Sexual function may be impaired during pregnancy in adolescent women

Prevalence of sexual dysfunctions is reported as high as 70% during pregnancy. However, there are limited data about the burden of sexual dysfunction in pregnant adolescents. This cross-sectional study was conducted in the outpatient antenatal clinic of our institution between October and December 2014. The total female sexual function index scores and domain scores were compared between adolescent and adult pregnant women. A total of 121 pregnant women participated in the study. Of those women, 29 (24.0%) were 21 years old or younger (Group 1), whereas the remaining were older (Group 2). The sexual dysfunction ratios were 41.4% and 23.9% in Groups 1 and 2, respectively (p = 0.068). The desire (3.29 vs. 2.79, p = 0.024) and arousal (3.48 vs. 2.71, p = 0.008) domain scores of adolescent pregnant women were significantly higher whereas the remaining domain scores (i.e. lubrication, orgasm, satisfaction and pain) were not significantly different. The adolescent women seem to be more prone to sexual dysfunctions during the course of pregnancy, especially in the third trimester. The health care providers should consider discussing the sexual life during pregnancy as a part of routine antenatal visit to improve sexual function and quality of life, especially among adolescent pregnant population.     

Impact of Myocardial Acceleration during Isovolumic Contraction in Evaluating Subclinical Right Ventricular Systolic Dysfunction in Type 2 Diabetes Mellitus Patients

Aim: In diabetes mellitus (DM) patients, left ventricular dysfunction is widely evaluated and established by conventional diagnostic methods, whereas right ventricular (RV) function is not as sufficiently evaluated. The aim of this study is to assess the preclinical effects of DM on RV function by using novel Tissue Doppler Imaging (TDI)‐derived indices. Methods: The study included 96 patients with type II DM [60 with DM only and 36 patients with coexisting DM and hypertension (DMHT)] and 40 healthy controls. Conventional parameters and TDI‐derived systolic velocities of tricuspid annulus [isovolumic myocardial acceleration (IVA), peak myocardial velocity during isovolumic contraction (IVV), peak systolic velocity during ejection period (Sa), RV Tei index] were measured. Results: TDI‐derived RV IVA was significantly lower in both DM and DMHT patients compared to controls indicating subclinical impairment in RV systolic function in the study patients (P = 0,0001). However RV IVA was similar in DM and DMHT subgroup supporting RV systolic impairment in DM was independent from HT. In correlation analysis, RV IVA was significantly correlated with the existence of diabetic nephropathy (r =?0,38; P = 0,003), retinopathy (r =?0,35; P = 0,006), insulin resistance (r =?0,52; P = 0,0001). Conclusions: Diabetes is associated with subclinical RV systolic dysfunction, regardless of coexisting hypertension. Tissue Doppler‐derived IVA; is a novel, non‐invasive parameter which may be used in early detection of RV systolic dysfunction in patients with DM. (Echocardiography 2010;27:1211‐1218)     

Short-term antidepressant treatment of comorbid dental anxiety in patients with panic disorder

Objectives. The aims of this study were to determine the frequency of dental anxiety (DA) and dental phobia (DP) in panic disorder, and to follow the changes in DA levels during antidepressant treatment of panic disorder. Methods. Fifty-three controls and 102 panic disorder patients were assessed using the Structured Clinical Interview (SCID), the Panic-Agoraphobia Scale (PAS), and the Corah Dental Anxiety Scale (DAS). Oral health status was defined by the number of decayed, missing, and filled teeth (DMFT) index. The patients were classified into three groups: (1) those without dental anxiety (WDA), (2) those with dental anxiety (DA), and (3) those with dental phobia (DP). All patients were treated with antidepressants for 3 months and the response rates were assessed. Results. At baseline, DAS was significantly higher in both the DA and the DP groups than in the control group. Ten (9.8%) of the panic disorder patients fulfilled the diagnostic criteria for DP; 31 (30.4%) had severe DA. In the control group, none of the patients was diagnosed as DP, whereas 7 (13.5%) had severe DA. Panic disorder and DA both responded to the antidepressant treatment, but DAS scores remained significantly higher in the DP group than in the DA group and the control group at the end of the third month. Conclusions. Our data suggest that both DA and DP are more frequent in panic disorder than in healthy controls. Antidepressant treatment may have been helpful in decreasing DA levels in the DA group but not in the DP group.     

