Somatostatin Receptor Localization of Pancreatic Endocrine Tumors

n = 39) than conventional imaging studies (MRI, n = 25; CT, n = 13); 23 of 24 patients had positive octreotide scintigraphy, 17 of 24 had positive MRI-scans, and 12 of 24 patients had positive CT scans. It was concluded that ¹¹¹ In-octreotide scintigraphy combined with conventional imaging improves the preoperative localization of presumably tumorous lesions in patients with gastroenterohepatic endocrine tumors.     

The preparation and characterization of fine dusts carried out in the Clinica del Lavoro di Milano in support of experimental studies

This paper aims to illustrate the conditions selected at the Clinica del Lavoro of the University of Milan to prepare and analyze a large number of fine dust samples produced over a period of about 50 years, that were initially used for studies within the Clinic performed in its own facilities, and since 1956 were sent to other Italian and overseas laboratories (Luxembourg, UK, Germany, Norway, Sweden, South Korea, USA). The total quantity of material distributed (with maximum size 7-10 microns) was about 2 kg and consisted of the following mineral and artificial compounds: quartz, HF-treated quartz, tridymite, HF-treated tridymite, cristobalite, chromite, anthracite, quartz sand for foundry moulds, sand from the Lybian desert, vitreous silica, pumice, cement, as well small quantities of metallic oxides, organic resins, chrysotile, crocidolite, fibres (vitreous, cotton and polyamidic). About half of the entire quantity of dusts produced consisted of partially HF-treated tridymite. Initially, research on the etiology of silicosis used quartz dust samples, simply sieved or ventilated (consisting of classes finer than 0.04 mm, containing a 15-20% respirable fraction). From 1956 to 1960 the dusts were produced by manual grinding in an agate mortar, below about 10 microns, starting from quartz from Quincinetto (near Ivrea, Province of Turin), containing about 99.5% quartz: particle size and composition were checked using an optical-petrographic technique, with identification of the free and total silica content. Subsequently, the dusts used for biological research were obtained by grinding coarse material with a cast iron pestle and planetary mills, agate and corundum jars. The grinding products were sized by means of centrifugal classification, using the selector developed by N. Zurlo, ensuring control of dust size both optically and by means of wet levigators and hydraulic classifiers (in cooperation with the Institute of Mines of Turin Polytechnic School). After 1990 pestles and rotating drum mills with autogenic grinding load were used for grinding: the size of the treated samples was reduced to 0.05 mm and an extremely fine fraction was extracted, smaller than 7-10 microns, which was used for pneumoconioses research. The characterization of the dust produced was in any case achieved by means of preliminary examination under the optical microscope (polarized light, sometimes supplemented with phase contrast), followed by quantitative analysis using chemical/petrographic, chemical diffraction or, more commonly, petrographic/diffraction techniques. Microscopic examination, if necessary supplemented with photo-micrography, was also used for particle size control, for numerical counting and subsequent reference to weight proportion. For all operational procedures the essential data on instruments and methods are reported. During studies on production, separation of fine dusts and their characterization, partly performed with support from the European Community (EEC/European Coal and Steel Commission), the following topics in particular were addressed: connections between particle size and free silica content in the measurable dust size fraction of the grinding products and in airborne dusts; characteristics of the dusts and risk indices in Italian iron and pyrite mines; possibility of abatement of the ultrafine classes of airborne dusts in pneumatically filled stopes by the addition of salts; comparison of the latest dust selectors used within the European Community; influence of the grinding methods on the results of fibrous and soft mineral measurement using X-ray diffraction analysis.     

Sensitivity, precision and resolution of the optical microscope in the study of environmental pollution by asbestos fibers]

The authors comment on the methods and equipment used in two Italian laboratories for sampling and microscopic phase contrast analysis of asbestos and other respirable fibres in the air of the general environment, i.e., the Dust Analysis Laboratory, Industrial Hygiene and Toxicology Department of the Institute of Occupational Health (Clinica del Lavoro), University of Milan and the Technical Microscopy Laboratory, Ground Resources and Land Control (Georisorse e Territorio) Department of Turin Polytechnic, which use identical methods. Airborne dust samples are taken with personal samplers, 1 l/min air flow (sample duration 4-8 h), filtering air on 25 mm diameter, 0.8 micropore cellulose filters (about 300 mm total net surface of dust deposit). The following equipment is used for counting and analysis of fibres: a) Clinica del Lavoro, Milan: Polyvar Reichert-Jung microscope, 500 magnitudes, Zernike positive phase contrast; numerical counting on 100 whole ocular fields, equal to 6.38% of the total net surface of dust deposit on the membrane; b) Turin Polytechnic: Leitz Ortholux microscope, 500 magnitudes, Heine and Zernike phase contrast with mean standard contrast; numerical counting on square grid, with explored surface total equal to 1.68% of the total net surface of dust deposit on the membrane. Measurements performed: Clinica del Lavoro, Milan: 2,980 since 1960; Turin Polytechnic: 875 since 1965. The sensitivity of the methods for counting airborne fibres is discussed, concluding that the methods used by the two laboratories have a sensitivity between 0.05 and 1.6 fibre/litre of air, according to the overall dustiness of the environment under study. Analysis of the accuracy of the optic determinations, based on the repeated counts, shows a repeatability of 0.4 (40%) within 95% confidence limits. A resolution power of 0.35 microns is reported; however, the possibility exists (and is normally achieved in analytical practice in both laboratories) of identifying and counting fibrous elements up to 0.1-0.3 microns in diameter; this is possible in particular conditions, i.e., when there is a marked difference between the "mean" refraction index of the fibres and that of the diaphanizing liquid. For qualitative determinations of the various types of asbestos, however, analyses are limited to diameters greater than 0.5-0.8 microns, since it is necessary to be able to assess optical properties (refraction indices, basically). In the concluding discussion, comments and bibliographic references are also given concerning the comparisons with possibilities of studying fibrous particulate matter via electron microscopy.     

