Stereoselective metabolism of lansoprazole by human liver cytochrome P450 enzymes.

The stereoselective metabolism of lansoprazole enantiomers was evaluated by incubation of human liver microsomes and cDNA-expressed cytochrome p450 (p450) enzymes to understand and predict their stereoselective disposition in humans in vivo. The intrinsic clearances (Clint) of the formation of both hydroxy and sulfone metabolites from S-lansoprazole were 4.9- and 2.4-fold higher than those from the R-form, respectively. The sums of formation Clint of both metabolites were 13.5 and 57.3 microl/min/mg protein for R- and S-lansoprazole, respectively, suggesting that S-lansoprazole would be cleared more rapidly than the R-form. The p450 isoform selective inhibition study in liver microsomes, and the incubation study of cDNA-expressed enzymes, demonstrated that the stereoselective sulfoxidation is mediated by CYP3A4 and that the hydroxylation is mediated by CYP2C9 and CYP3A4 as well as by CYP2C19. Total Clint values of hydroxy and sulfone metabolite formation catalyzed by all these p450 enzymes were consistently higher for S-lansoprazole than for the R-form. The CYP3A4 produced the greatest difference of Clint between S- and R-enantiomers, mainly due to a difference of sulfoxidation metabolism (Clint 76.5 versus 10.8 microl/min/nmol of p450, respectively), whereas CYP2C19-catalyzed hydroxylation resulted in a minor difference of Clint between S- and R-enantiomers (179.6 versus 143.3 microl/min/nmol of p450, respectively). However, the affinity of CYP2C19 on hydroxylation was 5.7-fold higher for S-enantiomer than for the R-form (Km 2.3 versus 13.1 microM), suggesting that the role of CYP2C19 on stereoselective hydroxylation would be more prominent at concentrations around the usual therapeutic level. These findings suggest that both CYP2C19 and CYP3A4 are major enzymes contributing to the stereoselective disposition of lansoprazole, but stereoselective hydroxylation of lansoprazole enantiomers is mainly influenced by CYP2C19, especially at the usual therapeutic doses.     

Allograft rejection results from a failed attempt by the immune system to protect foreign tissue

The focus of our research is to understand the immune response to foreign tissue. We believe that adichotomy exists within the immune response to an allograft such that part of the response is dedicated to the protection of the graft. Nevertheless, in a dominantly graft-aggressive environment, rejection typically ensues. In this article, we describe models that have been set up to test directly the ability of potentially protective aspects of the immune response to prevent allograft rejection. We discussour data in the context of a growing body of exciting and often controversial literature.     

Increasing transplant mass results in long-term allograft survival and recovery from transplant vasculopathy

Late allograft rejection due to transplant vasculopathy continues to be a major clinical problem. Increasing the ratio of donor transplant size to recipient weight has been shown to reduce the incidence of late allograft failure. Using a murine pancreas transplant model we have tested the hypothesis that increasing the donor transplant size in a recipient can promote long-term allograft survival by promoting recovery from transplant vasculopathy. Recipients of an allograft that showed extensive vasculopathy were transplanted with a second donor transplant. The effect of the second allograft on the vasculopathy present in the first graft was measured. Transplanting a second allograft reversed all signs of ongoing rejection, including transplant vasculopathy, resulting in long-term survival of the first graft. Vasculopathy was only reversed if the first and second grafts were from the same mouse strain, suggesting an antigen-specific mechanism. However, the recovery of the first graft was not associated with antigen-specific peripheral tolerance.     

Induction of a TC1-mediated experimental autoimmune thyroiditis by deglycosylated porcine thyroglobulin

Contribution of cytotoxic T lymphocytes (CTL) to experimental autoimmune thyroiditis (EAT) was well defined (Speidel et al., Eur. J. Immunol. 1997, 27, 2391-2399, Ref. 7). The native porcine thyroglobulin (pTg) showed high sensitivity to endo-o-N-acetylglucosaminidase F (Endo F) and its molecular weights, corresponding to about 330 kDa as a monomer and 660 kDa as a dimer, were reduced to smaller molecular weight forms by Endo F and trifluoromethanesulfonic acid (TMSF). Deglycosylated porcine Tg (dgpTg) and native pTg were injected i.v. into CBA/J mice, without the aid of adjuvants. Both lymphocytic infiltrations of the thyroid glands and levels of Tg-specific CTL were similar to those found in conventional EAT induced by Tg and adjuvants. In contrast, proliferative responses in native pTg and dgpTg-injected mice could not be detected, and titers of antibodies to pTg and dgpTg were 20 times and 30 times lower than that of pTg and adjuvants, respectively. The EAT-inducer CTL belonged to the CD8+ cell subset and exerted their thyroiditogenic potential through release of IFN-gamma. It was concluded that dgpTg-induced EAT is mediated by type 1 cytotoxic T cells (Tcl). Also, results that EAT induction of the glycosylated pTg (gpTg) was much lower than that of dgpTg, suggested that the abberant and incomplete glycosylation of the thyroglobulin is responsible for the induction of autoimmune thyroiditis.     

