Genomic variants within chromosome 14q32.32 regulate bone mass through MARK3 signaling in osteoblasts

Bone mineral density (BMD) is a highly heritable predictor of osteoporotic fracture. GWAS have identified hundreds of loci influencing BMD, but few have been functionally analyzed. In this study, we show that SNPs within a BMD locus on chromosome 14q32.32 alter splicing and expression of PAR-1a/microtubule affinity regulating kinase 3 (MARK3), a conserved serine/threonine kinase known to regulate bioenergetics, cell division, and polarity. Mice lacking Mark3 either globally or selectively in osteoblasts have increased bone mass at maturity. RNA profiling from Mark3-deficient osteoblasts suggested changes in the expression of components of the Notch signaling pathway. Mark3-deficient osteoblasts exhibited greater matrix mineralization compared with controls that was accompanied by reduced Jag1/Hes1 expression and diminished downstream JNK signaling. Overexpression of Jag1 in Mark3-deficient osteoblasts both in vitro and in vivo normalized mineralization capacity and bone mass, respectively. Together, these findings reveal a mechanism whereby genetically regulated alterations in Mark3 expression perturb cell signaling in osteoblasts to influence bone mass.     

脑卒中患者急性应激障碍及影响因素研究

目的探讨脑卒中患者急性应激障碍发生现状及影响因素。方法采用斯坦福急性应激反应问卷对349例脑卒中住院患者进行调查。结果共163例(46.70%)患者发生急性应激障碍;Logistic回归分析结果显示,患者性格、是否存在偏瘫及是否吞咽功能障碍是脑卒中患者发生急性应激障碍的主要影响因素(P0.05,P0.01)。结论脑卒中患者急性应激障碍发生率较高,内向性格及存在偏瘫和吞咽功能障碍的患者更容易发生急性应激障碍。医护人员应及时为高危患者提供个体化治疗及预见性护理,防止脑卒中患者发生急性应激障碍。     

2013-2017年我国四种恶性肿瘤住院费用水平及结构变动度分析

背景　恶性肿瘤给家庭、社会带来了沉重的医疗、经济负担，极易导致部分家庭“因病致贫”或放弃治疗，目前相关研究多集中于单一病种、分散地域的研究，仍缺乏对于全国范围与多病种恶性肿瘤住院费用变化及结构构成的考量。目的　分析2013-2017年我国4种恶性肿瘤住院费用水平以及影响住院费用的主要项目和结构变动情况，为控制医疗费用上涨、深化新医改提供参考依据。方法　本研究数据来源于《2014中国卫生和计划生育统计年鉴》《2015中国卫生和计划生育统计年鉴》《2016中国卫生和计划生育统计年鉴》《2017中国卫生和计划生育统计年鉴》以及《2018中国卫生健康统计年鉴》，样本跨度为2013-2017年。统计“30种疾病人均住院费用”中的胃恶性肿瘤、肺恶性肿瘤、食管恶性肿瘤以及膀胱恶性肿瘤的数据，4种恶性肿瘤的人均住院费用包括药费、检查费、治疗费、手术费和手术材料费。2019年4-8月，采用结构变动度法分析我国2013-2017年4种恶性肿瘤的住院费用的结构变动情况〔结构变动值（VSV）、结构变动度（DSV）、结构变动贡献率〕。结果　2013-2017年，4种恶性肿瘤的人均住院费用逐年上升，其中胃恶性肿瘤的人均住院费用始终最高，且肺恶性肿瘤的人均住院费用上升幅度最大。2013-2017年，在4种恶性肿瘤住院各项费用的占比中，药费占比最高且总体逐年下降。从4种恶性肿瘤住院各项费用的实际变化来看，药费在2013-2014年有所上升，2014-2017年逐年下降；检查费在2013-2014年下降，2014-2017年缓慢上升；手术费与手术材料费在2013-2017年逐年上升。2013-2017年，在4种恶性肿瘤住院各项费用中均是药费的VSV最大；4种恶性肿瘤药费、检查费的VSV均呈负向变化，手术费和手术材料费的VSV均呈正向变化，治疗费的VSV增减均不明显。2013-2017年，4种恶性肿瘤住院费用的DSV从大到小依次为肺恶性肿瘤、胃恶性肿瘤、食管恶性肿瘤、膀胱恶性肿瘤。2013-2017年，4种恶性肿瘤住院各项费用中均是药费的结构变动贡献率最大，治疗费的结构变动贡献率最小；除药费外，胃恶性肿瘤、肺恶性肿瘤住院各项费用中均是手术材料费和手术费的结构变动贡献率次之，食管恶性肿瘤住院各项费用中手术费、检查费的结构变动贡献率次之，膀胱恶性肿瘤住院各项费用中检查费、手术材料费的结构变动贡献率次之。结论　2013-2017年我国4种恶性肿瘤手术费的结构变动贡献率虽然较为理想，但药费、治疗费仍是住院费用结构的重点调整对象；同时为有效降低恶性肿瘤的人均住院费用，应当加强控制手术材料费与检查费；而胃恶性肿瘤与肺恶性肿瘤患者的疾病经济负担严重，若要缓解应加强疾病的早期预防与住院费用管控。     

