China special issue on gastrointestinal tumors-Radiological features of pathological complete response in mismatch repair deficient colorectal cancer after neoadjuvant PD-1 blockade: A post hoc analysis of the PICC phase II trial

Neoadjuvant programmed cell death protein 1 (PD-1) blockade exhibits promising efficacy in patients with mismatch repair deficient (dMMR) colorectal cancer (CRC). However, discrepancies between radiological and histological findings have been reported in the PICC phase II trial (NCT 03926338). Therefore, we strived to discern radiological features associated with pathological complete response (pCR) based on computed tomography (CT) images. Data were obtained from the PICC trial that included 36 tumors from 34 locally advanced dMMR CRC patients, who received neoadjuvant PD-1 blockade for 3 months. Among the 36 tumors, 28 (77.8%) tumors achieved pCR. There were no statistically significant differences in tumor longitudinal diameter, the percentage change in tumor longitudinal diameter from baseline, primary tumor sidedness, clinical stage, extramural venous invasion status, intratumoral calcification, peritumoral fat infiltration, intestinal fistula and tumor necrosis between the pCR and non-pCR tumors. Otherwise, tumors with pCR had smaller posttreatment tumor maximum thickness (median: 10 mm vs 13 mm, P = .004) and higher percentage decrease in tumor maximum thickness from baseline (52.9% vs 21.6%, P = .005) compared to non-pCR tumors. Additionally, a higher proportion of the absence of vascular sign (P = .003, odds ratio [OR] = 25.870 [95% CI, 1.357-493.110]), nodular sign (P < .001, OR = 189.000 [95% CI, 10.464-3413.803]) and extramural enhancement sign (P = .003, OR = 21.667 [2.848-164.830]) was observed in tumors with pCR. In conclusion, these CT-defined radiological features may have the potential to serve as valuable tools for clinicians in identifying patients who have achieved pCR after neoadjuvant PD-1 blockade, particularly in individuals who are willing to adopt a watch-and-wait strategy.     

右美托咪定联合综合体温保护对腔镜手术治疗老年恶性肿瘤患者苏醒期质量及免疫功能的影响

目的 探讨右美托咪定联合综合体温保护对腔镜手术治疗老年恶性肿瘤患者苏醒期质量及免疫功能的影响。方法 选择择期行腔镜手术治疗的老年恶性肿瘤患者90例，随机均分为3组：对照组（C组）、体温保护组（T组）和体温保护联合右美托咪定组（T-D组），每组30例。C组常规体温保护，T组和T-D组综合体温保护；T-D组麻醉诱导前10 min泵注右美托咪定0.5 μg/kg。记录3组患者麻醉诱导开始时（T₀）、手术开始30 min（T₁）、60 min（T₂）、90 min（T₃）、120 min（T₄）以及手术结束时（T₅）的鼻咽温度；于T₀、术后2 h（T₆）、24 h（T₇）和48 h（T₈）时抽取静脉血标本，测定T淋巴细胞亚群（CD3⁺、CD4⁺和CD8⁺）和自然杀伤细胞（NK cell）水平；记录患者术中麻醉药物用量及苏醒期质量指标。结果 与T₀比较，C组T₂～T₅时点鼻咽温度均明显降低（P < 0.05）；与C组比较，T组和T-D组T₂～T₅时点鼻咽温度明显升高（P < 0.05）。与T₀时点比较，C组、T组和T-D组T₆、T₇和T₈时点CD3⁺和NK cell活性均明显降低（P < 0.05）；C组在T₆、T₇和T₈时点，T组和T-D组在T₆和T₇时点，CD4⁺活性均明显降低（P < 0.05）。与C组比较，T组和T-D组T₆和T₇时点CD3⁺细胞活性均明显升高（P < 0.05）；T组在T₇时点，T-D组在T₆和T₇时点，CD4⁺细胞活性均明显升高（P < 0.05）；T组在T₇时点，T-D组在T₆、T₇和T₈时点，NK cell活性均明显升高（P < 0.05）。结论 采用体温保护措施联合右美托咪定能够维持老年恶性肿瘤患者的体温稳定，减少围手术期意外低体温（IPH）的发生，并有效提高患者苏醒期质量，减轻免疫抑制程度，加速患者早期恢复。     

