A Proposal for an Alternative Approach to Particle Size Method Development During Early-Stage Small Molecule Pharmaceutical Development

Particle size analysis in the pharmaceutical industry has long been a source of debate regarding how best to define measurement accuracy; the degree to which the result of a measurement or calculation conforms to the true value. Defining a “true” value for the size of a particle can be challenging as the output of its measurement will differ because of variations in measurement approaches, instrumental differences and calculation methods. Consequently, for “real” particles, a universal “true” value does not exist and accuracy is therefore not a definable characteristic. Accordingly, precision is then a measure of the ability to reproducibly achieve a measurement of unknown relevance.This article proposes, in place of accuracy, a means to define the “appropriateness” of a measurement in line with the critical quality attributes (CQA) of the material being characterized. The decision as to whether the measurement is correct should involve a link to the CQA; that is, correlation should be demonstrated, without which the measured particle size cannot be defined as a critical material attribute.Correspondingly, methods should also be able to provide sufficient precision to demonstrate discrimination relating to variation in the CQA. The benefits and challenges of this approach are discussed.     

Biodegradable Polydioxanone Microspheres for Transcatheter Arterial Embolization: Proof of Principle

PurposeTo evaluate feasibility, embolization success, biodegradability, reperfusion, and biocompatibility of biodegradable microspheres (MS) made from polydioxanone (PDO) for transcatheter arterial embolization.Materials and MethodsUnilateral selective renal embolization of a segmental artery was performed in 16 New Zealand White rabbits with PDO-MS (100–150 μm and 90–315 μm). Animals were randomly assigned to different observation periods and underwent control digital subtraction angiography (DSA) and MR imaging immediately (n = 3), 1 week (n = 2), 4 weeks (n = 2), 8 weeks (n = 2), 12 weeks (n = 5), and 16 weeks (n = 2) after embolization. Kidneys were harvested for macroscopic and histologic analysis of embolization success, biodegradability, and biocompatibility.ResultsEmbolization was technically successful in 15 of 16 animals. One animal died of anesthesia-related circulatory failure. The 100–150 μm MS were injected easily through 3-F catheters; the 90–315 μm MS tended to clog with intermittent catheter obstruction. DSA and MR imaging showed successful target embolization in 13 of 15 animals. In 2 animals, the entire kidney was affected owing to catheter clogging, including a reflux of MS while flushing. Control DSA and MR imaging showed increasing vascular reperfusion with time. Macroscopic and histologic analysis revealed necrosis/infarction in areas in which embolization was achieved. MS were extensively degraded after 16 weeks, and overall inflammatory reaction was mild.ConclusionsBiodegradable PDO-MS induced effective embolization of target vessels while demonstrating good biocompatibility. MS increasingly dissolved at 16 weeks, partial reperfusion started at week 1, and complete reperfusion started at week 8, thus offering possible advantages as a temporary embolic agent.     

Deep learning with biopsy whole slide images for pretreatment prediction of pathological complete response to neoadjuvant chemotherapy in breast cancer：A multicenter study

IntroductionPredicting pathological complete response (pCR) for patients receiving neoadjuvant chemotherapy (NAC) is crucial in establishing individualized treatment. Whole-slide images (WSIs) of tumor tissues reflect the histopathologic information of the tumor, which is important for therapeutic response effectiveness. In this study, we aimed to investigate whether predictive information for pCR could be detected from WSIs.Materials and methodsWe retrospectively collected data from four cohorts of 874 patients diagnosed with biopsy-proven breast cancer. A deep learning pathological model (DLPM) was constructed to predict pCR using biopsy WSIs in the primary cohort, and it was then validated in three external cohorts. The DLPM could generate a deep learning pathological score (DLPs) for each patient; stromal tumor-infiltrating lymphocytes (TILs) were selected for comparison with DLPs.ResultsThe WSI feature-based DLPM showed good predictive performance with the highest area under the curve (AUC) of 0.72 among the cohorts. Alternatively, the combination of the DLPM and clinical characteristics offered a better prediction performance (AUC >0.70) in all cohorts. We also evaluated the performance of DLPM in three different breast subtypes with the best prediction for the triple-negative breast cancer (TNBC) subtype (AUC: 0.73). Moreover, DLPM combined with clinical characteristics and stromal TILs achieved the highest AUC in the primary cohort (AUC: 0.82) and validation cohort 1 (AUC: 0.80).ConclusionOur study suggested that WSIs integrated with deep learning could potentially predict pCR to NAC in breast cancer. The predictive performance will be improved by combining clinical characteristics. DLPs from DLPM can provide more information compared to stromal TILs for pCR prediction.     

