Hepatotoxicity of cantharidin is associated with the altered bile acid metabolism

Cantharidin (CTD) is an effective antitumor agent. However, it exhibits significant hepatotoxicity, the mechanism of which remains unclear. In this study, biochemical and histopathological analyses complemented with ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS)-based targeted metabolomic analysis of bile acids (BAs) were employed to investigate CTD-induced hepatotoxicity in rats. Sixteen male and female Sprague–Dawley rats were randomly divided into two groups: control and CTD (1.0 mg/kg) groups. Serum and liver samples were collected after 28 days of intervention. Biochemical, histopathological, and BA metabolomic analyses were performed for all samples. Further, the key biomarkers of CTD-induced hepatotoxicity were identified via multivariate and metabolic pathway analyses. In addition, metabolite–gene–enzyme network and Kyoto Encyclopedia of Genes and Genomes pathway analyses were used to identify the signaling pathways related to CTD-induced hepatotoxicity. The results revealed significantly increased levels of biochemical indices (alanine aminotransferase, aspartate aminotransferase, and total bile acid). Histopathological analysis revealed that the hepatocytes were damaged. Further, 20 endogenous BAs were quantitated via UHPLC-MS/MS, and multivariate and metabolic pathway analyses of BAs revealed that hyocholic acid, cholic acid, and chenodeoxycholic acid were the key biomarkers of CTD-induced hepatotoxicity. Meanwhile, primary and secondary BA biosynthesis and taurine and hypotaurine metabolism were found to be associated with the mechanism by which CTD induced hepatotoxicity in rats. This study provides useful insights for research on the mechanism of CTD-induced hepatotoxicity.     

A High Order Bound Preserving Finite Difference Linear Scheme for Incompressible Flows

We propose a high order finite difference linear scheme combined with a high order bound preserving maximum-principle-preserving (MPP) flux limiter to solve the incompressible flow system. For such problem with highly oscillatory structure but not strong shocks, our approach seems to be less dissipative and much less costly than a WENO type scheme, and has high resolution due to a Hermite reconstruction. Spurious numerical oscillations can be controlled by the weak MPP flux limiter. Numerical tests are performed for the Vlasov-Poisson system, the 2D guiding-center model and the incompressible Euler system. The comparison between the linear and WENO type schemes, with and without the MPP flux limiter, will demonstrate the good performance of our proposed approach.     

良性前列腺增生与前列腺慢性炎症的相关性研究进展

良性前列腺增生（BPH）是老年男性常见的泌尿系统疾病，其发病与前列腺慢性炎症之间存在显著相关。感染因子、尿液返流、代谢综合征、衰老过程和自身免疫应答在内的几种刺激，通过相应分子途径引起前列腺免疫细胞的组织定位和组成成分发生广泛改变，从而导致免疫系统失调，之后引发的组织损伤和缓慢愈合，导致了BPH发生和进展。本文通过总结良性前列腺增生与前列腺慢性炎症的相关性的临床研究结果，前列腺免疫细胞在病理生理机制层面与前两者之间的内在联系，以及抗炎药物对BPH-LUTS的干预作用，以其为BPH-LUTS的药物研发提供参考。     

论当前疾病预防控制体系面临的主要问题

对当前的疾病预防控制体系和机构面临的体系不健全、政府投入不充分、事业发展不平衡、人才缺失和能力不足、缺乏系统的理论指导、体系的碎片化严重、与社会经济发展的战略衔接不力、机构内部内生动力和活力不足以及体系治理能力不足等问题做了讨论分析,以期进一步分析在健康中国战略和事业单位机构改革等宏观环境变化所带来的机遇以及疾控体系的发展策略和具体措施,促进疾病预防控制事业在改革中谋发展。     

基于雨课堂的临床流行病学教学改革与实践

目的探讨雨课堂在临床流行病学教学中的作用和效果。方法采用随机对照法在本科阶段无流行病学学习经历的临床专业硕士研究生中,使用雨课堂线上课前预习及课后随堂练习的功能,用于评价雨课堂线上功能的辅助教学效果。结果应用雨课堂线上功能干预组与对照组在基线、阶段小测和末考卷面成绩均无统计学差异;但对于主动学习,雨课堂参与度较高的学生成绩提高明显。结论雨课堂有利于理论性较强课程的学习,但是仍不能忽略课堂教学师生互动过程。     

Association Study of Matrix Metalloproteinases Gene Polymorphisms with Susceptibility to Rheumatoid Arthritis: A Meta-Analysis

Objective: Association of matrix metalloproteinases (MMPs) gene polymorphisms with rheumatoid arthritis is controversial. We conduct a meta-analysis to clarify this dispute.

Methods: We systematically searched the electronic PUBMED, EMBASE and CNKI databases for research articles about MMPs (MMP-1, MMP-2, MMP-3, MMP-9) gene polymorphisms and rheumatoid arthritis (RA) up to January 2015. According to the heterogeneity, fixed-effects or random-effects models were used to calculate crude odds ratios (ORs) and 95% confidence intervals (95% CIs).

Results: A total of 11 articles involving 2143 cases and 2049 controls were included in this meta-analysis. Overall, no significant associations were observed between MMP-1-1607 1G/2G polymorphism and RA. Stratification by ethnicity, no significant associations were observed in Caucasian populations. Similarly, no significant associations were observed between MMP-3-1171 5A/6A, MMP-9-1562 C/T polymorphisms and RA in overall and Caucasian populations, respectively. However, a weak association was found between MMP-2-1306 C/T polymorphism and RA (C vs. T, OR?=?0.813, 95%CI?=?0.694–0.953, p?=?0.010) in overall populations.

Conclusions: The present meta-analysis suggests that MMP-1-1607 1G/2G, MMP-3-1171 5A/6A, MMP-9-1562 C/T polymorphisms are not associated with the susceptibility of RA, but MMP-2 -1306 C/T is weakly associated with susceptibility to RA. Further studies with more sample size are needed for definitive conclusions.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.