Building and Exploitation of Learning Curves to Train Radiographer Students in X-Ray CT Image Postprocessing

IntroductionThis study aims to construct learning curves related to the realization of standardized postprocessing by radiographer students and to discuss their exploitation and interest.Materials and MethodsThis study was carried out in 21 French students in their 3rd year of training. Two postprocessing protocols in CT (#1 traumatic shoulder; #2 petrous bone) were repeated 15 times by each student. Each achievement was timed to obtain overall learning curves. The realization accuracy was also assessed for each student at each repetition.ResultsThe learning rates for the two protocols are 63% and 56%, respectively. The number of repetitions to reach the reference time for each protocol is 11 and 12, respectively. In both protocols, the standard deviations are significantly reduced and stabilized during repetitions. The mean accuracy progresses more quickly in protocol #1.DiscussionThe measured learning rates reflect a rapid learning process for each protocol. The analysis of the standard deviations shows that students have reached a homogeneous level. The average times and accuracies measured during the last repetitions show that the group has reached a high level of performance. Building learning curves helps students measure their progress and motivates them.ConclusionObtaining learning curves allows trainers/supervisors to qualify the learning difficulty of a task while motivating students/radiographers. The use of learning curves is inline with the competency-based training paradigm.     

薄层扫描法测定复脉定冲剂中远志有效成分的含量

采用薄层扫描法对复脉定冲剂中远志有效成分３，４，５－三甲氧基反式肉桂酸乙酯的含量进行测定。方法简单、快速，结果可靠，可作为该制剂的质控标准。     

Three-dimensional recording of the human face with a 3D laser scanner.

Three-dimensional recording of the surface of the human body or of certain anatomical areas has gained an ever increasing importance in recent years. When recording living surfaces, such as the human face, not only has a varying degree of surface complexity to be accounted for, but also a variety of other factors, such as motion artefacts. It is of importance to establish standards for the recording procedure, which will optimise results and allow for better comparison and validation. In the study presented here, the faces of five male test persons were scanned in different experimental settings using non-contact 3D digitisers, type Minolta Vivid 910). Among others, the influence of the number of scanners used, the angle of recording, the head position of the test person, the impact of the examiner and of examination time on accuracy and precision of the virtual face models generated from the scanner data with specialised software were investigated. Computed data derived from the virtual models were compared to corresponding reference measurements carried out manually between defined landmarks on the test persons' faces. We describe experimental conditions that were of benefit in optimising the quality of scanner recording and the reliability of three-dimensional surface imaging. However, almost 50% of distances between landmarks derived from the virtual models deviated more than 2mm from the reference of manual measurements on the volunteers' faces.     

Techniques in facial identification: Computer-aided facial reconstruction using a laser scanner and video superimposition

A facial image was reconstructed from the skull, part of a complete skeleton found in woodland, of a male person who had hanged himself from a tree. In addition, video superimposition was carried out with antemortem photographs of a person suspected of being the victim, and a good match was obtained. In a further case, a cheaper video-transparency superimposition was carried out, with identity later being confirmed on the basis of dental records. The techniques and the problems encountered are discussed. According to our experience, 3D computer reconstruction and video superimposition have a useful role in the process of identification, particularly in the early stages of an investigation and when other more definitive methods may not be available.     

人工培植牛黄中主要成分的薄层色谱扫描法

天然牛黄为名贵中药材,但货源紧缺供不应求,为此拟利用人工培植方法获得天然牛黄以利扩大药源。本文对十七个人工培植牛黄主成分进行定量分析,并与天然牛黄及人工合成牛黄作对比,从成分上探讨了人工培植牛黄的质量。     

Improvement of brain single photon emission tomography (SPET) using transmission data acquisition in a four-head SPET scanner

Attenuation coefficient maps (-maps) are a useful way to compensate for non-uniform attenuation when performing single photon emission tomography (SPET). A new method was developed to record single photon transmission data and a-map for the brain was produced using a four-head SPET scanner. Transmission data were acquired by a gamma camera opposite to a flood radioactive source attached to one of four gamma cameras in the four-head SPET scanner. Attenuation correction was performed using the iterative expectation maximization algorithm and the-map. Phantom studies demonstrated that this method could reconstruct the distribution of radioactivity more accurately than conventional methods, even for a severely non-uniform-map, and could improve the quality of SPET images. Clinical application to technetium-99m hexamethylpropylene amine oxime (HMPAO) brain SPET also demonstrated the usefulness of this method. Thus, this method appears to be promising for improvement in the image quality and quantitative accuracy of brain SPET.This work was presented in part at the World Congress on Medical Physics and Biomedical Engineering, 7–12 July 1991, Kyoto, Japan     

两种磁共振血管成像序列对脑静脉畸形的比较影像学研究

目的探讨磁共振静脉血氧水平依赖成像（VEN-BOLD）和时间飞跃法血管成像（TOF-MRA）对静脉畸形（CVM）的诊断价值。方法采用1.5T超导磁共振扫描仪对我院收治的13例CVM患者进行TOF-MRA和VEN-BOLD对比成像分析。结果 TOF-MRA原始轴位图像可显示全部13例CVM的引流静脉,并可进行最大密度投影重建（MIP）3D图像观察,但仅6例原始图像可显示稀少的髓静脉;而VEN-BOLD可清晰显示全部13例CVM的引流静脉及更多的髓静脉。结论 TOF-MRA可对CVM的引流静脉进行3D直观显示;而VEN-BOLD可清晰准确地显示CVM的引流静脉及髓静脉,二者结合可作为CVM诊断必要的补充序列。     

Utility of cardiac CT in infants with congenital heart disease: Diagnostic performance and impact on management

BackgroundAdvances in cardiac CT (CCT) scanner technology allow imaging without anesthesia, and with low radiation dose, making it an attractive technique in infants with congenital heart disease. However, the utility of CCT using a dual-source scanner with respect to diagnostic performance and impact on management has not been systematically studied in this population.MethodsRetrospective review of infants who underwent CCT to determine the utility of CCT with respect to the following: answering the primary diagnostic question, providing new diagnostic information, prompting a change in management, and concordance with catheterization or surgical inspection.ResultsA total of 156 infants underwent 172 scans at a median age of 64 days, (IQR 4–188) from Jan 2016–Dec 2019. The most frequent diagnostic question was related to the pulmonary arteries (43%), followed by the aortic arch (30%), pulmonary veins (26%), coronary arteries (17%), patent ductus arteriosus (10%) and others (9%). A high-pitch spiral scan was frequently used (90%). The median effective radiation dose was low (0.66 ?mSv) and general anesthesia was used infrequently (23%). CCT answered the primary diagnostic question in 168/172 (98%) and added to the diagnostic information already available by echocardiography in 161/172 (96%) scans. CCT led to a change in management following 78/172 (53%) scans and had an impact on management following 167/172 (97%) scans. On follow-up, after 107/172 (62%) scans, subjects underwent cardiac surgery, and after 55/172 (32%) scans, they had cardiac catheterization. CCT findings were concordant with catheterization and/or surgical inspection in 156/159 (98%) scans.ConclusionsIn infants with complex congenital heart disease, CCT was accurate, answered the diagnostic questions in nearly all cases, and frequently added diagnostic information that impacted management. Radiation exposure was low, and anesthesia was needed infrequently.