Inline Balloon Occlusion–Assisted Delivery of Ethylene Vinyl Alcohol Copolymer for Peripheral Arterial Applications: A Multicenter Case Series

PurposeTo assess the feasibility, safety, and efficacy of balloon-assisted delivery of ethylene vinyl alcohol copolymer (EVOH) for a range of peripheral arterial applications.Materials and MethodsSix academic medical centers entered retrospective data on 46 consecutive patients (27 men, 19 women; ages, 11–94 y; mean age, 50.3 y) who underwent 60 balloon-assisted EVOH procedures. The cohort was restricted to procedures involving peripheral, nonneural arteries 1–5.5 mm in diameter. Clinical indications included a wide range of vascular pathologic conditions (most commonly arteriovenous malformations [n = 20], renal angiomyolipomas [n = 8], and acute hemorrhage [n = 9]) and targeted visceral and musculoskeletal peripheral arteries. Data collected included sex, age, clinical indication, arterial pathology, arteries embolized, type of occlusion balloon microcatheter, type and concentration of EVOH agent, effectiveness as an embolic backstop, vessels protected, adequacy of EVOH cast penetration, catheter extraction, nontarget embolization, and complications.ResultsBalloon occlusion prevented EVOH reflux in 59 of 60 procedures (98.3%). Nontarget EVOH embolization occurred in 2 procedures (3.3%). Adequate EVOH cast penetration and complete filling of the target pathologic structure were seen in 57 of 60 procedures (95%). Balloon deflation and uneventful extraction occurred in all procedures; small EVOH fragments detached into target arteries in 2 cases. One major (1.7%) and 2 minor (3.3%) complications occurred.ConclusionsBalloon-assisted EVOH embolization of peripheral arteries is feasible, safe, effective, and versatile. The primary advantage of balloon-assisted EVOH embolization is the ability to apply more injection pressure to advance the EVOH cast assertively into the pathologic structure(s).     

Prostatic Artery Embolization—Anatomic Predictors of Technical Outcomes

PurposeTo determine if cone-beam CT and digital subtraction angiography analysis of pelvic arterial anatomy has predictive value for radiation exposure and technical success of prostatic artery embolization (PAE).Materials and MethodsThis prospective, nonrandomized, single-center study included 104 consecutive patients with lower urinary tract symptoms secondary to benign prostatic hyperplasia. Cone-beam CT was performed in 160/208 (76.9%) hemipelves to determine prostatic artery (PA) origin. Classification of pelvic arterial tortuosity was possible in 73/104 (70.2%) patients. Learning curves of 2 interventionalists who performed 86.5% of PAEs were analyzed.ResultsTortuosity of pelvic arteries was classified as mild in 25 (34.2%) patients median age 64 years, moderate in 40 (54.8%) patients median age 69 years, and severe in 8 (11.0%) patients median age 70 years (mild vs moderate, P = .002; mild vs severe, P = .019); median fluoroscopy times were 24, 36, and 46 minutes (P = .008, P = .023); median contrast volumes were 105, 122.5, and 142 mL (P = .029, P = .064); and bilateral PAE rates were 84.0%, 77.5%, and 62.5% (P = .437), respectively. PA origin from superior vesical artery was most frequent (27.5%) and showed higher dose area product (median 402.4 vs 218 Gy ∙ cm², P = .033) and fluoroscopy time (median 42.5 vs 27 min, P = .01) compared with PA origin from obturator artery, which was least frequent. Interventionalist experience revealed significant impact on procedure times (median 159 vs 130 min, P = .006).ConclusionsTortuosity of pelvic arteries was more frequent in older patients and predicted worse technical outcomes of PAE. PA origin from obturator artery was associated with lower dose area product and fluoroscopy time, especially compared with PA origin from superior vesical artery. Interventionalist experience showed significant influence on technical outcome.     

Effect of Day Optimizing Throughput (Dot) Knee Software Implementation on Magnetic Resonance Imaging Workflow Efficiency

PurposeAttempts by magnetic resonance (MR) manufacturers to help imaging centres improve patient throughput has led to the development of more automated acquisition. This software is capable of customizing individual scan alignment; potentially improving imaging efficiency and standardizing protocols. However, substantial investments are required to introduce such systems, potentially deterring their widespread application. This study assessed the implementation costs and reduction in examination durations for automated knee MR imaging (MRI) software.Materials and MethodsResearch activities were performed at a community-based academic centre on a 3-Tesla (3-T) system using Siemens' Day Optimizing Throughput (Dot) knee software. Examination acquisition times were extracted from the system before and after software implementation. Fiscal year 2012/13 finances were used to determine the average hourly cost of MRI utilization. Costs associated with automated software implementation were also calculated. Finally, the number of knee scans required to achieve a positive return on investment using the software was established.Results and DiscussionThe mean (standard deviation, sample size) pre- and post-Dot software scan times were 23.20 (4.18, n = 266) and 21.94 (4.51, n = 59) minutes, respectively, for a routine knee scan and 11.88 (1.60, n = 74) and 11.24 (1.51, n = 27) minutes, respectively, for a fast knee scan. The overall weighted average resulted in a 64-second time savings per automated knee examination. This negligible time savings would be extremely difficult to make use of clinically. Dot simplified 29 unique knee protocols to two, improving the consistency of knee examinations. Current Dot software is not compatible with all patients and therefore has limitations that are a concern among MR technologists.ConclusionAdoption of automated knee systems could assist in standardizing protocols; however, the cost of implementation and difficulty in modifying patient scheduling to reflect the minimal time savings would make a financial return unlikely to occur at small- and medium-sized institutions.     