牙支持3D导板辅助穿刺卵圆孔射频热凝治疗三叉神经痛的疗效分析

目的:探讨牙支持式3D打印导板辅助穿刺卵圆孔射频热凝治疗三叉神经痛术中术后的疗效分析.方法:对2019年1月～2021年5月收治的三叉神经痛患者40人,根据患者需要随机分成2组:A组(对照组),常规按照Hartel前入路法穿刺卵圆孔,进入卵圆孔后,耳-床线定位确定入颅深度后行射频治疗.B组(导板组),采用3D导板,给患者戴上导板固定后,完成穿刺,耳-床线定位确定入颅深度后行射频治疗.分析2组的术前疼痛评分(VAS)术后即刻及术后1月疼痛消失的有效率,手术时间,穿刺次数,并发症,穿刺的偏移程度.结果:与对照组A组比较在术后即刻有效率、术后1月随访有效率比较无统计学差异(P>0.05).在穿刺次数、穿刺偏移率、手术时间、并发症两组间比较有统计学差异(P<0.05).导板与牙齿紧密贴合率100％.结论:3D打印导板应用于穿刺卵圆孔具有明显的优势,可以减少患者创伤,减少X线辐射,减少穿刺偏移,术后疗效肯定,值得广泛应用.     

Utility of Tissue Similarity Maps Based on Relative Cerebral Blood Volume for Grading Gliomas as Validated by Histological Results

@@     

Use of a dual lumen port for automated red cell exchange in adults with sickle cell disease

Red cell exchange (RCE) is a common procedure in adults with sickle cell disease (SCD). Implantable dual lumen Vortex (DLV) ports can be used for RCE in patients with poor peripheral venous access. We performed a retrospective cohort study of RCE procedures performed in adults with SCD. The main objective of the study was to compare the inlet speed, duration of procedures and rate of complications performed through DLV ports to those performed through temporary central venous and peripheral catheters. Twenty‐nine adults with SCD underwent a total of 318 RCE procedures. Twenty adults had DLV ports placed and 218 procedures were performed using DLV ports. Mean length of follow‐up after DLV port placement was 397 ± 263 days. Six DLV ports were removed due to infection and 1 for malfunction after a mean of 171 ± 120 days. Compared to temporary central venous and peripheral catheters, DLV port procedures had a greater rate of procedural complications, a longer duration, and a lower inlet speed (all P < 0.01). When accounting for the maximum allowable inlet speed to avoid citrate toxicity, 40% of DLV port procedures were greater than 10% below maximum speed, compared to 7 and 14% of procedures performed through temporary central venous and peripheral catheters (P < 0.0001). In conclusion, DLV ports can be used for RCE in adults with SCD, albeit with more procedural complications and longer duration. The smaller internal diameter and longer catheter of DLV ports compared to temporary central venous catheters likely accounts for the differences noted. J. Clin. Apheresis 30:353–358, 2015. © 2015 Wiley Periodicals, Inc.     

生命早期抗生素使用与儿童哮喘:因果关系还是混杂效应?

儿童哮喘的发病率逐年上升.基于卫生假说,抗生素使用可能减少了微生物暴露,从而增加了过敏性疾病发生的风险.近十年来,就早期抗生素暴露与儿童哮喘的关系进行的大量的流行病学调查的结果并不一致.大多数回顾性研究发现正相关联系,但前瞻性研究未发现联系或联系强度较弱.逆向因果和指示混淆可部分解释两者的关系,但也难以否定因果关系的存在.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.