Design,synthesis, and in vitro biological evaluation of novel thiazolopyrimidine derivatives as antileishmanial compounds

A series of thiazolopyrimidine derivatives was designed and synthesized as a Leishmania major pteridine reductase 1 (LmPTR1) enzyme inhibitor. Their LmPTR1 inhibitor activities were evaluated using the enzyme produced by Escherichia coli in a recombinant way. The antileishmanial activity of the selected compounds was tested in vitro against Leishmania sp. Additionally, the compounds were evaluated for cytotoxic activity against the murine macrophage cell line RAW 264.7. According to the results, four compounds displayed not only a potent in vitro antileishmanial activity against promastigote forms but also low cytotoxicity. Among them, compound L16 exhibited an antileishmanial activity for both the promastigote and amastigote forms of L. tropica, with IC₅₀ values of 7.5 and 2.69 µM, respectively. In addition, molecular docking studies and molecular dynamics simulations were also carried out in this study. In light of these findings, the compounds provide a new potential scaffold for antileishmanial drug discovery.     

Association of doripenem resistance with OXA-type carbapenemases in Acinetobacter baumannii isolates

Objectives:

To evaluate the in vitro activity of doripenem in Acinetobacter baumannii (A. baumannii) clinical isolates that possess different OXA-type carbapenemases, and to evaluate the roles of these enzymes in the development of carbapenem resistance.

Methods:

This retrospective study was conducted with 25 A. baumannii isolates at Sakarya University Training and Research Hospital, Sakarya, Turkey from June to October 2014. Antibiotic susceptibility testing was carried out using the Vitek-2 automated system (bioMérieux, Marcy l’Etoile, France). Minimum inhibitory concentrations (MICs) were determined using Etest strips (bioMérieux, Marcy l’Etoile, France). Quantitative polymerase chain reaction was performed in a Fluorion Instrument (Iontek, Istanbul, Turkey).

Results:

Isolates were divided into 5 groups based on their susceptibility profiles and OXA-type carbapenemase positivity. Group 2 isolates whose MIC of both meropenem and doripenem are in the range of 4-32 µg/mL were negative for both bla_OXA-23 and bla_OXA-58. Group 3 isolates whose MIC of meropenem and doripenem is in the range of 4-32 µg/mL, bla_OXA-23 is positive, and bla_OXA-58 is negative. Group 5 isolates whose MIC of meropenem is >32 µg/mL, and that of doripenem is in the range of 16-32 µg/mL were positive for both bla_OXA-23 and bla_OXA-58.

Conclusion:

The bla_OXA-23 and bla_OXA-58 gene combinations may confer resistance with a much greater MIC of both meropenem and doripenem. However, the presence of bla_OXA-58 alone was not correlated with doripenem resistance.The rise of antibiotic resistance is an increasingly important threat, particularly for infections caused by Acinetobacter baumannii (A. baumannii). The use of carbapenems to treat A. baumannii infection has resulted in outbreaks of infection with carbapenem-resistant Acinetobacter spp.1 We are now faced with more problematic drug-resistant pathogens that threaten to move us into what some consider the post-antibiotic era of infectious diseases. Regardless, a potential strategy is to focus on the relation of molecular characterization of the isolates and the response to antimicrobial theraphy.2 Carbapenem resistance in Acinetobacter spp. has been ascribed to the recruitment and production of carbapenem-hydrolyzing class D β-lactamases (CHDLs), and to a lesser extent metallo-β-lactamases. In A. baumannii, the CHDLs can be intrinsic (OXA-51-like), or acquired (OXA-23-like, OXA-24-like, and OXA-58-like).3 Although these enzymes weakly hydrolyze carbapenems, they can confer strong resistance when bla_OXA genes are overexpressed, as a result of their association with mobile elements, such as ISAba1, which carries a strong promoter.4 The bla_OXA-23 gene, in association with ISAba1 is spread by A. baumannii worldwide, and is the most prevalent OXA allele in isolates from Turkey.3,5 However, the carbapenem against, which antibiotic resistance emerges according to OXA gene status is unknown. The purpose of this study was to evaluate the in vitro activity of doripenem in a collection of A. baumannii clinical isolates that possess different OXA-type carbapenemases, and to evaluate the roles of these enzymes in the development of carbapenem resistance.     

Optimization of Manufacturing Parameters and Tensile Specimen Geometry for Fused Deposition Modeling (FDM) 3D-Printed PETG

Additive manufacturing provides high design flexibility, but its use is restricted by limited mechanical properties compared to conventional production methods. As technology is still emerging, several approaches exist in the literature for quantifying and improving mechanical properties. In this study, we investigate characterizing materials’ response of additive manufactured structures, specifically by fused deposition modeling (FDM). A comparative analysis is achieved for four different tensile test specimens for polymers based on ASTM D3039 and ISO 527-2 standards. Comparison of specimen geometries is studied with the aid of computations based on the Finite Element Method (FEM). Uniaxial tensile tests are carried out, after a careful examination of different slicing approaches for 3D printing. We emphasize the effects of the chosen slicer parameters on the position of failures in the specimens and propose a simple formalism for measuring effective mechanical properties of 3D-printed structures.