Building and Exploitation of Learning Curves to Train Radiographer Students in X-Ray CT Image Postprocessing

IntroductionThis study aims to construct learning curves related to the realization of standardized postprocessing by radiographer students and to discuss their exploitation and interest.Materials and MethodsThis study was carried out in 21 French students in their 3rd year of training. Two postprocessing protocols in CT (#1 traumatic shoulder; #2 petrous bone) were repeated 15 times by each student. Each achievement was timed to obtain overall learning curves. The realization accuracy was also assessed for each student at each repetition.ResultsThe learning rates for the two protocols are 63% and 56%, respectively. The number of repetitions to reach the reference time for each protocol is 11 and 12, respectively. In both protocols, the standard deviations are significantly reduced and stabilized during repetitions. The mean accuracy progresses more quickly in protocol #1.DiscussionThe measured learning rates reflect a rapid learning process for each protocol. The analysis of the standard deviations shows that students have reached a homogeneous level. The average times and accuracies measured during the last repetitions show that the group has reached a high level of performance. Building learning curves helps students measure their progress and motivates them.ConclusionObtaining learning curves allows trainers/supervisors to qualify the learning difficulty of a task while motivating students/radiographers. The use of learning curves is inline with the competency-based training paradigm.     

H型高血压患者舌面诊图像颜色特征参数分析＊

目的 分析H型高血压患者的舌面诊图像颜色参数特征，探讨H型高血压患者的舌诊、面诊变化规律。方法 运用上海中医药大学自行研制的Smart TCM-1型中医舌面一体仪，采集高血压患者舌面诊图像，提取特征参数，分析健康对照组、H型高血压组与非H型高血压组患者舌面颜色参数特征。结果 ①在舌色各项参数中，H型高血压组舌尖部R值、B值、V值均显著小于健康对照组（P < 0.01）；非H型高血压组舌尖部B值显著小于健康对照组（P < 0.01），S值较健康对照组显著增大（P < 0.05）；H型高血压组舌尖部R、V值均明显小于非H型高血压组（P < 0.05）。在舌苔各项参数中，H型高血压组舌中H值、V值均明显小于健康对照组（P < 0.05）；非H型高血压组舌中V值、舌右V值均显著小于健康对照组（P < 0.01）；H型高血压组舌中H值明显小于非H型高血压组（P < 0.05），右侧舌苔S值明显大于非H型高血压组（P < 0.05）。②H型高血压组面色参数鼻G值、下颌G值、口唇R值、口唇V值均明显小于健康对照组（P < 0.05）；非H型高血压组前额H值、目眶H值、脸颊H值、鼻H值、下颌H值、整体H值均明显大于健康对照组（P < 0.05）；H型高血压组前额H值、目眶G值、目眶H值、脸颊H值、鼻G值、鼻H值、下颌R值、下颌G值、下颌H值、下颌V值、口唇R值、口唇G值、口唇V值、整体R值、整体G值、整体H值、整体V值均明显小于非H型高血压组（P < 0.05）。结论 H型高血压患者苔色偏黄，以舌中部为主，且舌右侧黄苔积聚较明显；H型高血压患者面色为黄中带红，口唇、下颌部更为晦暗。H型高血压患者的舌、面诊特征参数的变化，与高血压病阳亢湿盛病机相符。     

Free Water Loss–induced Heterogeneous Residual Strain and Reduced Fatigue Resistance in Root Dentin: A 3-dimensional Digital Image Correlation Analysis

IntroductionThis study evaluated free water loss–induced residual strain with and without axial compressive loading and assessed the mechanical effect of cyclic loading in fully hydrated and partially dehydrated root dentin.MethodsRoot dentin sections prepared from freshly extracted human premolars were used. Customized 3-dimensional digital image correlation was used to qualitatively and quantitatively analyze the residual strain induced by 2 hours of free water loss in different regions of root dentin. Residual strain in partially dehydrated root dentin during axial compressive loading was also analyzed using 3-dimensional digital image correlation. The effect of cyclic loading on load to fracture in fully hydrated and partially dehydrated dentin and their fractography were analyzed using micro–computed tomographic imaging.ResultsFree water loss resulted in a heterogeneous distribution of residual strain and an overall formation of residual compressive strain with areas of tensile strain localized to the root canal and outer dentin. More residual compressive strain was observed in the apical dentin compared with the cervical dentin (P < .05), and more residual shear strain was observed in outer dentin compared with inner dentin (P < .05). Axial loading resulted in an increase in the load-induced compressive strain in the direction perpendicular to dentinal tubules (P < .05). Fully hydrated roots displayed a higher mean (P < .05) and median (P < .05) number of cycles to fracture with microcracks characteristic of toughness.ConclusionsAfter free water loss, root dentin displayed an increased formation of heterogenous residual strain, which resulted in increased axial compressive load-induced strain and a decreased resistance to fatigue failure. The effect of free water loss in the loss of mechanical integrity of root-filled teeth needs further investigation.