Integrating in vitro testing and physiologically-based pharmacokinetic (PBPK) modelling for chemical liver toxicity assessment—A case study of troglitazone

In vitro to in vivo extrapolation (IVIVE) for next-generation risk assessment (NGRA) of chemicals requires computational modeling and faces unique challenges. Using mitochondria-related toxicity data of troglitazone (TGZ), a prototype drug known for liver toxicity, from HepaRG, HepG2, HC-04, and primary human hepatocytes, we explored inherent uncertainties in IVIVE, including cell models, cellular response endpoints, and dose metrics. A human population physiologically-based pharmacokinetic (PBPK) model for TGZ was developed to predict in vivo doses from in vitro point-of-departure (POD) concentrations. Compared to the 200–800 mg/d dose range of TGZ where liver injury was observed clinically, the predicted POD doses for the mean and top one percentile of the PBPK population were 28–372 and 15–178 mg/d respectively based on C_max dosimetry, and 185–2552 and 83–1010 mg/d respectively based on AUC. In conclusion, although with many uncertainties, integrating in vitro assays and PBPK modeling is promising in informing liver toxicity-inducing TGZ doses.     

Cardiac-type total anomalous pulmonary venous return is not benign

ObjectiveThe objective of this study was to investigate the association between morphological variation and postsurgical pulmonary vein (PV) stenosis (PPVS) in patients with cardiac total anomalous pulmonary venous connection (TAPVC).MethodsThis single-center, retrospective study included 168 pediatric patients who underwent surgical repair of cardiac TAPVC from 2013 to 2019 (connection to the coronary sinus [CS], n = 136; connection directly to the right atrium [RA], n = 32). Three-dimensional computed tomography modeling and geometric analysis were performed to investigate the morphological features; their relevance to the PPVS was examined.ResultsThe connection type had no association with PPVS (CS type: 18% vs right atrial type: 19%; P = .89) but there was a higher incidence of PPVS in patients with a single PV orifice than > 1 orifice (P < .001). Confluence-to-total PV area ratio (hazard ratio, 4.78, 95% CI, 1.86-12.32; P = .001) and length of drainage route (hazard ratio, 1.22; 95% CI, 1.14-1.31; P < .001) had a 4- and 1-fold increase in the risk for PPVS in the CS type after adjustment for age and preoperative pulmonary venous obstruction. In the right atrial type, those with anomalous PV return to the RA roof were more likely to develop PPVS than to the posterior wall of the RA (P < .001).ConclusionsThe number of inter-junction PV orifice correlated with PPVS development in cardiac TAPVC. The confluence-to-total PV ratio, length of drainage route, and anomalous PV return to the RA roof are important predictors for PPVS. Morphological subcategorization in this clinical setting can potentially assist in surgical decision-making.     

Challenges with Forecasting Budget Impact: A Case Study of Six ICER Reports

Background

Payers frequently rely on budget impact model (BIM) results to help determine drug coverage policy and its effect on their bottom line. It is unclear whether BIMs typically overestimate or underestimate real-world budget impact.

Temperature-controlled power modulation compensates for heterogeneous nanoparticle distributions: a computational optimization analysis for magnetic hyperthermia

Purpose: To study, with computational models, the utility of power modulation to reduce tissue temperature heterogeneity for variable nanoparticle distributions in magnetic nanoparticle hyperthermia.

Methods: Tumour and surrounding tissue were modeled by elliptical two- and three-dimensional computational phantoms having six different nanoparticle distributions. Nanoparticles were modeled as point heat sources having amplitude-dependent loss power. The total number of nanoparticles was fixed, and their spatial distribution and heat output were varied. Heat transfer was computed by solving the Pennes’ bioheat equation using finite element methods (FEM) with temperature-dependent blood perfusion. Local temperature was regulated using a proportional-integral-derivative (PID) controller. Tissue temperature, thermal dose and tissue damage were calculated. The required minimum thermal dose delivered to the tumor was kept constant, and heating power was adjusted for comparison of both the heating methods.

Results: Modulated power heating produced lower and more homogeneous temperature distributions than did constant power heating for all studied nanoparticle distributions. For a concentrated nanoparticle distribution, located off-center within the tumor, the maximum temperatures inside the tumor were 16% lower for modulated power heating when compared to constant power heating. This resulted in less damage to surrounding normal tissue. Modulated power heating reached target thermal doses up to nine-fold more rapidly when compared to constant power heating.

Conclusions: Controlling the temperature at the tumor-healthy tissue boundary by modulating the heating power of magnetic nanoparticles demonstrably compensates for a variable nanoparticle distribution to deliver effective treatment.     

Derivation of internal dose-based thresholds of toxicological concern for occupational inhalation exposure to systemically acting organic chemicals

