Mechanical trauma as the major cause of troponin T release after transvenous implantation of cardioverter/defibrillators

To study the cause of myocardial injury after elective transvenous insertion of a cardioverter/defibrillator, we measured troponin T (TnT) release in 27 patients. Five patients needing only replacement of the generator with threshold testing served as controls. Compared to the control group, a significant increase in TnT occurred in the patients undergoing insertion, which was greatest in the group receiving screw-in electrodes. There was no correlation between TnT and the number and energy of the shocks and the time in fibrillation. Duration of surgery and TnT release were positively associated. Cardiac injury therefore mainly results from mechanical trauma during insertion of the electrodes and only to a lesser degree from electrical and ischemic lesions.     

Factors influencing transcutaneous oxygen and carbon dioxide measurements in adult intensive care patients

Transcutaneous PO2 (PtcO2) is suggested to reflect tissue oxygenation in intensive care patients, whereas transcutaneous PCO2 (PtcCO2) is advocated as a noninvasive method for assessing PaCO2. In 24 critically ill adult patients (mean Apache II score 14.2, SD 4.7) we investigated the impact of variables that are commonly thought to determine PtcO2 and PtcCO2 measurements. A linear correlation was found between PtcO2 and PaO2 (r = 0.6; p less than or equal to 0.0001) and between PtcO2 and mean arterial blood pressure (MAP; r = 0.42; p less than or equal to 0.003). Cardiac index (CI) correlated with tc-index (PtcO2/PaO2; r = 0.31; p less than or equal to 0.03). There was no relationship between PtcO2 and hemoglobin concentration (Hb) and the position of the oxygen dissociation curve (ODC). Stepwise multiple regression analysis demonstrated a significant influence of PaO2 and MAP on PtcO2. The contribution of CI, Hb and the ODC was not significant. Only 40% of the variability of a single PtcO2 measurement could be explained by PaO2 and MAP. A significant linear correlation was demonstrated between PtcCO2 and PaCO2 (r = 0.76; p less than or equal to 0.0001) but not between PtcCO2 and CI, MAP and arterial base excess (BEa). Stepwise multiple regression analysis revealed an influence of PaCO2 and of CI on PtcCO2; 66% of the variability of a single PtcCO2-value could be explained by PaCO2 and CI. Our data demonstrate that transcutaneous derived gas tensions result from complex interaction between hemodynamic, respiratory and local factors, which can hardly be defined in ICU-patients.     

Efficacy of Two Methods for Reducing Postbypass Afterdrop

Background: Afterdrop, defined as the precipitous reduction in core temperature after cardiopulmonary bypass, results from redistribution of body heat to inadequately warmed peripheral tissues. The authors tested two methods of ameliorating afterdrop: (1) forced-air warming of peripheral tissues and (2) nitroprusside-induced vasodilation.

Methods: Patients were cooled during cardiopulmonary bypass to approximately 32[degrees]C and subsequently rewarmed to a nasopharyngeal temperature near 37[degrees]C and a rectal temperature near 36[degrees]C. Patients in the forced-air protocol (n = 20) were assigned randomly to forced-air warming or passive insulation on the legs. Active heating started with rewarming while undergoing bypass and was continued for the remainder of surgery. Patients in the nitroprusside protocol (n = 30) were assigned randomly to either a control group or sodium nitroprusside administration. Pump flow during rewarming was maintained at 2.5 l [middle dot] m-2 [middle dot] min-1 in the control patients and at 3.0 l [middle dot] m-2 [middle dot] min-1 in those assigned to sodium nitroprusside. Sodium nitroprusside was titrated to maintain a mean arterial pressure near 60 mmHg. In all cases, a nasopharyngeal probe evaluated core (trunk and head) temperature and heat content. Peripheral compartment (arm and leg) temperature and heat content were estimated using fourth-order regressions and integration over volume from 18 intramuscular needle thermocouples, nine skin temperatures, and "deep" hand and foot temperature.

Results: In patients warmed with forced air, peripheral tissue temperature was higher at the end of warming and remained higher until the end of surgery. The core temperature afterdrop was reduced from 1.2 +/- 0.2[degrees]C to 0.5 +/- 0.2[degrees]C by forced-air warming. The duration of afterdrop also was reduced, from 50 +/- 11 to 27 +/- 14 min. In the nitroprusside group, a rectal temperature of 36[degrees]C was reached after 30 +/- 7 min of rewarming. This was only slightly faster than the 40 +/- 13 min necessary in the control group. The afterdrop was 0.8 +/- 0.3[degrees]C with nitroprusside and lasted 34 +/- 10 min which was similar to the 1.1 +/- 0.3[degrees]C afterdrop that lasted 44 +/- 13 min in the control group.     

