China special issue on gastrointestinal tumors-Radiological features of pathological complete response in mismatch repair deficient colorectal cancer after neoadjuvant PD-1 blockade: A post hoc analysis of the PICC phase II trial

Neoadjuvant programmed cell death protein 1 (PD-1) blockade exhibits promising efficacy in patients with mismatch repair deficient (dMMR) colorectal cancer (CRC). However, discrepancies between radiological and histological findings have been reported in the PICC phase II trial (NCT 03926338). Therefore, we strived to discern radiological features associated with pathological complete response (pCR) based on computed tomography (CT) images. Data were obtained from the PICC trial that included 36 tumors from 34 locally advanced dMMR CRC patients, who received neoadjuvant PD-1 blockade for 3 months. Among the 36 tumors, 28 (77.8%) tumors achieved pCR. There were no statistically significant differences in tumor longitudinal diameter, the percentage change in tumor longitudinal diameter from baseline, primary tumor sidedness, clinical stage, extramural venous invasion status, intratumoral calcification, peritumoral fat infiltration, intestinal fistula and tumor necrosis between the pCR and non-pCR tumors. Otherwise, tumors with pCR had smaller posttreatment tumor maximum thickness (median: 10 mm vs 13 mm, P = .004) and higher percentage decrease in tumor maximum thickness from baseline (52.9% vs 21.6%, P = .005) compared to non-pCR tumors. Additionally, a higher proportion of the absence of vascular sign (P = .003, odds ratio [OR] = 25.870 [95% CI, 1.357-493.110]), nodular sign (P < .001, OR = 189.000 [95% CI, 10.464-3413.803]) and extramural enhancement sign (P = .003, OR = 21.667 [2.848-164.830]) was observed in tumors with pCR. In conclusion, these CT-defined radiological features may have the potential to serve as valuable tools for clinicians in identifying patients who have achieved pCR after neoadjuvant PD-1 blockade, particularly in individuals who are willing to adopt a watch-and-wait strategy.     

右美托咪定联合综合体温保护对腔镜手术治疗老年恶性肿瘤患者苏醒期质量及免疫功能的影响

目的 探讨右美托咪定联合综合体温保护对腔镜手术治疗老年恶性肿瘤患者苏醒期质量及免疫功能的影响。方法 选择择期行腔镜手术治疗的老年恶性肿瘤患者90例，随机均分为3组：对照组（C组）、体温保护组（T组）和体温保护联合右美托咪定组（T-D组），每组30例。C组常规体温保护，T组和T-D组综合体温保护；T-D组麻醉诱导前10 min泵注右美托咪定0.5 μg/kg。记录3组患者麻醉诱导开始时（T₀）、手术开始30 min（T₁）、60 min（T₂）、90 min（T₃）、120 min（T₄）以及手术结束时（T₅）的鼻咽温度；于T₀、术后2 h（T₆）、24 h（T₇）和48 h（T₈）时抽取静脉血标本，测定T淋巴细胞亚群（CD3⁺、CD4⁺和CD8⁺）和自然杀伤细胞（NK cell）水平；记录患者术中麻醉药物用量及苏醒期质量指标。结果 与T₀比较，C组T₂～T₅时点鼻咽温度均明显降低（P < 0.05）；与C组比较，T组和T-D组T₂～T₅时点鼻咽温度明显升高（P < 0.05）。与T₀时点比较，C组、T组和T-D组T₆、T₇和T₈时点CD3⁺和NK cell活性均明显降低（P < 0.05）；C组在T₆、T₇和T₈时点，T组和T-D组在T₆和T₇时点，CD4⁺活性均明显降低（P < 0.05）。与C组比较，T组和T-D组T₆和T₇时点CD3⁺细胞活性均明显升高（P < 0.05）；T组在T₇时点，T-D组在T₆和T₇时点，CD4⁺细胞活性均明显升高（P < 0.05）；T组在T₇时点，T-D组在T₆、T₇和T₈时点，NK cell活性均明显升高（P < 0.05）。结论 采用体温保护措施联合右美托咪定能够维持老年恶性肿瘤患者的体温稳定，减少围手术期意外低体温（IPH）的发生，并有效提高患者苏醒期质量，减轻免疫抑制程度，加速患者早期恢复。     

Utility of Tissue Similarity Maps Based on Relative Cerebral Blood Volume for Grading Gliomas as Validated by Histological Results