This study aimed at deriving occupational thresholds of toxicological concern for inhalation exposure to systemically-acting organic chemicals using predicted internal doses. The latter were also used to evaluate the quantitative relationship between occupational exposure limit and internal dose. Three internal dose measures were identified for investigation: (i) the daily area under the venous blood concentration vs. time curve, (ii) the daily rate of the amount of parent chemical metabolized, and (iii) the maximum venous blood concentration at the end of an 8-hr work shift. A dataset of 276 organic chemicals with 8-hr threshold limit values-time-weighted average was compiled along with their molecular structure and Cramer classes (Class I: low toxicity, Class II: intermediate toxicity, Class III: suggestive of significant toxicity). Using a human physiologically-based pharmacokinetic model, the three identified dose metrics were predicted for an 8-hr occupational inhalation exposure to the threshold limit value for each chemical. Distributional analyses of the predicted dose metrics were performed to identify the percentile values corresponding to the occupational thresholds of toxicological concern. Also, simple linear regression analyses were performed to evaluate the relationship between the 8-hr threshold limit value and each of the predicted dose metrics, respectively. No threshold of toxicological concern could be derived for class II due to few chemicals. Based on the daily rate of the amount of parent chemical metabolized, the proposed internal dose-based occupational thresholds of toxicological concern were 5.61?×?10^?2 and 9?×?10^?4 mmol/d at the 10th percentile level for classes I and III, respectively, while they were 4.55?×?10^?1 and 8.5?×?10^?3 mmol/d at the 25th percentile level. Even though high and significant correlations were observed between the 8-hr threshold limit values and the predicted dose metrics, the one with the rate of the amount of chemical metabolized was remarkable regardless of the Cramer class (r² = 0.81; n = 276). The proposed internal dose-based occupational thresholds of toxicological concern are potentially useful for screening-level assessments as well as prioritization within an integrated occupational risk assessment framework.     

Computer-aided design of dry powder inhalers using computational fluid dynamics to assess performance

Dry powder inhalers (DPIs) are gaining popularity for the delivery of drugs. A cost effective and efficient delivery device is necessary. Developing new DPIs by modifying an existing device may be the simplest way to improve the performance of the devices. The aim of this research was to produce a new DPIs using computational fluid dynamics (CFD). The new DPIs took advantages of the Cyclohaler® and the Rotahaler®. We chose a combination of the capsule chamber of the Cyclohaler® and the mouthpiece and grid of the Rotahaler®. Computer-aided design models of the devices were created and evaluated using CFD. Prototype models were created and tested with the DPI dispersion experiments. The proposed model 3 device had a high turbulence with a good degree of deagglomeration in the CFD and the experiment data. The %fine particle fraction (FPF) was around 50% at 60?L/min. The mass median aerodynamic diameter was around 2.8–4?μm. The FPF were strongly correlated to the CFD-predicted turbulence and the mechanical impaction parameters. The drug retention in the capsule was only 5–7%. In summary, a simple modification of the Cyclohaler® and Rotahaler® could produce a better performing inhaler using the CFD-assisted design.     

Pathways in the association between sugar sweetened beverages and child asthma traits in the 2nd year of life: Findings from the BRISA cohort

Studies on the exposure of children to sugar-sweetened beverages (SSBs) at an early age may contribute to better understand the common causes and the temporal order of the relationships between obesity and asthma in early childhood. The objective of this study was to estimate the association between SSB and child asthma traits in the 2nd year of life, modeling direct and indirect pathways mediated by the highest BMI-z of the child and allergic inflammation. Data from the BRISA cohort, São Luís-MA, Brazil (n = 1140), were obtained from the baseline and from the follow-up performed at the 2nd year of life. The main explanatory variable was the calories from added sugars in SSBs as a percentage of the total daily energy intake. The outcome child asthma traits was a latent variable deduced from four indicators: medical diagnosis of asthma, wheezing, emergency visit due to intense wheezing, and medical diagnosis of rhinitis. A high percentage of daily calories from sugars added to SSBs was directly associated with higher values of child asthma traits (standardized coefficient (SC = 0.073; P = .030)). High levels of eosinophils were also directly associated with child asthma traits (SC = 0.118; P = .049). No mediation pathways were observed via greater BMI-z or eosinophil counts. Therefore, early exposure of children to SSB may contribute to increased risk of childhood asthma, preceding the link between sugar consumption and overweight/obesity, not yet evident in children in the first 2 years of life.     

Kinetic modeling of PET-FDG in the brain without blood sampling

The aim in this work is to report a new method to calculate parametric images from a single scan acquisition with positron emission tomography (PET) and fluorodeoxyglucose (FDG) in the human brain without blood sampling. It is usually practical for research or clinical purposes to inject the patient in an isolated room and to start the PET acquisition only for some 10–20 min, about 30 min after FDG injection. In order to calculate the cerebral metabolic rates for glucose (CMRG), usually several blood samples are required. The proposed method considers the relation between the uptake of the tracer in the cerebellum as a reference tissue and the population based input curve. Similar results were obtained for CMRG values with the present method in comparison to the usual autoradiographic and the non-linear least squares fitting of regions of interest.     

Development of the New Lung Allocation System in the United States

This article reviews the development of the new U.S. lung allocation system that took effect in spring 2005. In 1998, the Health Resources and Services Administration of the U.S. Department of Health and Human Services published the Organ Procurement and Transplantation Network (OPTN) Final Rule. Under the rule, which became effective in 2000, the OPTN had to demonstrate that existing allocation policies met certain conditions or change the policies to meet a range of criteria, including broader geographic sharing of organs, reducing the use of waiting time as an allocation criterion and creating equitable organ allocation systems using objective medical criteria and medical urgency to allocate donor organs for transplant. This mandate resulted in reviews of all organ allocation policies, and led to the creation of the Lung Allocation Subcommittee of the OPTN Thoracic Organ Transplantation Committee. This paper reviews the deliberations of the Subcommittee in identifying priorities for a new lung allocation system, the analyses undertaken by the OPTN and the Scientific Registry for Transplant Recipients and the evolution of a new lung allocation system that ranks candidates for lungs based on a Lung Allocation Score, incorporating waiting list and posttransplant survival probabilities.