Limited benefit of CT scans in tuberculosis contact tracing

ObjectiveThe detection of abnormal findings on computed tomography (CT) scans of tuberculosis contacts combined with normal plain radiographs contributes to the early detection of tuberculosis. However, the benefit of the early detection of abnormalities for the prevention of active tuberculosis during follow-up requires evaluation.MethodWe conducted retrospective comparison of the existence of CT scans of tuberculosis contacts without findings of active tuberculosis on plain radiographs at a hospital in Japan. Results: Among 243 contacts without CT scans, five developed tuberculosis during follow-up. Among 229 contacts with CT scans, 24 were judged as targets of multi-drug therapy since their CT findings were suggestive of active tuberculosis at the time of the CT screening. Among 205 contacts judged as having latent tuberculous infection with CT screening, three developed tuberculosis diseases during follow-up. Conclusion: CT scans detected abnormal findings among contacts without abnormalities of plain radiographs but there were some contacts that developed tuberculosis diseases among those with contact investigation including CT scan. The value of CT is equivocal considering the balance of true treatment, overtreatment and harm of radiation.     

Differentiating autoimmune pancreatitis from pancreatic ductal adenocarcinoma with CT radiomics features

PurposeThe purpose of this study was to determine whether computed tomography (CT)-based machine learning of radiomics features could help distinguish autoimmune pancreatitis (AIP) from pancreatic ductal adenocarcinoma (PDAC).Materials and MethodsEighty-nine patients with AIP (65 men, 24 women; mean age, 59.7 ± 13.9 [SD] years; range: 21–83 years) and 93 patients with PDAC (68 men, 25 women; mean age, 60.1 ± 12.3 [SD] years; range: 36–86 years) were retrospectively included. All patients had dedicated dual-phase pancreatic protocol CT between 2004 and 2018. Thin-slice images (0.75/0.5 mm thickness/increment) were compared with thick-slices images (3 or 5 mm thickness/increment). Pancreatic regions involved by PDAC or AIP (areas of enlargement, altered enhancement, effacement of pancreatic duct) as well as uninvolved parenchyma were segmented as three-dimensional volumes. Four hundred and thirty-one radiomics features were extracted and a random forest was used to distinguish AIP from PDAC. CT data of 60 AIP and 60 PDAC patients were used for training and those of 29 AIP and 33 PDAC independent patients were used for testing.ResultsThe pancreas was diffusely involved in 37 (37/89; 41.6%) patients with AIP and not diffusely in 52 (52/89; 58.4%) patients. Using machine learning, 95.2% (59/62; 95% confidence interval [CI]: 89.8–100%), 83.9% (52:67; 95% CI: 74.7–93.0%) and 77.4% (48/62; 95% CI: 67.0–87.8%) of the 62 test patients were correctly classified as either having PDAC or AIP with thin-slice venous phase, thin-slice arterial phase, and thick-slice venous phase CT, respectively. Three of the 29 patients with AIP (3/29; 10.3%) were incorrectly classified as having PDAC but all 33 patients with PDAC (33/33; 100%) were correctly classified with thin-slice venous phase with 89.7% sensitivity (26/29; 95% CI: 78.6–100%) and 100% specificity (33/33; 95% CI: 93–100%) for the diagnosis of AIP, 95.2% accuracy (59/62; 95% CI: 89.8–100%) and area under the curve of 0.975 (95% CI: 0.936–1.0).ConclusionsRadiomic features help differentiate AIP from PDAC with an overall accuracy of 95.2%.     

