Noise characterization of “effective quiet” areas on a U.S. Navy aircraft carrier

The purpose of this investigation was to characterize noise levels in spaces designated as “effective quiet” areas on a U.S. Navy aircraft carrier. Noise dosimetry samples were collected in 15 designated spaces, representing 15 noise measurements, while at-sea during airwing carrier qualifications. Equivalent sound level (L_eq) measurements were collected during flight operations (L_{eq (flt ops)}), non-flight operations (L_{eq (non-flt ops)}), and over 24-hr periods (L_{eq (24-hr)}). These data were compared to the 70 dBA American Conference of Governmental Industrial Hygienists (ACGIH^®) Threshold Limit Value (TLV^®) for “effective quiet” areas intended for temporary threshold shift recovery when personnel live and work in a potentially noise hazardous environment for periods greater than 24?hr. The monitored areas were selected based on personnel occupancy/use during off-duty time periods. Areas were classified by either (1) leisure areas that included mess (eating areas), gyms, lounges, an internet cafe, and the fantail social area or (2) berthing (sleeping) areas. The L_eq measurements in decibels “A” weighted (dBA) were compared to determine significant differences between L_{eq (flt ops)}, L_{eq (non-flt ops)}, and L_{eq (24-hr)} and were compared between leisure area and berthing area. Measured noise levels according to time period ranged as follows: (1) L_{eq (24-hr)}: 70.8–105.4 dBA; (2) L_{eq (flt ops)}: 70–101.2 dBA; and (3) L_{eq (non-flt ops)}: 39.4–104.6 dBA. All area measurements over the 24-hr period and during flight operations and 46.7% of the areas during the non-flight operation time period exceeded the “effective quiet” 70 dBA ACGIH TLV. Mean L_eqs were 15 dBA higher during flight operations compared to non-flight operations in “effective quiet” areas (p?=?0.001). The L_eqs in leisure areas were significantly higher than berthing areas by approximately 21 dBA during non-flight operation periods (p?=?0.001). Results suggest noise levels in “effective quiet” areas frequented by aircraft carrier personnel during off-duty hours when at-sea may inhibit auditory recovery from occupational noise exposures that occur on-duty.     

Post-neoadjuvant strategies in breast cancer: From risk assessment to treatment escalation

The post-neoadjuvant setting in early breast cancer represents an attractive scenario for adjuvant clinical trials, offering the opportunity to test new drugs or combinations in high-risk patients who did not achieve pathologic complete response after primary treatment. No standard therapies are routinely proposed to patients with residual disease after neoadjuvant chemotherapy and few trials have explored this setting. To date, only one randomized phase III study showed the benefit of additional capecitabine after neoadjuvant chemotherapy, and international guidelines recommend at least to consider its use, particularly for triple negative breast cancer. Therefore, the management of these patients is still a clinical challenge, with limited data supporting the use of an additional adjuvant non-cross-resistant chemotherapy. Escalation strategies are currently under evaluation, with new agents proposed as supplementary post-neoadjuvant treatment (e.g. platinum salts, capecitabine, poly ADP-ribose polymerase inhibitors, immune checkpoint inhibitors, cyclin-dependent kinase 4/6 inhibitors). Based on these premises, selection criteria are critical to identify patients who may benefit from post-neoadjuvant therapies, through the validation of prognostic and predictive biomarkers for a reliable risk assessment and estimation of benefit.The present review summarizes the efforts in introducing new therapeutic options for patients with breast cancer and residual disease after neoadjuvant treatment, with a particular focus on the ongoing clinical trials and useful biomarkers for risk stratification.     

Factors influencing development of residual stresses during crystallization firing in a novel lithium silicate glass-ceramic

ObjectiveDevelopment of residual stresses is a potential source of premature fractures in glassy materials, being of special interest in novel lithium silicate glass-ceramics that require a crystallization firing to achieve their final mechanical properties. The aim of this work was to assess the influence of various firing tray systems and the application of different cooling protocols on the development of residual stresses in Suprinity PC crowns. Their effect on the in vitro lifetime of the restorations was also studied.MethodsThirty crowns were milled out of Suprinity PC blocks and crystallized using one of five different commercial firing tray systems (n = 6). Samples in each group were cooled following a fast (FC = 5.5 °C/s), a slow (SC = 0.4 °C/s) or the manufacturer’s reference cooling (REF ). Obtained crowns were sagittally or transversally sectioned and the magnitude and distribution of residual stresses was determined using the light birefringence method. Extra crowns of three of the subgroups (n = 8) were produced and submitted to chewing simulation for 10⁶ cycles or until fracture ensued.ResultsAverage residual stresses ranged between 0 and 1.5 MPa (peaks of 5 MPa). Highest stress magnitudes were observed at the support areas of groups using firing pins, leading to thermal cracks in FC samples and premature failures in the REF subgroup. The use of fibrous pads and firing pastes limited the development of residual stresses, whereas application of SC regimes extended the lifetime of the restorations.SignificanceDevelopment of residual stresses during crystallization firing in lithium silicate glass-ceramics results critical for their mechanical performance and should be therefore avoided by ensuring a homogenous cooling of the structures.     

牙冠延长术在残根残冠修复中的临床疗效

目的评价牙冠延长术在牙体缺损达龈下的残根残冠修复中的临床疗效。方法自2004年5月至2005年6月,对32例患者的36颗牙体缺损达龈下的患牙,术前按断端位于龈下最深距离分为A组(20颗患牙,距离<3.0mm)和B组(16颗患牙,3.0mm≤距离≤4.0mm),均采用牙冠延长术暴露龈下牙体断面,术后6周行桩冠修复。分别记录和比较手术前、后牙周探诊深度(PD)、菌斑指数(PLI)、龈沟出血指数(SBI)和牙齿松动度,以观察临床疗效。结果术后随访患者6个月,两组病例术后6周牙体断端均暴露较好、龈缘颜色正常,术后修复效果有效率为100%,满意率为77.78%。A组术后无松动,修复效果满意;B组术后50.00%出现Ⅰ度松动,修复效果欠佳,两组修复效果比较差异有显著意义(P<0.05)。术后各阶段两组的PD、PLI、SBI均明显优于术前(P<0.05),但两组术后牙周指数比较差异无显著意义(P>0.05)。结论牙冠延长术有利于残根残冠的保存和修复,但要注意适应证的选择。     

Investigation of hearing loss in patients with acute brucellosis by standard and high-frequency audiometry

This study aimed to determine the effect of acute brucellosis on the auditory system. Forty-two patients with acute brucellosis were evaluated clinically, and with serological and audiological tests, before and after treatment. Hearing threshold averages were calculated at 11 different frequencies (250-8000 Hz) of the auditory airway, and statistical analysis was performed. The average hearing thresholds were > 20 dB, with standard audiometry at 6000-8000 Hz, and < 20 dB at all other frequencies. After treatment, the average auditory threshold decreased to < 20 dB at 6000-8000 Hz (p < 0.0001). Pure-tone hearing thresholds were improved at all frequencies after treatment, with statistically significant differences at all frequencies except 12,000, 14,000 and 16 000 Hz (p < 0.05). There was no permanent hearing loss caused by acute brucellosis, and hearing thresholds were restored after treatment. It was concluded that acute brucellosis affects the auditory system, especially at high frequencies, and that patients with all forms of brucellosis should be evaluated for hearing loss.