Radiation doses deriving from patients undergoing 111In-DTPA-d-Phe-1-octreotide scintigraphy

The purpose of this study was to estimate the radiation doses to nursing staff, other patients, accompanying persons and family members deriving from patients undergoing ¹¹¹In-DTPA-d-Phe-1-octreotide (¹¹¹In-OCT) scintigraphy. Dose rates were measured from 16 patients who had received an intravenous injection of 140±40 MBq ¹¹¹In-OCT. The measurements were performed at three different distances (0.5, 1 and 2 m) at 10–20 min, 5–7 h and 24 h (and in some cases, up to 48 h) after administration of ¹¹¹In-OCT. The effective half-lives of the biexponential decrease of the dose rates were estimated to be 2.94±0.27 h (T ₁) and 65.17±0.58 h (T ₂). The calculated maximum dose to other persons in the waiting area was 27.2 μSv, to family members 61.5 μSv, to nursing staff in a ward 24.1 μSv and to neighbouring patients in the ward 69.5 μSv. Our results clearly demonstrate that the calculated maximum radiation exposure to accompanying persons, personnel, family members and other patients is well below the maximum annual dose limit for non-professionally exposed persons. Received 20 May and in revised form 9 July 1997     

荧光原位杂交技术分析人结肠菌群方法研究

建立荧光原位杂交技术分析人体内结肠菌群的方法。取受试者新鲜粪便 ,选用 5种特异性的 16SrRNA寡核苷酸探针 ,检测粪便样本收集后的保存时间、温度 ,离心条件及样本固定液存放时间对杂交计数结果的影响。结果建立最佳实验条件为 :粪便样本收集后应尽快在 4℃下保存 ,放置时间不要超过 12小时即作处理 ;样本的适宜离心条件为 70 0g 2分钟 ;样本用多聚甲醛固定后在 - 80℃下存放时间不要超过 5个月。该方法具有较好的稳定性 ,可以有效地检出个体之间结肠菌群的差异。     

Binding potency of paroxetine analogues for the 5-hydroxytryptamine uptake complex.

The in-vitro inhibition constants (Ki) of 14 structural analogues of the potent 5-hydroxytryptamine (5-HT)-uptake inhibitor paroxetine were determined to assess the structure-affinity relationship of these derivatives. A goal of these studies was to determine those positions on paroxetine which could be derivatized without significantly decreasing the affinity of the drug for the binding site, so that radiolabels such as [18F]fluoroalkyl groups might be appended for future in-vivo imaging studies of the 5-HT uptake system. Using the methyl moiety as a steric probe for these studies, it was found that the rank order of potency of various methyl-substituted paroxetine analogues for inhibiting the binding of [3H]paroxetine to the 5-HT re-uptake site was: 4'-approximately equal to 3'-approximately equal to 2'- > 2'-approximately equal to 1- > 5'- > 6'-methyl. The in-vitro equipotent molar ratios (EPMR, Ki(analogue)/Ki(paroxetine)) of the analogues were determined, and the EPMRs of the 4'-, 3'-, and 2'-methyl derivatives were 1.9, 2.2 and 2.2, respectively. The 4'- and 2'-fluoromethyl and -fluoroethyl analogues were synthesized, and the EPMRs of the 4'- and 2'-fluoromethyl derivatives were determined to be 2.0 and 3.5, and those of the 4'- and 2'-fluoroethyl analogues were 5.2 and 6.2, respectively. The 2'-fluoromethyl analogue was unstable in aqueous solutions, and it is not a promising ligand for in-vivo studies.(ABSTRACT TRUNCATED AT 250 WORDS)     

Cora Rotary Pump for Implantable Left Ventricular Assist Device: Biomaterial Aspects

Abstract: Our group is developing a left ventricular assist device based on the principle of the Maillard-Wankel rotative compressor: it is a rotary, not centrifugal, pump that produces a pulsatile flow. Stringent requirements have been defined for construction materials. They must be light, yet sufficiently hard and rigid, and able to be machined with high precision. The friction coefficient must be low and the wear resistance high. The materials must be chemically inert and not deformable. Also, the materials must be biocompatible, and the blood contacting surface must be hemocompatible. We assessed the materials in terms of physiochemistry, mechanics, and tribology to select the best for hemocompatibility (determined by studies of protein adsorption: platelet, leukocyte, and red cell retention: and hemolysis, among other measurements) and biocompatibility (determined by measurement of complement activation and toxicity, among other criteria). Of the materials tested, for short- and middle-term assistance, we chose titanium alloy (Ti₆AI₄V) and alumina ceramic (Al₂O₃) and for long-term and permanent use, composite materials (TiN coating on graphite). We saw that the polishing process of the substrate must be improved. For the future, the best coating material would be diamond-like carbon (DLC) or crystalline diamond coating.