肝细胞癌TACE术后病灶存活或复发18F-FDGPET/CT和增强CT诊断价值Meta分析

目的采用Meta分析方法评价¹⁸F-脱氧葡萄糖正电子发射计算机体层摄影(¹⁸F-FDG PET/CT)和增强CT(CECT)诊断经导管肝动脉化疗栓塞术(TACE)术后存活或复发病灶的临床价值。方法根据PRISMA报告规范开展Meta分析。检索PubMed、Embase、Cochrane Library、Web of Science、中国知网、万方和维普数据库中¹⁸F-FDG PET/CT和CECT诊断TACE术后存活或复发病灶的临床研究,时间至2019-04。由2位研究人员独立筛选文献、提取资料,根据诊断准确性研究质量评价工具-2(QUADAS-2)评价纳入研究的偏倚风险后,采用Stata 12.0软件进行Meta分析,计算其汇总敏感度(Sen)和特异度(Spe),绘制受试者工作特征曲线(SROC)并计算曲线下面积(AUC)。结果共纳入10篇¹⁸F-FDG PET/CT及13篇CECT诊断TACE术后存活或复发病灶的原始研究,分别包括322例患者的467个病灶和748例患者的943个病灶。Meta分析显示,¹⁸F-FDG PET/CT诊断TACE术后存活或复发病灶的Sen=0.92(95%CI为0.87~0.94)、Spe=0.95(95%CI为0.82~0.99)、AUC=0.97(95%CI为0.93~0.99);CECT诊断TACE术后存活或复发病灶的Sen=0.72(95%CI为0.66~0.78)、Spe=0.99(95%CI为0.93~1.00)、AUC=0.87(95%CI为0.83~0.89)。此外,CECT诊断TACE术后存活或复发Sen(Z=2.34,P=0.02)和AUC(Z=2.21,P=0.03)值低于¹⁸F-FDG PET/CT,差异有统计学意义。结论相比于CECT,¹⁸F-FDG PET/CT对TACE术后存活或复发病灶具有较高诊断效能,可视为TACE术后存活或复发病灶有效的影像学诊断方法。     

Comparison between conventional CT and grayscale inversion CT images in the assessment of the post-operative spinal orthopaedic implants

AimTo compare the accuracy of the inverted greyscale CT versus the conventional CT in the assessment of post-operative spinal orthopaedic implants and osseous fusion.Methods50 patients who had CT as part of their routine spinal implant follow up were evaluated for the presence of fusion, fracture and loosening with conventional CT and with greyscale inverted CT images. 3 independent observers assessed the images 2 months apart. Diagnostic performance (sensitivity and specificity) of the conventional and greyscale inversion images relative to the reference standard were calculated. Agreement with the reference standard was assessed using Cohen's kappa for conventional and greyscale inversion images.ResultsCorrect classifications increased when using the greyscale inverted CT images for each reader compared to conventional CT images (40–46, 39 to 42 and 41 to 44 (out of 50)). Inverted images demonstrated better agreement with the reference standard than conventional grayscale images for assessment of fusion (kappa of 0.588 for inverted CT versus 0.484 for conventional CT) and loosening (kappa 0.386 for inverted versus 0.293 for conventional). Sensitivity was increased for assessment of fusion and loosening. McNemar's test performed for assessment of sensitivity differences showed statistical significance (p = 0.038 for fusion and p = 0.0313 for loosening).ConclusionGreyscale inversion CT is a useful adjunct which has advantages (improved sensitivity and better agreement) over conventional CT imaging in cases of fusion and loosening of metallic implants following spinal instrumentation. We recommend the use of both the greyscale inversion CT images and conventional CT imaging when assessing post-operative spinal orthopaedic implants.     

Manejo y seguimiento radiológico del paciente post-COVID-19

Most of the patients who overcome the SARS-CoV-2 infection do not present complications and do not require a specific follow-up, but a significant proportion (especially those with moderate / severe clinical forms of the disease) require clinicalradiological follow-up. Although there are hardly any references or clinical guidelines regarding the long-term follow-up of post-COVID-19 patients, radiological exams are being performed and monographic surveillance consultations are being set up in most of the hospitals to meet their needs. The purpose of this work is to share our experience in the management of the post-COVID-19 patient in two institutions thathave had a high incidence of COVID-19 and to propose general follow-uprecommendations from a clinical and radiological perspective.     

