Effect of workload setting on propulsion technique in handrim wheelchair propulsion

ObjectiveTo investigate the influence of workload setting (speed at constant power, method to impose power) on the propulsion technique (i.e. force and timing characteristics) in handrim wheelchair propulsion.MethodTwelve able-bodied men participated in this study. External forces were measured during handrim wheelchair propulsion on a motor driven treadmill at different velocities and constant power output (to test the forced effect of speed) and at power outputs imposed by incline vs. pulley system (to test the effect of method to impose power). Outcome measures were the force and timing variables of the propulsion technique.ResultsFEF and timing variables showed significant differences between the speed conditions when propelling at the same power output (p < 0.01). Push time was reduced while push angle increased. The method to impose power only showed slight differences in the timing variables, however not in the force variables.ConclusionsResearchers and clinicians must be aware of testing and evaluation conditions that may differently affect propulsion technique parameters despite an overall constant power output.     

Availability and need of home adaptations for personal mobility among individuals with spinal cord injury

Objective: To identify the availability and unmet need of home adaptations (HAs) among the Swiss population with spinal cord injury (SCI).

Design: Cross-sectional study.

Setting: Swiss Spinal Cord Injury Community Survey 2012.

Participants: Individuals aged 16 or older with chronic SCI living in Switzerland.

Interventions: Not applicable.

Outcome measures: The availability of ten HAs (self-report) was analyzed by sex, age, living situation, indoor mobility, SCI severity, SCI etiology and time since SCI. The unmet need (self-report of not having a HA but needing it) of HAs was analyzed by financial hardship.

Results: Among the 482 study participants (mean age 55.2 years, standard deviation 15.0 years, 71.6% males), 85.1% had at least one HA. The most frequent HA was a wheelchair accessible shower (62.7%). Availability of HAs markedly varied with indoor mobility (e.g. 38.4% of participants using a wheelchair had a stair lift compared to 17.4% of those walking) and with SCI severity (e.g. 54.8% of those with complete paraplegia had a wheelchair accessible kitchen worktop compared to 26.0% of those with incomplete paraplegia). Unmet need was highest for adjustable kitchen worktops (78.7% of those with a need) and adjustable kitchen cabinets (75.7%) and lowest for wheelchair accessible showers (9.4%) and grab bars next to the toilet (8.5%). No significant differences in unmet need were found when stratifying for financial hardship.

Conclusion: Availability of HAs is dependent on indoor mobility and SCI severity. There is a considerable degree of unmet need for selected HAs, which couldn't be explained by financial hardship.     

Continuous cardiac output measurement by un-calibrated pulse wave analysis and pulmonary artery catheter in patients with septic shock

Septic shock is a serious medical condition. With increased concerns about invasive techniques, a number of non-invasive and semi-invasive devices measuring cardiac output (CO) have become commercially available. The aim of the present study was to determine the accuracy, precision and trending abilities of the FloTrac and the continuous pulmonary artery catheter thermodilution technique determining CO in septic shock patients. Consecutive septic shock patients were included in two centres and CO was measured every 4 h up to 48 h by FloTrac (APCO) and by pulmonary artery catheter (PAC) using the continuous (CCO) and intermittent (ICO) technique. Forty-seven septic shock patients with 326 matched sets of APCO, CCO and ICO data were available for analysis. Bland and Altman analysis revealed a mean bias ±2 SD of 0.0 ± 2.14 L min^?1 for APCO–ICO (%error = 34.5 %) and 0.23 ± 2.55 L min^?1 for CCO–ICO (%error = 40.4 %). Trend analysis showed a concordance of 85 and 81 % for APCO and CCO, respectively. In contrast to CCO, APCO was influenced by systemic vascular resistance and by mean arterial pressure. In septic shock patients, APCO measurements assessed by FloTrac but also the established CCO measurements using the PAC did not meet the currently accepted statistical criteria indicating acceptable clinical performance.     

Synthesis and evaluation of a C-6 alkylated pyrimidine derivative for the in vivo imaging of HSV1-TK gene expression

