Partitioning a daily mechanical stimulus into discrete loading bouts improves the osteogenic response to loading.

A single 3-minute bout of mechanical loading increases bone formation in the rat tibia. We hypothesized that more frequent, shorter loading bouts would elicit a greater osteogenic response than a single 3-minute bout. The right tibias of 36 adult female Sprague-Dawley rats were subjected to 360 bending cycles per day of a 54 N force delivered in 1, 2, 4, or 6 bouts on each of the 3 loading days. Rats in the 6-bouts/day group received 60 bending cycles per bout (60 x 6); rats in the 4-bouts/day group received 90 bending cycles per bout (90 x 4); the 2- and 1-bouts/day groups received 180 and 360 bending cycles per bout, respectively (180 x 2 and 360 x 1). A nonloaded, age-matched control group (0 x 0) and two sham-bending groups (60 x 6 and 360 x 1) also were included. Fluorochrome labeling revealed a 10-fold increase in endocortical lamellar bone formation rate (BFR/bone surface [BS]) in the right tibia versus the left (nonloaded) side in the 60 x 6 bending group. Endocortical BFR/BS in the right tibia of the 4-, 2-, and 1-bout bending groups exhibited 8-, 4-, and 4-fold increases, respectively, over the control side. Relative (right minus left) values for endocortical BFR/BS, mineralizing surface (MS/BS), and mineral apposition rate (MAR) were 65-94% greater in the 90 x 4 and 60 x 6 bending groups compared to the 360 x 1 bending group. Sham-bending tibias exhibited relative endocortical bone formation values similar to those collected from the control (0 x 0) group. The data show that 360 daily loading cycles applied at intervals of 60 x 6 or 90 x 4 represent a more osteogenic stimulus than 360 cycles applied all at once, and that mechanical loading is more osteogenic when divided into discrete loading bouts. Presumably, bone cells become increasingly "deaf" to the mechanical stimulus as loading cycles persist uninterrupted, and by allowing a rest period between loading bouts, the osteogenic effectiveness of subsequent cycles can be increased.     

Feasibility and acceptability of a motivational interviewing breastfeeding peer support intervention

An uncontrolled study with process evaluation was conducted in three U.K. community maternity sites to establish the feasibility and acceptability of delivering a novel breastfeeding peer‐support intervention informed by motivational interviewing (MI; Mam‐Kind). Peer‐supporters were trained to deliver the Mam‐Kind intervention that provided intensive one‐to‐one peer‐support, including (a) antenatal contact, (b) face‐to‐face contact within 48 hr of birth, (c) proactive (peer‐supporter led) alternate day contact for 2 weeks after birth, and (d) mother‐led contact for a further 6 weeks. Peer‐supporters completed structured diaries and audio‐recorded face‐to‐face sessions with mothers. Semistructured interviews were conducted with a purposive sample of mothers, health professionals, and all peer‐supporters. Interview data were analysed thematically to assess intervention acceptability. Audio‐recorded peer‐support sessions were assessed for intervention fidelity and the use of MI techniques, using the MITI 4.2 tool. Eight peer‐supporters delivered the Mam‐Kind intervention to 70 mothers in three National Health Service maternity services. Qualitative interviews with mothers (n = 28), peer‐supporters (n = 8), and health professionals (n = 12) indicated that the intervention was acceptable, and health professionals felt it could be integrated with existing services. There was high fidelity to intervention content; 93% of intervention objectives were met during sessions. However, peer‐supporters reported difficulties in adapting from an expert‐by‐experience role to a collaborative role. We have established the feasibility and acceptability of providing breastfeeding peer‐support using a MI‐informed approach. Refinement of the intervention is needed to further develop peer‐supporters' skills in providing mother‐centred support. The refined intervention should be tested for effectiveness in a randomised controlled trial.     

Targeting the LRP5 Pathway Improves Bone Properties in a Mouse Model of Osteogenesis Imperfecta

The cell surface receptor low‐density lipoprotein receptor‐related protein 5 (LRP5) is a key regulator of bone mass and bone strength. Heterozygous missense mutations in LRP5 cause autosomal dominant high bone mass (HBM) in humans by reducing binding to LRP5 by endogenous inhibitors, such as sclerostin (SOST). Mice heterozygous for a knockin allele (Lrp5^p.A214V) that is orthologous to a human HBM‐causing mutation have increased bone mass and strength. Osteogenesis imperfecta (OI) is a skeletal fragility disorder predominantly caused by mutations that affect type I collagen. We tested whether the LRP5 pathway can be used to improve bone properties in animal models of OI. First, we mated Lrp5^+/p.A214V mice to Col1a2^+/p.G610C mice, which model human type IV OI. We found that Col1a2^+/p.G610C;Lrp5^+/p.A214V offspring had significantly increased bone mass and strength compared to Col1a2^+/p.G610C;Lrp5^+/+ littermates. The improved bone properties were not a result of altered mRNA expression of type I collagen or its chaperones, nor were they due to changes in mutant type I collagen secretion. Second, we treated Col1a2^+/p.G610C mice with a monoclonal antibody that inhibits sclerostin activity (Scl‐Ab). We found that antibody‐treated mice had significantly increased bone mass and strength compared to vehicle‐treated littermates. These findings indicate increasing bone formation, even without altering bone collagen composition, may benefit patients with OI. © 2014 American Society for Bone and Mineral Research.     