Is proliferative colonic disease presentation changing?

AIM: To compare the site, age and gender of cases of colorectal cancer (CRC) and polyps in a single referral center in Rome, Italy, during two periods.METHODS: CRC data were collected from surgery/pathology registers, and polyp data from colonoscopy reports. Patients who met the criteria for familial adenomatous polyposis, hereditary non-polyposis colorectal cancer syndrome or inflammatory bowel disease were excluded from the study. Overlap of patients between the two groups (cancers and polyps) was carefully avoided. The χ² statistical test and a regression analysis were performed.RESULTS: Data from a total of 768 patients (352 and 416 patients, respectively, in periods A and B) who underwent surgery for cancer were collected. During the same time periods, a total of 1693 polyps were analyzed from 978 patients with complete colonoscopies (428 polyps from 273 patients during period A and 1265 polyps from 705 patients during period B). A proximal shift in cancer occurred during the latter years for both sexes, but particularly in males. Proximal cancer increased > 3-fold in period B compared to period A in males [odds ratio (OR) 3.31, 95%CI: 2.00-5.47; P < 0.0001). A similar proximal shift was observed for polyps, particularly in males (OR 1.87, 95%CI: 1.23-2.87; P < 0.0038), but also in females (OR 1.62, 95%CI: 0.96-2.73; P < 0.07).CONCLUSION: The prevalence of proximal proliferative colonic lesions seems to have increased over the last decade, particularly in males.     

Lack of alpha-1 integrin alters lesion morphology during pulmonary Mycobacterium tuberculosis infection

The hallmark of Mycobacterium tuberculosis infection is the granuloma, a highly dynamic immune structure that contains the bacilli during chronic infection. Here, we examined if alpha1beta1 integrin is required in the development and maintenance of the granulomatous structure during pulmonary infection using the alpha1 integrin knockout (alpha1-null) mouse. The alpha1beta1 integrin is expressed on activated macrophages and T cells, and interacts with collagen molecules in the extracellular matrix (ECM), and thus may play a role in the granulomatous process. Following pulmonary infection with virulent M. tuberculosis, lungs of alpha1-null infected mice had striking differences in granuloma structure, as well as distinct and markedly thickened alveolar septae. By day 180, there were regions of cell death within granulomatous lesions, characterized by cellular debris in these mice. To determine if this molecule was necessary for T cell trafficking within the lungs, the expression of CD4, CD44 and CD62L was monitored. The number of activated and IFN-gamma-producing CD4(+) T cells increased in the lungs of alpha1-null mice during the chronic phase of infection, although they had decreased concentrations of TNF-alpha and MMP-9. These results suggest that while alpha1beta1 integrin is not required for trafficking or maintenance of T cells in M. tuberculosis infected lungs, it does play a role in granuloma structure and integrity during the chronic phase of infection.     

MEF2C deletions and mutations versus duplications: A clinical comparison

5q14.3 deletions including the MEF2C gene have been identified to date using genomic arrays in patients with severe developmental delay or intellectual disability, stereotypic behavior, epilepsy, cerebral malformations and a facial gestalt not really distinctive though characterized by broad and/or high, bulging forehead, upslanting palpebral fissures, flat nasal root and bridge, small, upturned nose, hypotonic small mouth resulting in cupid bow/tented upper lip. MEF2C mutations have been also identified in patients with overlapping phenotype so that it is considered the gene responsible for the 5q14.3 deletion syndrome. To date, one single duplication including MEF2C has been reported in a patient with intellectual disability but its clinical significance remains uncertain also because of the large size of the imbalance. Here we present two further patients with 5q14.3 duplications including MEF2C. Their phenotype indeed suggest the pathogenic effect of the MEF2C duplication although other duplicated genes also brain expressed might contribute to the clinical features. In none of them a clear-cut syndrome can be identified. A comparison between MEF2C deleted/mutated and duplicated patients is also presented.