运动学对线应用于全膝关节置换术的研究进展

全膝关节置换术是目前治疗终末期膝关节骨性关节炎最有效的方法之一，全膝关节置换术后膝关节功能、术后膝关节疼痛与术后下肢力线有着密切的关系。目前膝关节置换术下肢对线方式主要采用机械力学对线方法，该方法可以改善膝关节功能，但是有部分患者也会产生术后膝关节的疼痛、活动受限等并发症，导致术后患者满意度较差。近些年越来越多的研究开始关注运动力学对线技术并应用于临床。运动学对线技术旨在重建患者的解剖结构，将膝关节假体运动轴与膝关节生理性运动轴保持一致，减少膝关节周围软组织和韧带的松解，实现膝关节生理性运动。该文就运动力学对线方法在全膝关节置换术中的应用进展作一综述。     

胎儿小脑蚓部不同超声纹理特征与胎儿畸形关系的初探郭永华 肖宝军

目的：总结后颅窝正常和异常的胎儿小脑及小脑蚓部的矢状面的声像学特征,了解小脑细微结构的改变与胎儿畸形的关系。     

Orthogonally oriented scaffolds with aligned fibers for engineering intestinal smooth muscle

Controlling cellular alignment is critical in engineering intestines with desired structure and function. Although previous studies have examined the directional alignment of cells on the surface (x–y plane) of parallel fibers, quantitative analysis of the cellular alignment inside implanted scaffolds with oriented fibers has not been reported. This study examined the cellular alignment in the x–z and y–z planes of scaffolds made with two layers of orthogonally oriented fibers. The cellular orientation inside implanted scaffolds was evaluated with immunofluorescence. Quantitative analysis of coherency between cell orientation and fiber direction confirmed that cells aligned along the fibers not only on the surface (x–y plane) but also inside the scaffolds (x–z & y–z planes). Our study demonstrated that two layers of orthogonally aligned scaffolds can generate the histological organization of cells similar to that of intestinal circular and longitudinal smooth muscle.     

Association of quadriceps angle with plantar pressure distribution,navicular height and calcaneo-tibial angle

ObjectiveThe aim of study was to analyze the association between Quadriceps Angle (QA) and plantar pressure, navicular height (NH), and calcaneo-tibial angle (CTA).MethodsA total of 64 volunteers (mean age: 22.25 ± 2.54 (range:19–33)) participated in this cross sectional study. EMED-m (Novel GmbH, Germany) electronic pedobarograph was employed for dynamic plantar pressure measurement using two step protocol. The angle between the vertical axis of calcaneus and the long axis of Achilles tendon for CTA. The height of navicular tubercle from the ground was measured while the subject was standing on both feet for NH. QA was measured while the subject was standing in a relaxed posture where both feet bearing equal weight.ResultsThere were significant negative correlations between QA and maximum force (MxF) under the 4th. metatarsal head (MH4). The QA was also significantly correlated with MxF and force-time integral (FTI) under the bigtoe (BT). FTI under the 3rd. metatarsal head (MH3), MH4 and 5th. metatarsal head (MH5) were significantly negatively correlated with QA. Pressure-time integral (PTI) under the MH4 and MH5 were found to be significantly negatively correlated with QA. A significant correlation was also found between QA and NH (p < 0.0001), whilst there was no correlation between QA and CTA. Regression analysis showed that NH was appeared as the major contributor for the QA (β = −0.49, p < 0.001) in the dynamic condition, followed by BT-FTI (β = 0.37, p < 0.001) and MH5-MxF (β = −0.21, p < 0.037).ConclusionThese findings may imply that the NH which can at least be controlled by appropriate shoe inserts may affect QA. This way, loading pattern of both plantar region and whole lower extremity may be altered.Level of evidenceLevel III, Diagnostic Study.     