基于雨课堂的临床流行病学教学改革与实践

目的探讨雨课堂在临床流行病学教学中的作用和效果。方法采用随机对照法在本科阶段无流行病学学习经历的临床专业硕士研究生中,使用雨课堂线上课前预习及课后随堂练习的功能,用于评价雨课堂线上功能的辅助教学效果。结果应用雨课堂线上功能干预组与对照组在基线、阶段小测和末考卷面成绩均无统计学差异;但对于主动学习,雨课堂参与度较高的学生成绩提高明显。结论雨课堂有利于理论性较强课程的学习,但是仍不能忽略课堂教学师生互动过程。     

Fragmentation of care as a barrier to optimal ESKD management

Caring for patients with end-stage kidney disease (ESKD) in the United States is challenging, due in part to the complex epidemiology of the disease's progression as well as the ways in which care is delivered. As CKD progresses toward ESKD, the number of comorbidities increases and care involves multiple healthcare providers from multiple subspecialties. This occurs in the context of a fragmented US healthcare delivery system that is traditionally siloed by provider specialty, organization, as well as systems of payment and administration. This article describes the role of care fragmentation in the delivery of optimal ESKD care and identifies research gaps in the evidence across the continuum of care. We then consider the impact of care fragmentation on ESKD care from the patient and health system perspectives and explore opportunities for system-level interventions aimed at improving care for patients with ESKD.     

Investigation of Bimetallic Nickel Catalysts in Catalyst‐Transfer Polymerization of π‐Conjugated Polymers

A comparative study involving bimetallic nickel catalysts designed from disubstituted N,N,N′,N′‐tetra(diphenylphosphanylmethyl)benzene diamine bridging ligands is reported. Catalyst behavior is explored in the Kumada catalyst‐transfer polymerization (KCTP) using poly(3‐hexylthiophene) (P3HT) as the model system. The success of a controlled polymerization is monitored by analyzing monomer conversion, degree of polymerization, end‐group identity, and molecular weight distribution. The characterization of P3HT obtained from KCTP initiated with the bimetallic catalysts shows chain‐growth behavior; however, the presence of Br/Br end‐groups and broader molecular weight distribution reveals a reduced controlled polymerization compared to the commonly employed Ni(dppp)Cl₂. The observed increase in intermolecular chain transfer and termination processes in KCTP initiation with the bimetallic catalysts can be attributed to a weaker Ni(0)‐π‐aryl complex interaction, which is caused by increased steric crowding of the coordination sphere.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

顶天立地服务需求 注重内涵创建一流——首都医科大学建校60周年教育教学与人才培养成果回顾

首都医科大学通过60年辛勤耕耘、精益求精，秉承“顶天立地”的人才培养理念，为社会培养了大批高水平的学术型与应用型医药卫生人才。回顾学校60年来本专科教育、全科医学教育、国际教育、研究生教育的人才培养成果，以总结经验并鼓舞全体首医人进一步求真务实、凝心聚力、积极进取、追求卓越，努力将学校建设成为国际一流的研究型医科大学。