Localized osteolysis in stable, non-septic total hip replacement

We are reporting four cases of extensive, localized bone resorption adjacent to a rigidly anchored, cemented total hip replacement. None of these hips showed evidence of infection on clinical, bacteriological, or pathological evaluation. The tissue from the regions of osteolysis showed sheets of macrophages and foreign-body giant cells invading the femoral cortices. Abundant methylmethacrylate particulate debris was present in the tissues, but polyethylene wear debris was absent. The histological appearance of this tissue resembled that reported about loosened total hip implants with the exception of the synovial-like layer at the cement surface. The cases reported here show that aggressive bone lysis may occur around stable cemented total hip arthroplasties without the presence of sepsis or malignant disease.     

Third-body wear testing of a highly cross-linked acetabular liner: the effect of large femoral head size in the presence of particulate poly(methyl-methacrylate) debris

The hip simulator wear performance of an electron beam cross-linked and subsequently melted ultrahigh molecular weight polyethylene against femoral heads of 28-, 38-, and 46-mm diameter in the presence of poly(methyl-methacrylate) particulate debris was contrasted with that of conventional polyethylene against a 46-mm diameter head. Over 5 million cycles of testing, the average wear rate of the conventional polyethylene liners was 29.3 +/- 3.0 mg per million cycles. All highly cross-linked components exhibited marked reduction in wear, with the highest wear measuring 0.74 +/- 0.85 mg per million cycles. This study, using a clinically relevant third-body material, showed the electron beam cross-linked material to be far more resistant to this third-body wear than conventional ultrahigh molecular weight polyethylene, even when very large diameter femoral heads were used.     

N-myc modulates expression of p73 in neuroblastoma

The human p73 gene is a homolog of p53, which has been localized to chromosome 1p36 in a region that is frequently deleted in neuroblastoma. Transfection of the p73 gene into neuroblastoma cells that lack detectable p73 protein has been shown to result in growth suppression and to induce neuronal differentiation. In this study, we have identified by means of restriction landmark genome scanning (RLGS) a genomic fragment that was frequently reduced in intensity in neuroblastomas. The cloned fragment contained exon 1 of p73 as well as intronic and promoter sequences. We investigated the genomic and expression status of p73 and N-myc in 34 neuroblastoma tumors and 12 neuroblastoma cell lines. Approximately a third of neuroblastomas in our series exhibited deletion of p73. Most tumors analyzed exhibited reduced expression of p73, as determined by quantitative RT-PCR, in the absence of detectable p73 gene deletion. The reduced expression of p73 correlated with overexpression of N-myc in a statistically significant manner. The N-myc gene was transfected into two neuroblastoma cell lines that lacked N-myc amplification to determine its effect on p73 RNA levels. p73 was detectable at low level by RT-PCR in untransfected SK-N-AS cells and became undetectable following N-myc transfection, whereas in SH-EP1 cells, p73 levels were substantially reduced following transfection but remained detectable. Our data suggest that the N-myc gene modulates expression of p73, allowing neuroblastoma cells to escape the growth suppressing properties of p73.     

Quantification of implant micromotion, strain shielding, and bone resorption with porous-coated anatomic medullary locking femoral prostheses.

Fourteen femora containing porous-coated anatomic medullary locking (AML) femoral prostheses were retrieved from 12 patients at autopsy. Clinical roentgenograms in 13 femora showed bone remodeling changes, indicating that the implants were fixed by osseointegration. Under simulated physiologic loading, micromotion between the implant and the bone was measured using electrical displacement transducers connected to the implant and to the adjacent cortex. The micromotion between the implants at the areas of porous coating and the adjacent cortex in the one case of failed bone ingrowth measured 150 microns. Maximum relative motion between the cortex and the implant in the areas of porous coating for the 13 cases showing signs of bone ingrowth was 40 microns, and this was completely elastic relative displacement. With all implants, the micromotion between the cortex and the stem was always greatest over the uncoated portion of the stem. Four of the implants were proximally porous coated. With these, the micromotion was greater over the uncoated areas than with more extensively coated stems and was always greatest at the uncoated tip of the prosthesis. The amount of micromotion was directly related to the extent of porous coating on the implant. Maximum tip motion for the proximally coated implants was 210 micra, whereas for the fully porous-coated implants, it was 40 microns. In nine of the autopsies, the contralateral normal femur was obtained in addition to the femur containing the AML (the in vivo remodeled femur). These were used for comparative studies of strain shielding and femoral remodeling. Cortical strains were measured in the in vivo remodeled femora and were compared with measurements made in the contralateral normal femora before and following implantation of a stem identical to that present on the clinically treated side. The data showed major strain reductions in all the postmortem implanted normal femora. Comparison of the strain data from the postmortem implanted normal femora with those from the in vivo remodeled femora clearly indicated that extensive bone remodeling did not result in restoration of cortical strain levels anywhere near normal. Strain shielding continued to exist in all of the remodeled specimens, even up to 7.5 years after surgery. This strain shielding was associated with bone remodeling changes that resulted in regional reductions in bone mineral content that ranged from 7% to 78%. These observations are unique, important, and valuable in defining the in vivo function and clinical behavior of this type of porous-coated femoral component.     

Morphology of tumours induced in hamsters by CELO virus, tumour tissue, and tumour cells grown in culture

Tumours in hamsters, induced by the chicken-embryo-lethal-orphan (CELO) virus, by tumour tissue transplants, or by tumour cells grown in culture, were well circumscribed solid tumours and covered by a thin capsule-like structure. All were fibrosarcomata. However, tumours produced by the 3 inocula exhibited the following histological differences. Neoplasms induced by CELO virus were generally less differentiated and were composed of cells with polygonal or oval nuclei and indistinct cytoplasmic boundaries. Numerous multinucleated bizarre giant cells were found. Those produced by tumour tissue transplants were more differentiated and were composed of spindle shaped cells with abundant collagen fibre formation. Neoplasms induced by tumour cells grown in culture were generally undifferentiated with many mitotic figures and contained numerous giant cells.     