Ag-exchanged NaY zeolite introduced polyvinyl alcohol/polyacrylic acid mixed matrix membrane for pervaporation separation of water/isopropanol mixture

Ag-exchanged NaY zeolite (Ag-NaZ) particles were prepared by ion exchange and introduced to a polyvinyl alcohol (PVA) membrane cross-linked with polyacrylic acid (PAA) for the pervaporation dehydration of an isopropanol (IPA) aqueous mixture. The Ag-exchanged NaY zeolite particles were characterized by FE-SEM, EDS, BET, and XRD studies. The prepared Ag-NaZ-loaded PVA/PAA composite membrane was characterized by FE-SEM, XRD, a swelling study, and contact angle measurements. Pervaporation characteristics were investigated in terms of Ag-NaZ concentrations within PVA/PAA membranes using diverse feed solution conditions. The preferential sorption of IPA/water mixtures for Ag-NaZ-introduced membranes were also determined by calculating the apparent activation energies of IPA and water permeation, respectively. As a result, flux and selectivity increased with the Ag-NaZ concentration to 5 wt% in the membrane. Optimum pervaporation performance was observed in a 5 wt% Ag-NaZ-incorporated membrane with a flux equal to 0.084 kg m⁻² h⁻¹ and a separation factor of 2717.9 at 40 °C from an 80 wt% IPA aqueous feed solution.

Ag-exchanged NaY zeolite (Ag-NaZ) particles were prepared by ion exchange and introduced to a polyvinyl alcohol (PVA) membrane cross-linked with polyacrylic acid (PAA) for the pervaporation dehydration of an isopropanol (IPA) aqueous mixture.     

Is albuminuria an indicator of myocardial dysfunction in diabetic patients without overt heart disease? A study with Doppler strain and strain rate imaging

The aim of this study was to address whether albuminuria could predict myocardial dysfunction in diabetic patients without overt heart disease. We studied 67 patients with normal left ventricular (LV) ejection fraction and no evidence of LV hypertrophy or coronary artery disease (47 patients with type 2 diabetes mellitus and hypertension and 20 patients with hypertension only). Diabetes patients were divided into 3 groups based on albuminuria status: group II = no albuminuria (n = 20, <30 mg/d), group III = microalbuminuria (n = 13, 30-300 mg/d), and group IV = macroalbuminuria (n = 14, >300 mg/d). Twenty patients with hypertension only served as a control group (group I). Conventional 2-dimensional and Doppler echocardiography was done. Peak strain, peak systolic strain rate (SR), and peak diastolic SR of 6 LV segments in the apical views were measured and averaged in each patient. Conventional 2-dimensional parameters such as LV ejection fraction; left atrium volume index; LV mass; deceleration time; and mitral early peak, mitral late peak, myocardial early peak diastolic, and myocardial peak systolic velocities were not different among the 4 groups. However, peak strains were significantly lower in group III (P = .002) and group IV (P < .001) than in group I; and the absolute value of peak systolic SR was lower in group III (P = .033) and group IV (P < .001) than in group I. Furthermore, the value of peak diastolic SR was lower in group IV than in group I (P = .014). In diabetic patients with albuminuria, Doppler strain and SR imaging detected subclinical LV systolic and diastolic dysfunction; and albuminuria was associated with myocardial dysfunction in diabetic patients without overt heart disease.     

The effects of primer precuring on the shear bond strength between gold alloy surfaces and metal brackets

The objective of this study was to investigate the effects of precuring of primer coated on bracket bases on the strength of bonds between metal brackets and gold alloy. Square type III gold alloy plates were sandblasted with 30 μm silicon dioxide. After silica coating, excessive particles were removed gently with air. Silane was then applied, and maxillary central incisor metal brackets were bonded to each conditioned alloy surface with Transbond XT. Half of the specimens were precured at the bracket base after primer coating and the other half was not precured before bonding to the alloy surface. After bracket positioning, samples were cured using a light emitting diode (LED) for 40 seconds. Shear bond strengths were tested and adhesive remnant index (ARI) was evaluated after 1 hour and 24 hours. The primer precuring and 24 hours group exhibited highest bond strength (12.53 MPa) and the no precuring and 1 hour group showed lowest bond strength (5.58 MPa). Precured groups showed lower ARI scores. Due to the shallow curing depth of LED light and inhibition of transillumination at the metal surface, primer precuring at the bracket base is required for secure bracket bonding on gold alloy surfaces using LED curing units.