³ respectively. An integrated exhaust system built into the gun proved to be efficient in flux cored wire welding. The internal exposure to Ba reached median urine levels up to 101.7 g/l (normal: below 20 g/l) and median plasma concentrations of up to 24.7 g/l (normal: below 8 g/l). No health impact on the welders could be proven, but hypokalemia may have occurred as a result of the Ba exposure.     

用金属磁记忆方法进行缺陷检测

介绍了金属磁记忆检测的原理及其应用方法。铁磁性工件在载荷的作用下,应力和变形集中区会产生最大的漏磁场变化,对漏磁场法向分量的测定可以准确地推断工件的应力集中区。通过对14块对接焊缝钢板分别用磁记忆、超声波方法进行实际检测,验证了磁记忆检测方法的有效性,取得了一些有益的经验。     

Morphology,Microstructure, and Mechanical Properties of S32101 Duplex Stainless-Steel Joints in K-TIG Welding

In this paper, the {"type":"entrez-protein","attrs":{"text":"S32101","term_id":"422005","term_text":"pir||S32101"}}S32101 duplex stainless steel welded joints were produced by a K-TIG welding system. The weld geometry parameters under different welding speeds were analyzed by combining the morphological characteristics of the keyhole. The microstructure and impact toughness of the base metal and weld metal zone under different welding speeds were studied. The experiment results show that the welding speed has quite an effect on the geometry profile of the weld. In addition, the characteristic parameters of the keyhole can effectively predict the geometry profile of the weld. The test results prove that the microstructure, Σ3 coincidence site lattice grain boundary, and phase boundary of ferrite and austenite have an effect on the impact property of the weld metal zone. When the proportion of the austenite, Σ3 coincidence site lattice grain boundary and random phase boundary increased, the impact property of the weld metal zone also increased.     

Substituting Resistance Spot Welding with Flexible Laser Spot Welding to Join Ultra-Thin Foil of Inconel 718 to Thick 410 Steel

This paper investigated various aspects of replacing existing micro-resistance spot welding (micro-RSW) with micro-laser spot welding for joining Inconel 718 thin foils to thick 410 steel stack-up to allow faster, non-contact joining together with flexibility in spot positioning and removal of tip dressing required for RSW electrodes. The joint quality was evaluated based on the mechanical strength, microstructural characteristics and joint strength at elevated temperature as these joints are often used for high-temperature applications. Experimental investigations were performed using micro-RSW and micro-laser spot welding to obtain the 90° peel and lap shear specimens, each comprising four spots. The obtained strength from laser joints was significantly higher than that of micro-RSW joints due to larger weld nugget formation and interface width. The process map for obtaining good quality welds was also identified, and about a 17% reduction in joint strength was obtained when welded specimens were subjected to elevated temperature (i.e., 500 °C) in comparison with room temperature. This reduction was compensated for using the flexibility of laser welding to add two extra spots. The overall performance of the micro-laser spot welds was found to be better than the micro-RSW considering joint strength, flexibility in placing the spots and time to produce the welds.     

Numerical Case Studies about Two-Dimensional CHS Joints with Symmetrical Full-Overlapped Top-Connection

Steel joints made out of circular hollow section profiles are used for many fields of applications, such as wide-span or representative halls for airports. By connecting two inclined pipes to a vertical third pipe, a ramified vertical column is created, where the node is the weakest point in the structure due to the geometrical heterogeneity. The current standards and Design Codes have limitations regarding the geometrical properties of hollow sections joints. However, the kind of steel joint presented in this paper is excluded in the current standards. This paper is about numerical FEA case studies of two-dimensional, circular hollow-section joints to figure out the resistance of atypical steel joints. In the first step, a small-scale model is generated to analyze the influence of the inclination. In the second step, the geometries of the different pipes are extended. The influence of the inclination angle and the stability of the joint are analyzed. It was discovered that the inclination angle between the three pipes has a large influence on the stresses and deflections at the node. By increasing the inclination angle, the maximum applied force can be increased. The extended members change the behavior and the stress distribution.