Effect of Day Optimizing Throughput (Dot) Knee Software Implementation on Magnetic Resonance Imaging Workflow Efficiency

PurposeAttempts by magnetic resonance (MR) manufacturers to help imaging centres improve patient throughput has led to the development of more automated acquisition. This software is capable of customizing individual scan alignment; potentially improving imaging efficiency and standardizing protocols. However, substantial investments are required to introduce such systems, potentially deterring their widespread application. This study assessed the implementation costs and reduction in examination durations for automated knee MR imaging (MRI) software.Materials and MethodsResearch activities were performed at a community-based academic centre on a 3-Tesla (3-T) system using Siemens' Day Optimizing Throughput (Dot) knee software. Examination acquisition times were extracted from the system before and after software implementation. Fiscal year 2012/13 finances were used to determine the average hourly cost of MRI utilization. Costs associated with automated software implementation were also calculated. Finally, the number of knee scans required to achieve a positive return on investment using the software was established.Results and DiscussionThe mean (standard deviation, sample size) pre- and post-Dot software scan times were 23.20 (4.18, n = 266) and 21.94 (4.51, n = 59) minutes, respectively, for a routine knee scan and 11.88 (1.60, n = 74) and 11.24 (1.51, n = 27) minutes, respectively, for a fast knee scan. The overall weighted average resulted in a 64-second time savings per automated knee examination. This negligible time savings would be extremely difficult to make use of clinically. Dot simplified 29 unique knee protocols to two, improving the consistency of knee examinations. Current Dot software is not compatible with all patients and therefore has limitations that are a concern among MR technologists.ConclusionAdoption of automated knee systems could assist in standardizing protocols; however, the cost of implementation and difficulty in modifying patient scheduling to reflect the minimal time savings would make a financial return unlikely to occur at small- and medium-sized institutions.     

No Correlation Between Clinical Outcomes and Changes in the Tibia-Metaphyseal Angle Following Total Knee Arthroplasty: A Retrospective Study

BackgroundDespite numerous advances in the implant design and surgical technique, improvement in patient satisfaction following total knee arthroplasty (TKA) has plateaued. Various TKA alignment strategies have been introduced that impact the coronal positioning of the tibial component relative to the native joint line. This study aims to analyze if postoperative variance of the joint line from preoperative native alignment is correlated with changes in patient-reported outcomes following primary TKA.MethodsA retrospective review of an academic center’s patient population identified all primary TKAs between 2013 and 2021 with full-length, standing radiographs and patient-reported outcome measures (PROMs) data. These measures included the Knee injury and Osteoarthritis Outcome Score for Joint Replacement, Patient-Reported Outcome Measurement Information System, and Veterans RAND 12 scores. Preoperative and postoperative radiographic measurements for hip-knee angle, tibia-metaphyseal angle, tibial-axis orientation angle, and joint-line obliquity angle were recorded. Three-month, 1-year, and 2-year PROM scores were correlated with the change in degrees for each of the angles using a Spearman’s correlation. A Mann-Whitney U-test was used to compare angular changes with a change in PROM scores.ResultsOne hundred and ninety nine patients (204 knees) with a mean age of 67 years were included. Average follow-up was 23 months. Three-month, 1-year, and 2-year follow-up rates were 93%, 64%, and 34%, respectively. Improvements were seen across all PROMs regardless of an angular change.ConclusionThere were no clear correlations between PROMs and variation in joint line obliquity in the coronal plane. These data suggest that the magnitude of the variation in coronal tibial alignment from native alignment does not impact PROMs. Further study is indicated to correlate an angular change with functional measures.     

腰椎峡部裂型滑脱症矢状位参数分析

[目的]探讨L5峡部裂型滑脱症病人腰骶部的矢状位参数的相关性及其临床意义。[方法]回顾2000年1月~2005年12月资料完整的L5峡部裂型滑脱症76例,男32例,女44例;年龄12~68岁,排除其他腰椎节段病变及下肢畸形,在包含双侧股骨头的腰椎站立位侧位片上测量腰椎前凸角(LL)、骨盆入射角(PI)、骶骨水平角(SS)、腰骶角(LSA)及滑移度等参数,并与30例健康成人比较,用t检验比较滑脱病人与健康成人、轻度滑脱和重度滑脱病人各参数之间的差异,Pearson相关系数分析各参数间的相关性(P<0.05)。[结果]根据M eyerd ing分类,轻度滑脱53例(Ⅰ、Ⅱ度),重度滑脱23例(Ⅲ、Ⅳ度)。腰椎滑脱患者的PI、LL、SS、LSA均较健康成人高,差别有统计学意义(P<0.001)。重度滑脱病人的PI、LL、LSA均较轻度滑脱的病人高,差别有统计学意义(P<0.001)。PI与滑移度、SS、LL及LSA有显著相关性,LSA与滑移度、SS与LL有显著相关性,但SS与滑移度无显著相关。[结论]骨盆的矢状位形态对滑脱的发展有直接影响,PI越大,发生滑脱的风险越大,PI、LSA越大,滑脱进展的可能性越大。     