@@     

BCAN基因在肾透明细胞癌中的表达及临床意义

目的以基因表达数据集资料为研究对象,分析BCAN基因在肾透明细胞癌中的表达情况以及对患者预后的影响。方法在Oncomine数据库中挖掘BCAN在肾透明细胞癌(ccRCC)中的表达情况。从TCGA数据库中获取ccRCC患者临床资料和目的基因的表达信息并进行统计分析。利用GEO数据库中GSE73731数据集的ccRCC样本进行基因富集分析。利用String数据库分析与BCAN相关的蛋白。结果BCAN低表达组的ccRCC患者在病理分期及T分期方面低于高表达组(P<0.001;P=0.001);N分期及M分期差异无统计学意义(P>0.05)。BCAN低表达组患者的总生存期优于高表达组(P=0.033)。BCAN基因高表达组的样本主要富集在KRAS信号通路。结论BCAN可以通过多种途径来促进肿瘤细胞的侵袭能力,有望成为ccRCC不良预后的重要生物标志物之一。     

动物瘢痕模型的相关研究进展

皮肤损伤后的异常愈合会导致病理性瘢痕的产生。病理性瘢痕的出现不仅影响美观,严重时还会造成心理和生理功能障碍。病理性瘢痕的机制研究对于瘢痕治疗有极为重要的意义。其中,动物瘢痕模型是目前研究病理性瘢痕的重要模型手段之一。理想的动物瘢痕模型应该在组织学、细胞学等层面尽可能接近于人类的病理性瘢痕。该文分别从传统技术动物瘢痕中的啮齿类动物模型、兔耳模型和猪模型,以及新技术动物瘢痕模型这两个方面,结合近年来在瘢痕领域应用较多的研究,进行了相应系统的阐述。     

沙鼠肝泡球蚴组织中微血管密度、血管内皮生长因子的表达及意义

目的研究沙鼠肝泡球蚴组织中微血管密度(MVD)-CD34及血管内皮生长因子(VEGF)的表达及意义。方法将60只健康的长爪沙鼠随机平均分为2组,即实验组和对照组。实验组沙鼠采用开腹肝穿刺法,每只鼠接种原头节悬混液0.1 m L,对照组以相同的方法接种等量的PBS。分别于接种后第20、40、60、80、100 d时每组各处死6只沙鼠,实验组分别取泡球蚴组织和泡球蚴周围肝组织,对照组取正常肝组织。免疫组织化学法观察各时间点沙鼠肝泡球蚴组织中MVD-CD34及VEGF的表达情况。结果感染泡球蚴沙鼠肝脏中均见大小不等的团块状囊泡组织,部分播散至腹腔。在感染的各时间点,泡球蚴组织中均可见到MVD-CD34和VEGF的表达,定位于肝泡球蚴组织"外囊"囊壁内皮细胞的细胞浆。在感染后第20 d、40 d、60 d、80 d和100 d时,泡球蚴组织中MVD分别为(9.83±3.87)/HP、(25.33±6.71)/HP、(34.50±5.50)/HP、(37.67±5.71)/HP和(44.67±4.93)/HP,与泡球蚴周围肝组织〔0/HP、(1.17±0.98)/HP、(3.50±1.38)/HP、(5.83±2.71)/HP、(8.83±2.48)/HP〕和正常肝组织(均为0)相比,差异均有统计学意义(P0.05)。各时间点泡球蚴组织中VEGF免疫组织化学评分分别为(2.95±0.46)分、(3.90±0.68)分、(4.27±1.05)分、(5.33±0.95)分和(4.50±0.81)分,与泡球蚴周围肝组织〔(1.07±0.63)分、(1.38±0.75)分、(1.55±0.83)分、(1.67±0.47)分、(2.10±0.55)分〕和正常肝组织〔(1.02±0.83)分、(1.12±0.63)分、(1.26±0.26)分、(1.20±0.74)分、(1.21±0.28)分〕相比,差异均有统计学意义(P0.05)。结论血管生成可能是泡球蚴浸润性生长的机制之一,VEGF可能促进沙鼠肝泡球蚴组织血管新生。     

生命早期抗生素使用与儿童哮喘:因果关系还是混杂效应?

儿童哮喘的发病率逐年上升.基于卫生假说,抗生素使用可能减少了微生物暴露,从而增加了过敏性疾病发生的风险.近十年来,就早期抗生素暴露与儿童哮喘的关系进行的大量的流行病学调查的结果并不一致.大多数回顾性研究发现正相关联系,但前瞻性研究未发现联系或联系强度较弱.逆向因果和指示混淆可部分解释两者的关系,但也难以否定因果关系的存在.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.