Surface‐functionalized multiwall carbon nanotubes (MWCNTs) are incorporated in poly(methyl methacrylate)/styrene acrylonitrile (PMMA/SAN) blends and the pretransitional regime is monitored in situ by melt rheology and dielectric spectroscopy. As the blends exhibit weak dynamic asymmetry, the obvious transitions in the melt rheology due to thermal concentration fluctuations are weak. This is further supported by the weak temperature dependence of the correlation length (ξ ≈ 10–12 Å) in the vicinity of demixing. Hence, various rheological techniques in both the temperature and frequency domains are adopted to evaluate the demixing temperature. The spinodal decomposition temperature is manifested in an increase in the miscibility gap in the presence of MWCNTs. Furthermore, MWCNTs lead to a significant slowdown of the segmental dynamics in the blends. Thermally induced phase separation in the PMMA/SAN blends lead to selective localization of MWCNTs in the PMMA phase. This further manifests itself in a significant increase in the melt conductivity.
Recently, applications for lithium-ion batteries (LIBs) have expanded to include electric vehicles and electric energy storage systems, extending beyond power sources for portable electronic devices. The power sources of these flexible electronic devices require the creation of thin, light, and flexible power supply devices such as flexile electrolytes/insulators, electrode materials, current collectors, and batteries that play an important role in packaging. Demand will require the progress of modern electrode materials with high capacity, rate capability, cycle stability, electrical conductivity, and mechanical flexibility for the time to come. The integration of high electrical conductivity and flexible buckypaper (oxidized Multi-walled carbon nanotubes (MWCNTs) film) and high theoretical capacity silicon materials are effective for obtaining superior high-energy-density and flexible electrode materials. Therefore, this study focuses on improving the high-capacity, capability-cycling stability of the thin-film Si buckypaper free-standing electrodes for lightweight and flexible energy-supply devices. First, buckypaper (oxidized MWCNTs) was prepared by assembling a free stand-alone electrode, and electrical conductivity tests confirmed that the buckypaper has sufficient electrical conductivity (10−4(S m−1) in LIBs) to operate simultaneously with a current collector. Subsequently, silicon was deposited on the buckypaper via magnetron sputtering. Next, the thin-film Si buckypaper freestanding electrodes were heat-treated at 600 °C in a vacuum, which improved their electrochemical performance significantly. Electrochemical results demonstrated that the electrode capacity can be increased by 27/26 and 95/93 μAh in unheated and heated buckypaper current collectors, respectively. The measured discharge/charge capacities of the USi_HBP electrode were 108/106 μAh after 100 cycles, corresponding to a Coulombic efficiency of 98.1%, whereas the HSi_HBP electrode indicated a discharge/charge capacity of 193/192 μAh at the 100th cycle, corresponding to a capacity retention of 99.5%. In particular, the HSi_HBP electrode can decrease the capacity by less than 1.5% compared with the value of the first cycle after 100 cycles, demonstrating excellent electrochemical stability. 相似文献
A novel electrochemical sol–gel imprinted sensor for sensitive and convenient determination of thymidine was developed. Thin film of molecularly imprinted sol–gel polymers with specific binding sites for thymidine was cast on carbon electrode by electrochemical deposition. Multi-walled carbon nanotubes (MWCNTs) were introduced for the enhancement of electronic transmission and sensitivity. The morphology and performance of the imprinted film was characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), differential pulse voltammetry (DPV) and amperometric measurements (i–t) in detail. The results showed that the imprinted film exhibited high selectivity toward thymidine. The linear range is over the range from 2 to 22 μmol L−1, and the linear regression equation for thymidine is I= 0.867C + 0.232 with the detection limit of 1.6 × 10−9 mol L−1(S/N = 3). The imprinted sensor was successfully employed to detect thymidine in some zidovudine-tablet samples. 相似文献
A vast variety of nanomaterials have been developed in the recent years, being carbon nanotubes (CNTs) the ones that have attracted more attention, due to its unique properties which make them suitable for numerous applications. Consequently, it is predicted that tons of CNTs will be produced worldwide every year, being its exposure of toxicological concern. Nanomaterials, once into the body, can translocate from the uptake sites to the blood circulation or the lymphatic system, resulting in distribution throughout the body. Thus, the vascular endothelium can be in contact with them and can suffer from their toxic effects. In this regard, the aim of this work was to investigate the cytotoxicity of single-walled carbon nanotubes (SWCNTs) on human endothelial cells evaluating the influence of acid carboxylic functionalization and also the exposure time (24 and 48 h). Biomarkers assessed were neutral red uptake, protein content, a tetrazolium salt metabolization and cell viability by means of the Trypan blue exclusion test. Cells were exposed to concentrations between 0 and 800 μg/mL SWCNTs for 24 and 48 h. Results have shown that both SWCNTs and carboxylic acid functionalized single-walled carbon nanotubes (COOH-SWCNTs) induce toxic effects in HUVEC cells in a concentration- and time-dependent way. Moreover, the carboxylic acid functionalization results in a higher toxicity compared to the SWCNTs. 相似文献