Two-level posterior lumbar interbody fusion for degenerative disc disease: improved clinical outcome with restoration of lumbar lordosis

BACKGROUND CONTEXT: Although posterior lumbar interbody fusion (PLIF) for degenerative lumbar diseases is routine, there are few reports on double-level PLIF. PURPOSE: To evaluate the clinical outcomes of double-level PLIF. STUDY DESIGN/SETTING: A retrospective study of operated cases in Gifu, Japan. PATIENT SAMPLE: Nineteen patients (8 men and 11 women, 59.5+/-10.2 years) who underwent double-level PLIF between 1996 and 2001. OUTCOME MEASURES: Operation time, blood loss, complications, the Japanese Orthopaedic Association (JOA) score for back pain and lumbar sagittal alignment were evaluated. METHODS: Patients were examined retrospectively at follow-ups of 3.6+/-1.7 years. Primary diseases were spondylolisthesis, spinal canal stenosis, degenerative scoliosis and herniated intervertebral disc. Fusion areas were L3 to L5 in 15 cases and L4 to S1 in 4 cases. RESULTS: The mean JOA score increased from an initial score of 12.9+/-3.5 to 21.3+/-4.9 at the final follow-up. There was a positive correlation (R=0.718, p<.001) between the increase in lordotic angle and the increase in the JOA score. Several parameters suggested that the surgical invasiveness was not minimal. CONCLUSION: Double-level PLIF provided satisfactory results and preserved lumbar spine lordosis.     

上矢状窦旁脑膜瘤致上矢状窦阻塞时侧支静脉通路的意义

目的 分析上矢状窦旁脑膜瘤致上矢状窦(SSS)阻塞时其侧支静脉通路的建立情况，确定其在肿瘤切除术中的意义。方法 总结归纳86例上矢状窦旁脑膜瘤行MRA及DSA检查时的静脉系表现。结果 27例发生SSS完全阻塞，59例部分阻塞。18例在阻塞的SSS周围出现了由表浅皮层静脉所形成的侧支静脉环；通过表浅皮层静脉与蝶顶窦及小脑幕静脉系建立端—端吻合的16例；通过与Troland或Labbe静脉建立吻合的14例；通过大脑镰与下矢状窦吻合的9例；通过脑膜静脉并经板障静脉引流到颈外静脉系的17例；混合型12例。结论 上矢状窦旁脑膜瘤致SSS阻塞时，肿瘤周围存在广泛侧支静脉通路，术中应注意保护。脑DSA及MRA检查对术前了解SSS通畅性及侧支静脉通路建立有帮助。     

国人上矢状窦窦腔内结构的内镜解剖

目的观察国人上矢状窦窦腔内结构，特别是纤维索和蛛网膜颗粒的完整解剖形态。方法成人头颅标本5具，去除颅盖，应用内镜观察研究上矢状窦窦腔内纤维索及蛛网膜颗粒的原始结构特征；并纵行剖开管腔，显微镜下观察纤维索、蛛网膜颗粒。结果内镜下观察上矢状窦管腔内纤维索大致分3种类型：瓣膜状（47．1％）、小梁状（30．6％）、板层状（22．3％）。蛛网膜颗粒多集中于上矢状窦中段侧壁及静脉隐窝处呈指状突起突入窦腔。结论内镜较常规解剖手段可以更直观地观察上矢状窦窦腔内结构的完整形态特征。