多层螺旋CT定量评估慢性阻塞性肺疾病病情的价值

目的探讨多层螺旋CT(MSCT)定量评估慢性阻塞性肺疾病病情的价值。方法选取2017年8月～2018年7月在湖州市第一人民医院就诊的73例慢性阻塞性肺疾病(COPD)患者作为研究对象,按照病情轻重分为Ⅰ组(轻度患者17例)、Ⅱ组(中度患者32例)、Ⅲ组(重度患者24例),并选取同期于该院体检的健康者20例为对照组。所有研究对象均行MSCT低剂量扫描,观察比较各组管腔面积(Ai)、支气管壁面积百分比(WA%)、管壁厚度与体表面积比值(T/BSA)、壁厚度与直径比值(TDR),同时予以肺功能检查,采用定量CT气道分析软件分别测量气道相关参数,并用Siemens Pulmo软件Pearson定量分析其相关性。结果对照组、Ⅰ组、Ⅱ组、Ⅲ组的FEV1均呈逐渐下降趋势,FEV1/FVC呈逐渐上升趋势,差异均有统计学意义(P0.05)。对照组、Ⅰ组、Ⅱ组、Ⅲ组的WA%、T/BSA、TDR比较,均呈逐渐上升趋势,Ai呈下降趋势,差异均有统计学意义(P0.05)。FEV1与WA%、TDR之间呈负相关(r=-0.291,P=0.000;r=-0.473,P=0.000),FEV1/FVC与WA%、TDR之间呈正相关(r=0.285,P=0.000;r=0.472,P=0.000)。结论 MSCT扫描及定量分析可为COPD患者气道病变情况提供可靠的评估信息。     

Analysis of radiation exposure data from common radiological procedures in Dutch hospitals

IntroductionIn the Netherlands, Diagnostic Reference Levels (DRLs) have not been based on a national survey as proposed by ICRP. Instead, local exposure data, expert judgment and the international scientific literature were used as sources. This study investigated whether the current DRLs are reasonable for Dutch radiological practice.MethodsA national project was set up, in which radiography students carried out dose measurements in hospitals supervised by medical physicists. The project ran from 2014 to 2017 and dose values were analysed for a trend over time. In the absence of such a trend, the joint yearly data sets were considered a single data set and were analysed together. In this way the national project mimicked a national survey.ResultsFor six out of eleven radiological procedures enough data was collected for further analysis. In the first step of the analysis no trend was found over time for any of these procedures. In the second step the joint analysis lead to suggestions for five new DRL values that are far below the current ones. The new DRLs are based on the 75 percentile values of the distributions of all dose data per procedure.ConclusionThe results show that the current DRLs are too high for five of the six procedures that have been analysed. For the other five procedures more data needs to be collected. Moreover, the mean weights of the patients are higher than expected. This introduces bias when these are not recorded and the mean weight is assumed to be 77 kg.Implications for practiceThe current checking of doses for compliance with the DRLs needs to be changed. Both the procedure (regarding weights) and the values of the DRLs should be updated.     

The management of emergency hospital visits for inflammatory bowel diseases: A French national expert consensus report

BackgroundManagement of inflammatory bowel diseases (IBD) in the emergency department is often suboptimal.AimsTo develop a national consensus checklist of indicators to facilitate decision-making in emergency departments concerning hospitalisation and referral for abdominopelvic computed tomography (CT).MethodsA Delphi survey was used to obtain consensus on a checklist of clinical and biological variables. 119 healthcare professionals experienced in treating IBD were invited to participate. Panellists were provided with a literature survey and invited to agree or disagree with items on a prototype checklist. Two successive rounds of voting were organised.ResultsThe prototype checklist included fifteen clinical or laboratory indicators for hospitalisation or CT. Four indicators were not retained in the Delphi process and four additional indicators added. The final indicators retained were: abdominal signs/symptoms of disease exacerbation, intravenous morphine titration, fever, vomiting, dehydration, recent intestinal surgery, ano-perineal abscess, bowel obstruction, haemodynamic instability, anaemia, acute kidney failure and elevated C-reactive protein. Consensus for the retained indicators was >88%.ConclusionsUse of this consensus checklist for the management of IBD in the emergency department may help improve standards of care and thus reduce the burden of these diseases.     

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.     

CT定位下经皮穿刺射频消融治疗肺肿瘤疗效分析

目的探讨CT引导下集束电极射频治疗肺恶性肿瘤的疗效。方法对1999年以来在cT定位引导下。采用WE7568集束电极射频肿瘤消融仪。用集束电极经皮穿刺到肺内肿瘤进行射频消融治疗，每针次温度75～95℃左右维持10min或15min．结果78例病人经CT引导行射频消融80例次，绝大多数病灶（77．4％）复查CT均有不同程度缩小或CT值下降30～37，疼痛等症状明显缓解。无严重并发症，无围手术期死亡。结论CT定位下经皮集束电极射频消融对肺恶性肿瘤的近期疗效明显，对晚期肺癌、多发性肺转移瘤及不能耐受手术者，可作为综合治疗的方法之一。