潜伏期脑胎盘率对预测新生儿不良结局的价值

目的 探讨低危单胎的足月妊娠自然临产后，潜伏期脑胎盘率(CPR)对预测新生儿不良结局的价值。方法 选取2018年1月至2021年3月我院住院临产分娩的673例孕妇为研究对象，测量胎儿大脑中动脉、脐动脉血流参数，获得分娩结局及新生儿结局。参考既往研究得出的不同孕周CPR正常参考值百分位作为分组指标(CPR≤10%参考值定为低CPR)。比较低CPR组(72例)与正常CPR组(601例)两组妊娠结局、新生儿不良结局。结果 低CPR组与正常CPR组在孕妇年龄、孕龄、产次、孕期体质量增长、总产程、新生儿体质量的构成上差异均无统计学意义(P>0.05)。低CPR组因胎儿窘迫行剖宫产或助产发生率、新生儿任一不良结局发生率、新生儿不良结局率均高于正常CPR组，差异均有统计学意义(P<0.05)。低CPR预测新生儿不良结局的准确率为89.5%(602/673),敏感度为51.7%(15/29),特异度为91.1%(587/644)。结论 本研究数据显示，对于无并发症及合并症、低风险的单胎足月妊娠，潜伏期低CPR与新生儿不良结局相关。     

Hepatotoxicity of cantharidin is associated with the altered bile acid metabolism

Cantharidin (CTD) is an effective antitumor agent. However, it exhibits significant hepatotoxicity, the mechanism of which remains unclear. In this study, biochemical and histopathological analyses complemented with ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS)-based targeted metabolomic analysis of bile acids (BAs) were employed to investigate CTD-induced hepatotoxicity in rats. Sixteen male and female Sprague–Dawley rats were randomly divided into two groups: control and CTD (1.0 mg/kg) groups. Serum and liver samples were collected after 28 days of intervention. Biochemical, histopathological, and BA metabolomic analyses were performed for all samples. Further, the key biomarkers of CTD-induced hepatotoxicity were identified via multivariate and metabolic pathway analyses. In addition, metabolite–gene–enzyme network and Kyoto Encyclopedia of Genes and Genomes pathway analyses were used to identify the signaling pathways related to CTD-induced hepatotoxicity. The results revealed significantly increased levels of biochemical indices (alanine aminotransferase, aspartate aminotransferase, and total bile acid). Histopathological analysis revealed that the hepatocytes were damaged. Further, 20 endogenous BAs were quantitated via UHPLC-MS/MS, and multivariate and metabolic pathway analyses of BAs revealed that hyocholic acid, cholic acid, and chenodeoxycholic acid were the key biomarkers of CTD-induced hepatotoxicity. Meanwhile, primary and secondary BA biosynthesis and taurine and hypotaurine metabolism were found to be associated with the mechanism by which CTD induced hepatotoxicity in rats. This study provides useful insights for research on the mechanism of CTD-induced hepatotoxicity.     

良性前列腺增生与前列腺慢性炎症的相关性研究进展

良性前列腺增生（BPH）是老年男性常见的泌尿系统疾病，其发病与前列腺慢性炎症之间存在显著相关。感染因子、尿液返流、代谢综合征、衰老过程和自身免疫应答在内的几种刺激，通过相应分子途径引起前列腺免疫细胞的组织定位和组成成分发生广泛改变，从而导致免疫系统失调，之后引发的组织损伤和缓慢愈合，导致了BPH发生和进展。本文通过总结良性前列腺增生与前列腺慢性炎症的相关性的临床研究结果，前列腺免疫细胞在病理生理机制层面与前两者之间的内在联系，以及抗炎药物对BPH-LUTS的干预作用，以其为BPH-LUTS的药物研发提供参考。     

空间频域成像在皮肤病定量评估中的研究

利用空间频域成像技术搭建的成像系统检测多种皮肤病组织的光学参数和生理参数信息，并对比分析讨论不同类型的皮肤病与光学参数、生理参数之间的关系。实验结果表明，病变皮肤组织与正常皮肤组织之间在光学参数、生理参数上存在较大差异，这将为临床医生对皮肤病诊治提供一种新颖、可靠、科学的评估方法。     

应用国产封堵器在治疗先天性心脏病的临床疗效分析

目的 总结国产封堵器经皮和经胸途径治疗先天性心脏病的临床疗效。方法 回顾性分析我院2013年1月至2017年12月在X线透视下或单纯超声心动图引导下采用经皮穿刺股静脉或股动静脉法，或者食管超声心动图监测下经胸小切口行先天性心脏病封堵1186例，其中经皮X线下封堵1081例、经皮单纯超声引导下封堵42例、经胸封堵63例；其中动脉导管未闭（ patent ductus arteriole，PDA）426例、房间隔缺损（atrial septal defect，ASD）363例、室间隔缺损（ventricular septal defect，VSD）348例、卵圆孔未闭11例、房间隔缺损合并室间隔缺损9例、房间隔缺损合并动脉导管未闭6例、房间隔缺损合并肺动脉瓣狭窄（pulmonary stenosis，PS）12例、动脉导管未闭合并肺动脉瓣狭窄8例、主肺动脉侧支封堵3例[经胸封堵66例改为63例，PDA443例改为426例]。结果 全组病例成功率98.2％（1165/1186），无死亡病例。随访1~36个月，术后第1、3、6、12个月及术后每年常规行超声心动图及心电图检查。术后第1、6、12个月的随访率分别为 92.9%（1102/1186）、84.1%（998/1186）、70.5%（836/1186）。超声心动图提示少量残余分流（<3 mm）18例；三尖瓣少量反流33例，中量反流5例；主动脉瓣轻度反流5例，中度反流1例；心律失常Ⅲ°房室传导阻滞（Avionics Bulletin，AVB[房室传导阻滞（Avionics Bulletin，AVB）]）1 例，Ⅱ°AVB 3例，完全性左束支3例，交界性心动过速3例，交界性逸搏2例。结论 国产封堵器在先天性心脏病封堵治疗中具有成功率高、创伤小、并发症低、操作容易、疗效确切、恢复快等特点，是治疗先天性心脏病的理想方法。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.