Biological responses of multi-wall carbon nanotubes (MWCNTs) were assessed after a single intratracheal instillation in rats. The diameter and median length of the MWCNTs used in this study were approximately 60 nm and 1.5 μm, respectively. Groups of male Sprague–Dawley rats were intratracheally instilled with 0.04, 0.2, or 1 mg/kg of the individually dispersed MWCNT suspension. After instillation, the bronchoalveolar lavage fluid was assessed for inflammatory cells and markers, and the lung, liver, kidney, spleen, and cerebrum were histopathologically evaluated at 3-day, 1-week, 1-month, 3-month, and 6-month post-exposure. Transient pulmonary inflammatory responses were observed only in the lungs of the group of rats exposed to 1 mg/kg of MWCNTs. Morphology of the instilled MWCNTs in the lungs of rats was assessed using light microscopy and transmission electron microscopy (TEM). Light microscopy examination revealed that MWCNTs deposited in the lungs of the rats were typically phagocytosed by the alveolar macrophages and these macrophages were consequently accumulated in the alveoli until 6-month post-exposure. The 400 TEM images obtained showed that all MWCNTs were located in the alveolar macrophages or macrophages in the interstitial tissues, and MWCNTs were not located in the cells of the interstitial tissues. There was no evidence of chronic inflammation, such as angiogenesis or fibrosis, induced by MWCNT instillation. These results suggest that MWCNTs were being processed and cleared by alveolar macrophages. 相似文献
Introduction: As a part of increasing interest in nanobiotechnology, nanoparticle-based drug discovery as well as development and drug delivery constitute an important area in nanomedicine, and it is also driven by search for new drugs by the pharmaceutical industry. Nanomaterials for pharmaceutical application include carbon nanotubes (CNTs). Areas covered: This article describes the properties of CNTs, both single-walled CNTs (SWCNTs) and multiwalled CNTs (MWCNTs) with relevance to drug discovery and development. Pharmacokinetics of CNTs as well as CNT-based drug delivery is discussed. The article also looks at how the scope for pharmaceutical applications of CNTs is broadened by conjugation with other molecules and presents the potential therapeutic applications. Finally, the toxicology of CNTs is considered with measures under investigation for reducing it. Literature on CNTs, from the past 5 years, was reviewed and selected publications relevant to drug discovery, development, and delivery were included in the bibliography. Expert opinion: Carbon nanotubes combine more properties relevant to drug development and delivery than any other nanomaterial. Although a tremendous amount of basic research has been done on CNTs during the past decade, little of this is nearing translation into human applications. No CNT-based medicine has reached clinical trials. Nevertheless, CNT conjugation with other molecules has extended the horizons for their potential therapeutic applications. The most promising of these is PEGylation, which extends the survival of CNTs in circulation. Potential future applications of CNTs include combination of diagnostics and therapeutic drug delivery as well as a component of multimodal therapies for tissue regeneration. 相似文献
The health risks of inhalation exposure to engineered nanomaterials in the workplace are a major concern in recent years, and hazard assessments of these materials are being conducted. The pulmonary surfactant of lung alveoli is the first biological entity to have contact with airborne nanomaterials in inhaled air. In this study, we retrospectively evaluated the pulmonary surfactant components of rat lungs after a 4-week inhalation exposure to three different nanomaterials: fullerenes, nickel oxide (NiO) nanoparticles and multi-walled carbon nanotubes (MWCNT), with similar levels of average aerosol concentration (0.13–0.37?mg/m3). Bronchoalveolar lavage fluid (BALF) of the rat lungs stored after previous inhalation studies was analyzed, focusing on total protein and the surfactant components, such as phospholipids and surfactant-specific SP-D (surfactant protein D) and the BALF surface tension, which is affected by SP-B and SP-C. Compared with a control group, significant changes in the BALF surface tension and the concentrations of phospholipids, total protein and SP-D were observed in rats exposed to NiO nanoparticles, but not in those exposed to fullerenes. Surface tension and the levels of surfactant phospholipids and proteins were also significantly different in rats exposed to MWCNTs. The concentrations of phospholipids, total protein and SP-D and BALF surface tension were correlated significantly with the polymorphonuclear neutrophil counts in the BALF. These results suggest that pulmonary surfactant components can be used as measures of lung inflammation. 相似文献
Human beings and ecosystems are being possibly exposed to CNTs, as there is a rise in global production rate of carbon nanotubes (CNTs). This may affect the health of humans and increases the environmental risk. We have already reported the pulmonary toxicity due to the inhalation of MWCNTs. We claim that a compound with anti-inflammatory and antioxidant activity may ameliorate the CNT-induced toxic effect. With this view, we have investigated the ameliorative effect of intravenously-administered nano bis-demethoxy curcumin analog (NBDMCA) against MWCNTs-induced inhalation toxicity by examining the lung histopathology for inflammatory cell dynamics, pulmonary remodeling and estimating the inflammatory biomarkers in the broncho-alveolar lavage fluid. We observed that NBDMCA could ameliorate the injury as evidenced by the decline in the levels of markers of inflammation, cell damage, and the histopathological changes induced by MWCNTs. We conclude that NBDMCA may be used to reduce the risk of MWCNTs-induced inhalation toxicity. 相似文献