IntroductionWe report on the synthesis, radiolabeling, in vitro and in vivo characterization of N-Me-[¹⁸F]FHBT (6-(3-[¹⁸F]fluoro-2-(hydroxymethyl)propyl)-1,5-dimethylpyrimidin-2,4(1H,3H)-dione), a C-6-substituted N-1-methylated pyrimidine derivative as a reporter probe for imaging herpes simplex virus type 1 thymidine kinase (HSV1-TK) expression.MethodsN-Me-[¹⁸F]FHBT was synthesized via a standard nucleophilic substitution reaction followed by acidic cleavage of the methoxytrityl protecting group. Cell uptake was studied in vitro with control HEK293 (human embryonic kidney cells) and HEK293 cells stably transfected with nonmutant HSV1-tk (HEK293TK+ cells). Positron emission tomography (PET) imaging and biodistribution studies of N-Me-[¹⁸F]FHBT or [¹⁸F]FHBG were performed in nude mice bearing xenografts of HEK293 control and TK+ cells.ResultsN-Me-[¹⁸F]FHBT was obtained in a two-step reaction in an overall maximal radiochemical yield (decay-corrected) of 5% and a radiochemical purity >96%. The tracer uptake in HSV1-TK containing HEK293TK+ cells was 14.5 times (at 30 min) and 55.4 times (at 240 min) higher than in control HEK293 cells. In mice, N-Me-[¹⁸F]FHBT and [¹⁸F]FHBG accumulated significantly and exhibited similar radioactivity levels in the HEK293TK+ xenografts; however, standardized uptake values ratios between HEK293TK+ and HEK293 control xenografts were higher for [¹⁸F]FHBG than for N-Me-[¹⁸F]FHBT. Both tracers showed high gall bladder and abdominal activity.ConclusionThe biological evaluations demonstrated the feasibility of using N-methylated C-6-substituted pyrimidine derivative N-Me-[¹⁸F]FHBT as a PET radiotracer for monitoring HSV1-TK expression in vivo.     

Mucosal immune responses to meningococcal C polysaccharide-protein conjugate in mice

Mucosal delivery of vaccines represents an attractive approach because this is a region of first contact point for inhaled antigens. We have obtained a meningococcal group C polysaccharide-tetanus toxoid conjugate (MGCP-TT) and evaluated it for intranasal route in mice. The conjugate was obtained by a developed method in our laboratory. The specific IgA in saliva and specific IgA and IgG in serum were measured by ELISA methods and bactericidal antibodies in sera against a meningococcal group C strain were measured. The conjugated elicited a significant increase in anti-MGCP salivary IgA and serum IgG and bactericidal antibodies concentrations, while specific serum IgA was not observed. These results indicated that after conjugation, there was a change in the responses for MGCP from thymus-independent to thymus-dependent and that it was effective by intranasal route.     

Pilot study on the comprehensive economic costs of major trauma: Consequential costs are well in excess of medical costs

BACKGROUND: Trauma care is expensive. However, reliable data on the exact lifelong costs incurred by a major trauma patient are lacking. Discussion usually focuses on direct medical costs--underestimating consequential costs resulting from absence from work and permanent disability. METHODS: Direct medical costs and consequential costs of 63 major trauma survivors (ISS >13) at a Swiss trauma center from 1995 to 1996 were assessed 5 years posttrauma. The following cost evaluation methods were used: correction cost method (direct cost of restoring an original state), human capital method (indirect cost of lost productivity), contingent valuation method (human cost as the lost quality of life), and macroeconomic estimates. RESULTS: Mean ISS (Injury Severity Score) was 26.8 +/- 9.5 (mean +/- SD). In all, 22 patients (35%) were disabled, causing discounted average lifelong total costs of USD 1,293,800, compared with 41 patients (65%) who recovered without any disabilities with incurred costs of USD 147,200 (average of both groups USD 547,800). Two thirds of these costs were attributable to a loss of production whereas only one third was a result of the cost of correction. Primary hospital treatment (USD 27,800 +/- 37,800) was only a minor fraction of the total cost--less than the estimated cost of police and the judiciary. Loss of quality of life led to considerable intangible human costs similar to real costs. CONCLUSIONS: Trauma costs are commonly underestimated. Direct medical costs make up only a small part of the total costs. Consequential costs, such as lost productivity, are well in excess of the usual medical costs. Mere cost averages give a false estimate of the costs incurred by patients with/without disabilities.     

Shoulder load during handcycling at different incline and speed conditions

Background

The manual wheelchair user population experiences a high prevalence of upper-limb injuries, which are related to a high load on the shoulder joint during activities of daily living, such as handrim wheelchair propulsion. An alternative mode of propulsion is handcycling, where lower external forces are suggested to be applied to reach the same power output as in handrim wheelchair propulsion. This study aimed to quantify glenohumeral contact forces and muscle forces during handcycling and compare them to previous results of handrim wheelchair propulsion.

Methods

Ten able-bodied men propelled the handbike on a treadmill at two inclines (1% and 4% with a velocity of 1.66 m/s) and two speed conditions (1.39 and 1.94 m/s with fixed power output). Three-dimensional kinematics and kinetics were obtained and used as input for a musculoskeletal model of the arm and shoulder. Output variables were glenohumeral contact forces and forces of important shoulder muscles.

Findings

The highest mean and peak glenohumeral contact forces occurred at 4% incline (420 N, 890 N respectively). The scapular part of the deltoideus, the triceps and the trapezius produced the highest force.

Interpretation

Due to the circular movement and the continuous force application during handcycling, the glenohumeral contact forces, as well as the muscle forces were clearly lower compared to the results in the existing literature on wheelchair propulsion. These findings prove the assumption that handcycling is mechanically less straining than handrim wheelchair propulsion, which may help preventing overuse to the shoulder complex.