Osteocytes and mechanical loading: The Wnt connection

Bone adapts to the mechanical forces that it experiences. Orthodontic tooth movement harnesses the cell‐ and tissue‐level properties of mechanotransduction to achieve alignment and reorganization of the dentition. However, the mechanisms of action that permit bone resorption and formation in response to loads placed on the teeth are incompletely elucidated, though several mechanisms have been identified. Wnt/Lrp5 signalling in osteocytes is a key pathway that modulates bone tissue's response to load. Numerous mouse models that harbour knock‐in, knockout and transgenic/overexpression alleles targeting genes related to Wnt signalling point to the necessity of Wnt/Lrp5, and its localization to osteocytes, for proper mechanotransduction in bone. Alveolar bone is rich in osteocytes and is a highly mechanoresponsive tissue in which components of the canonical Wnt signalling cascade have been identified. As Wnt‐based agents become clinically available in the next several years, the major challenge that lies ahead will be to gain a more complete understanding of Wnt biology in alveolar bone so that improved/expedited tooth movement becomes a possibility.     

Sost downregulation and local Wnt signaling are required for the osteogenic response to mechanical loading

Sclerostin, the Wnt signaling antagonist encoded by the Sost gene, is secreted by osteocytes and inhibits bone formation by osteoblasts. Mechanical stimulation reduces sclerostin expression, suggesting that osteocytes might coordinate the osteogenic response to mechanical force by locally unleashing Wnt signaling. To investigate whether sclerostin downregulation is a pre-requisite for load-induced bone formation, we conducted experiments in transgenic mice (TG) engineered to maintain high levels of SOST expression during mechanical loading. This was accomplished by introducing a human SOST transgene driven by the 8 kb fragment of the DMP1 promoter that also provided osteocyte specificity of the transgene. Right ulnae were subjected to in vivo cyclic axial loading at equivalent strains for 1 min/day at 2 Hz; left ulnae served as internal controls. Endogenous murine Sost mRNA expression measured 24 h after 1 loading bout was decreased by about 50% in TG and wild type (WT) littermates. In contrast, human SOST, only expressed in TG mice, remained high after loading. Mice were loaded on 3 consecutive days and bone formation was quantified 16 days after initiation of loading. Periosteal bone formation in control ulnae was similar in WT and TG mice. Loading induced the expected strain-dependent increase in bone formation in WT mice, resulting from increases in both mineralizing surface (MS/BS) and mineral apposition rate (MAR). In contrast, load-induced bone formation was reduced by 70-85% in TG mice, due to lower MS/BS and complete inhibition of MAR. Moreover, Wnt target gene expression induced by loading in WT mice was absent in TG mice. Thus, downregulation of Sost/sclerostin in osteocytes is an obligatory step in the mechanotransduction cascade that activates Wnt signaling and directs osteogenesis to where bone is structurally needed.     

Using postal randomization to replace telephone randomization had no significant effect on recruitment of patients

OBJECTIVE: To test the effect of postal randomization on recruitment of patients into a randomized trial in primary care. STUDY DESIGN AND SETTING: General practices used a telephone service to randomize patients in our trial. Delays in the start of recruitment at some sites led us to modify the randomization procedure. When new practices took part patients completed and posted baseline materials to the Trial Secretary in York who performed the randomization and informed those concerned of the allocation. RESULTS: Of the 647 practices who were invited to take part, 130 (45%) of 288 agreed to participate using telephone randomization and 155 (43%) of 359 using the postal method. These practices recruited 553 patients from November 2002 to October 2004 across 11 sites in the United Kingdom. The postal method reduced the number of patients recruited by a factor of 0.86 (95% confidence interval=0.62-1.20), or 14%. The number of general practitioners working in a practice significantly increased patient recruitment by a factor of 1.12 (1.05-1.20), whereas practice distance from hospital significantly decreased recruitment by a factor of 0.98 (0.97-0.99). CONCLUSION: Postal randomization had no significant effect on recruitment of patients into our trial.     

Bone mass and strength: phenotypic and genetic relationship to alcohol preference in P/NP and HAD/LAD rats

BACKGROUND: The association between moderate alcohol intake and elevated bone mineral density observed in several epidemiologic studies might result from common genetic pathway regulating both phenotypes. In this study, we determined whether there is a relationship between alcohol preference and high bone mass or strength and whether bone mass-regulating genes segregate during selective breeding of alcohol preferring rats. METHODS: Six different lines of male rats with high or low preference for alcohol consumption were used in this study. The high alcohol preference lines are alcohol-preferring (P), high-alcohol-drinking 1 (HAD1), and high-alcohol-drinking 2 (HAD2), and their corresponding low alcohol preference lines are alcohol-nonpreferring (NP), low-alcohol-drinking 1 (LAD1), and low-alcohol-drinking 2 (LAD2). Bone mass phenotypes were determined using dual energy x-ray absorptiometry (DXA), peripheral quantitative computed tomography (pQCT), and biomechanics in long bones and lumbar vertebrae from rats at 3 and 6 months of age. RESULTS: P rats had significantly higher bone mass and strength compared with NP rats, mainly due to higher cortical bone in long bones and lumbar vertebrae. HAD2 rats also had significantly higher bone mass compared with LAD2 rats, but mostly due to increased trabecular bone leading to increased strength only in lumbar vertebra. Conversely, HAD1 rats had significantly lower bone mass and strength compared with LAD1 rats in long bones. The vertebral bone mass and strength did not differ between HAD1 and LAD1 rats. CONCLUSIONS: This study demonstrated that preference for alcohol consumption had no consistent relationship with high bone mass or strength, as each alcohol-preferring rat line had their unique bone mass phenotypes. However, genes regulating bone mass and strength appear to segregate with alcohol preference genes in P and HAD rat lines, suggesting that alcohol preferring rat lines may be useful for identifying genes that regulate bone mass and structure.