Macroporous thin membranes for cell transplant in regenerative medicine

The aim of this paper is to present a method to produce macroporous thin membranes made of poly (ethyl acrylate-co-hydroxyethyl acrylate) copolymer network with varying cross-linking density for cell transplantation and prosthesis fabrication. The manufacture process is based on template techniques and anisotropic pore collapse. Pore collapse was produced by swelling the membrane in acetone and subsequently drying and changing the solvent by water to produce 100 microns thick porous membranes. These very thin membranes are porous enough to hold cells to be transplanted to the organism or to be colonized by ingrowth from neighboring tissues in the organism, and they present sufficient tearing stress to be sutured with surgical thread. The obtained pore morphology was observed by Scanning Electron Microscope, and confocal laser microscopy. Mechanical properties were characterized by stress–strain experiments in tension and tearing strength measurements. Morphology and mechanical properties were related to the different initial thickness of the scaffold and the cross-linking density of the polymer network. Seeding efficiency and proliferation of mesenchymal stem cells inside the pore structure were determined at 2 h, 1, 7, 14 and 21 days from seeding.     

软质聚氨酯泡沫塑料用于植皮手术包扎的临床与实验研究

目的 通过临床与实验研究选择合适的皮片游离移植手术包扎材料.方法 实验分别以软质聚氨酯泡沫塑料、层叠干纱布、松散干沙团和干棉花团为测试包扎材料.分别在测试包扎材料上加压,记录血浆袋所受到的压力和包扎材料厚度压缩比例的变化;临床常规方法片皮移植,以软质聚氨酯泡沫塑料块加压包扎皮片.结果 软质聚氨酯泡沫塑料当外加压力使其压缩至原厚度的90%～34%时,可使皮片受到25 cmH2O～54.4 cmH2O的压力;此压力范围足以使皮片与创面密切接触,保证皮片成活,又避免过大的压力影响皮片血供重建.以软质聚氨酯泡沫塑料为包扎材料植皮,皮片成活率明显提高.结论 软质聚氨酯泡沫塑料是一种良好的植皮包装材料.     

芳香PET树脂母粒的研制

通过丙烯酸和丙烯酸正丁酯溶液共聚合，得到丙烯酸－丙烯酸正丁酯共聚物，该树脂与环氧氯丙烷反应后再与PET树脂切片继续反应，可使PET树脂切片表面形成聚丙烯酸酯自膨润型吸油网络结构，将表面具有聚丙烯酸酯自身膨润型吸油网络结构的PET树脂切片（简称为留香剂）在油溶性香精中浸泡，香精就被吸附在留香剂表面，即得到芳香PET树脂母粒。用SEM观察了母粒的表面结构形态。     

溶剂在嵌段共聚高分子膜中的溶解与传递现象

利用石英弹簧称重法测定了308．15K时乙醇和苯在含端羟基聚丁二烯(HTPB)和端羟基聚丁二烯／丙烯腈共聚物(HTBN)的嵌段共聚聚氨酯膜中的吸收动力学曲线。结合吸收-络合吸附双模式传递模型，研究了聚氨酯膜的微相分离程度、软硬段的比例和组成以及软段分子量等因素对溶剂在膜中溶解和传递性质的影响。     

多官能度活性橡胶增韧环氧树脂的研究：Ⅲ.三元共混增韧环氧树脂

本文研究了双酚A对多官能度环氧基和羧基聚丙烯酸正丁酯橡胶增韧环氧树脂的影响。结果表明,加入双酚A,拉伸断裂能有大幅度提高,同时不降低弹性模量。这可能是由椽胶提高断裂伸长与双酚A提高屈服应力产生协同效应的结果。对羧基橡胶增韧的三元共混体系,拉伸断裂能随羧基官能度上升而增加。断裂面的形态研究表明,由于羧基橡胶与双酚A的酯化反应,大大减少了羧基橡胶聚集对增韧的不利影响。     

丙烯酸酯共聚物涂膜中钛螯合物的交联作用

用红外光谱、紫外光谱、差示扫描量热等手段表征了掺杂体系内钛螯舍物(Ti-Ac)与丙烯酸酯共聚物的相互作用。测试了Ti-Ac用量对涂膜耐水性、耐热性及复溶性的影响。鲒果表明。当ωTi-Ac=0．015时涂膜的吸水率可下降到1％以下。且涂膜仍保持较好的复溶性(15s)。     

聚氨酯避孕套临床前使用可行性和可接受性分析

目的 对使用新型聚氨酯(Pu)男用避孕套的可行性和可接受性进行初步观察。方法 对30对健康已婚夫妇为期6周360次使用国产PU避孕套的效果进行问卷调查。结果 避孕套总破裂率(临床破裂 非临床破裂)为2．22％，临床滑脱率为16．5％，使用观察期间无意外妊娠发生。结论 新型PU避孕套的破裂率和滑脱率分别相近于和高于报道的乳胶避孕套使用情况，感官指标反映PU避孕套具有良好的可接受性。     

亲水性聚氨酯宫颈扩张棒在引产中的应用

初产妇30例,用亲水性聚氯酯泡沫宫颈扩张棒(简称“扩张棒”)作人工剥膜与破膜加催产素引产前扩张宫颈,同时以条件类同初产妇30例进行对照。扩张棒组置棒前宫颈成熟度评分为2.93±0.91,对照组为3.7±0.88,两组无显著差异:扩张后宫颈评分为6.13±1.22,与扩张前有显著差异(P<0.05)。扩张棒组引产成功率为92.6%,而对照组为64.3%,差异非常显著(P<0.01),同时能缩短产程。本组用扩张棒组引产的30例,无一例发生产时、产后感染。     

氨乙基氨丙基聚二甲基硅氧烷改性水性聚酯型聚氨酯的研究

由聚酯二元醇、异佛尔酮二异氰酸酯和二羟甲基丙酸合成聚氨酯预聚体，以氨乙基氨丙基聚二甲基硅氧(AEAPS)为扩链剂，制备了AEAPS改性聚氨酯水分散液。与未改性的聚氨酯水分散液相比，AEAPS改性聚氨酯水分散液的粒径增大，但粒径分布和表面张力基本不变，说明疏水的聚二甲基硅氧烷侧链被包裹于分散颗粒的内部；此外，改性聚氨酯水分散液的冻融稳定性显著增强。AEAPS改性聚氨酯水分散液成膜后，吸水率明显下降，水在膜表面的接触角增加，400℃时热失重下降，具有良好的疏水性和耐热性。     

Bulk and Solution Copolymerization of Butyl Acrylate/Methyl Methacrylate at Elevated Temperatures

A series of bulk and solution (in toluene) copolymerizations of butyl acrylate/methyl methacrylate were performed independently at two laboratories. The runs were at elevated temperatures ranging from 90 to 140 °C conducted to high conversion levels, and samples were characterized for conversion, cumulative copolymer composition and number‐ and weight‐average molecular weights and distribution. Variation of the comonomer feed composition, temperature, and the solvent, initiator and chain transfer agent concentrations was studied. Using a mechanistic model, conversion data were predicted to high conversions using terminal model kinetics at 90 and 115 °C. The copolymer composition data conformed to the terminal kinetic model over the entire temperature range. Solvent effects were reflected by changes in the butyl acrylate rate constants.

Composition vs. conversion. Effect of feed composition for runs at 140 °C.