Effect of radiation, heat, and aging on in vitro wear resistance of polyethylene

Radiation cross-linking increases the wear resistance of polyethylene used in total hip replacement. Radiation also generates residual free radicals, which are detrimental to long-term properties of polyethylene. Two approaches are used to stabilize the residual free radicals and terminally sterilize the components. One is postirradiation annealing with gas sterilization and the other is postirradiation melting with gamma sterilization in nitrogen. The hypothesis of the current study is that postirradiation annealing followed by gamma sterilization in nitrogen will result in more free radicals in polyethylene than gamma sterilization either in air or in nitrogen alone. To test this hypothesis, concentration of residual free radicals was quantified in polyethylene that was annealed and gamma sterilized in nitrogen and control polyethylenes gamma sterilized in air versus in nitrogen. Three crosslinked polyethylenes that were melted and gas sterilized also were included in the study. The effects of residual free radicals were studied by accelerated aging. Oxidation levels and weight loss in bidirectional pin-on-disk tests were determined before and after aging. Polyethylene that was subjected to postirradiation annealing and gamma sterilization resulted in 58% more residual free radicals than control polyethylenes. Weight loss of the annealed polyethylene increased by 16-fold on accelerated aging and had three times higher oxidation levels than that measured in control polyethylenes after aging. In contrast, polyethylenes that were stabilized with postirradiation melting and terminally gas sterilized showed no detectable residual free radicals. Accelerated aging did not affect the weight loss and oxidation levels of melted polyethylenes.     

Bcl-2 and M-Myc coexpression increases IGF-IR and features of malignant growth in neuroblastoma cell lines

The bcl-2 and c-myc oncogenes cooperate to transform multiple cell types. In the pediatric malignancy NB(2), Bcl-2 is highly expressed. In tumors with a poor prognosis, N-Myc, a protein homologous to c-Myc, is overexpressed as a result of gene amplification. The present study was designed to determine whether Bcl-2 cooperates with N-Myc to bestow a tumorigenic phenotype to neuroblastoma (NB) cells. NB cell lines that at baseline express neither Bcl-2 nor N-Myc were stably transfected to express these gene products. In this model, we found Bcl-2 rescues N-Myc-expressing cells from apoptosis induced by serum withdrawal. Coexpression of Bcl-2 and N-Myc supports growth in low serum conditions and anchorage-independent growth in soft agar. Similarly, in vivo tumorigenic and angiogenic activity was dependent on coexpression. Our data further suggests that the mechanism underlying these changes involves the receptor for insulin growth factor type I (IGF-IR).     

The initiation of failure in cemented femoral components of hip arthroplasties

We studied 16 femora retrieved at post-mortem from symptomless patients who had a satisfactory cemented total hip arthroplasty from two weeks to 17 years earlier, with the aim of delineating the initial mechanisms involved in loosening. Only one specimen showed radiographic evidence of loosening; the other 15 were stable to mechanical testing at 17.0 Nm of torque. In all 16 specimens, the cement-bone interface was intact with little fibrous tissue formation. By contrast, separation at the cement-prosthesis interface and fractures in the cement mantle were frequent. The most common early feature was debonding of the cement from the metal, seen at the proximal and distal ends of the prosthesis. Specimens which had been in place for longer also showed circumferential fractures in the cement, near the cement-metal interface, and radial fractures extending from this interface into the cement and sometimes to the bony interface. The most extensive cement fractures appeared to have started at or near sharp corners in the metal, or where the cement mantle was thin or incomplete. Fractures were also related to voids in the cement. The time relationship in this series suggested that long-term failure of the fixation of cemented femoral components was primarily mechanical, starting with debonding at the interface between the cement and the prosthesis, and continuing as slowly developing fractures in the cement mantle.     

The effect of centrifuging bone cement

We have tested the porosity and fatigue life of five commonly used bone cements: Simplex P, LVC, Zimmer regular, CMW and Palacos R. Tests were conducted with and without centrifugation and with the monomer at room temperature and, except for LVC, at 0 degrees C. We found that the fatigue life of different specimens varied by a factor of nearly 100. It did not depend on porosity alone, but was more influenced by the basic composition of the cement. Simplex P when mixed with monomer at 0 degrees C and centrifuged for 60 seconds had the highest fatigue life and was still sufficiently liquid to use easily.     

Total hip replacement in the congenitally dysplastic hip

Total hip replacement arthroplasty can relieve pain and improve function for many patients with end-stage arthritis.Patients with congenital hip dysplasia, however, present special problems because of the deformities of the acetabulum and femur.Noncemented porous-coated hemispheric acetabular components available in small sizes, and small, straight-stemmed, cemented, femoral components can be used to deal with the bony deformities and have considerably expanded the success of total hip replacement in such patients.The acetabular dysplasia can be managed in most cases by reaming to the medial wall, inserting small-diameter, porous-coated, acetabular components and stabilizing them with screws to provide rigid initial stability. Small portions of the components can be covered with bone graft chips. If necessary, the acetabular component can be placed more proximal than normal, thus increasing the height of the prosthetic hip center, while restoring the limb length with a longer neck prosthesis. a high total dislocation without the development of an adequate false acetabulum, however, requires trochanteric osteotomy, femoral shortening, placement of the acetabular component in the true acetabulum, and the use of straight-stem femoral components.