Weaning of rotary blood pump recipients after myocardial recovery: a computer study of changes in cardiac energetics

BACKGROUND: Weaning of patients from mechanical cardiac support after myocardial recovery has always involved multiple, interacting factors, particularly the training of the myocardium during reduction of pump flow. Rotary pumps offer training advantages when support flow is reduced, even to nearly zero. We report a computer analysis that evaluates the work required of the heart during partial unloading and removal of rotary pumps. METHODS AND RESULTS: A computer model of the assisted circulation, previously implemented in MATLAB (The MathWorks Inc, Natick, Mass), has been augmented with a model of the MicroMed DeBakey ventricular assist device (MicroMed Technology, Inc, Houston, Tex). Flow, pressure patterns, and external work (pressure-volume area, calculated as the area of the ventricular pressure-volume loop [external work] plus potential energy) were calculated for nonassisted and various continuously assisted patients. Under low-flow conditions, the heart imposes an oscillating forward-backward flow through the non-occlusive rotary pump, causing an increase in ventricular work. Thus, an assist flow of 1 to 1.5 L/min requires work equivalent to that of the unsupported heart. At 60% contractility, the nonassisted pressure-volume area is 1.10 Ws/beat, and the potential energy is 0.38 Ws/beat. At a Qpump of 1 L/min, the pressure-volume area is 1.21 Ws/beat, and the potential energy is 0.37 Ws/beat. At a Qpump of 3 L/min, the pressure-volume area is 0.93 Ws/beat, and the potential energy is 0.29 Ws/beat. These conditions cannot be achieved with pulsatile systems. CONCLUSION: During weaning and retraining, an implanted rotary pump can provide a workload to the heart like that in the nonassisted situation, thus increasing the predictability of weaning and reducing the risk of reiterating heart failure.     

Pulsatility does not change cerebral oxygenation during cardiopulmonary bypass

BACKGROUND: To determine the effect of pulsatility during cardiopulmonary bypass (CPB) on cerebral oxygenation, we measured oxyhaemoglobin (HbO2), deoxyhaemoglobin (Hb) and oxidised cytochrome aa3 (CtO2) with near-infrared spectroscopy (NIRS) in 14 patients electively scheduled for cardiac surgery. METHODS: Cerebral oxygenation was measured during steady state CPB at a core temperature of 32 degrees C. Non-pulsatile flow and pulsatile flow were performed for 10 min each. RESULTS: After 14 min of CPB, HbO2, Hb and CtO2 were significantly below prebypass values. HbO2 and CtO2 did not alter with changing flow patterns. Hb significantly increased both during the period of nonpulsatile (median: -0.7 vs. 0.25 micromol/l; P<0.05) and pulsatile flow (median: 0.25 vs. 0.5 micromol/l; P<0.001). This increase was independent of flow pattern. CONCLUSIONS: Neither oxygenated haemoglobin, nor intracellular oxygenation, represented by CtO2, indicated a beneficial effect of pulsatile perfusion during hypothermic CPB. These results, however, are only valid for short time effects within 10 min before rewarming from CPB and patients without flow-limiting stenoses of the carotid artery.     

Mucosal tissue oxygenation of the porcine jejunum during normothermic cardiopulmonary bypass

Cardiopulmonary bypass (CPB) has been associated with intestinal tissue hypoxia, but direct measurements of mucosal oxygenation have not been performed. In anaesthetized pigs, jejunal mucosal oxygen tension and microvascular haemoglobin oxygen saturation were measured by a Clark- type electrode and tissue reflectance spectrophotometry. In pigs, normothermic CPB with systemic oxygen transport equivalent to baseline values was performed. In control animals, mucosal oxygen tension and mucosal haemoglobin oxygen saturation were mean 5.01 (SD 1.08) kPa and 38.0 (2.3)%, respectively. CPB was associated with a decrease in mucosal oxygen tension to 2.26 (1.21) kPa, decrease in mucosal microvascular haemoglobin oxygen saturation to 26.0 (3.9)% and appearance of oscillations in mucosal microvascular haemoglobin oxygen saturation. With CPB, arterial lactate concentrations increased from 1.77 (1.37) to 3.52 (1.58) mmol litre-1, but transvisceral lactate and splanchnic venous-arterial carbon dioxide tension gradients remained unchanged. Our results support the concept that CPB is associated with diminished oxygenation of intestinal mucosa that is probably caused by regional redistribution.      

Centrifugal Pumps as Left Ventricular Assist for Coronary Revascularization on a Beating Heart

During recent years, coronary bypass surgery has progressed toward minimizing invasiveness. One important feature of this approach is performing surgery on a beating heart. During the crucial phase of such surgery, the mechanical support of the heart with a left ventricular assist device (LVAD) is a possible option. During the period from October 1, 1994 until June 30, 1997, we employed a centrifugal pump system in 118 cases of coronary artery bypass graft (CABG) procedures with LVAD support (mechanically supported CABG [SUPPCAB]). A total of 179 distal anastomoses with an average of 1.5 ± 0.5 coronary anastomoses per patient was performed. Three types of pumps were used: 23 BioPump, 87 Isoflow, and 8 Capiox systems. The median time on mechanical support was 44 min (range, 16–116 min). The mean flow rate during support time was 3.5 ± 0.8 L/min, which results in a calculated flow of 1.7 ± 0.6 L/min/m² body surface area (BSA). The average flow was 3.2 ± 0.8 L/min with the BioPump and 3.7 ± 0.8 L/min with the Isoflow pump, respectively (p < 0.01). The mean arterial pressure during mechanical support was 75 ± 12 mm Hg. In 2 patients, the pump system was kept running postoperatively in the ICU. Eight of the patients received operations under resuscitation or in cardiogenic shock. Nine (7.9%) of the patients did not survive the early postoperative phase. For coronary revascularization of the anterolateral and diaphragmatic parts of the heart, the SUPPCAB procedure is feasible with excellent mechanical support of the heart by centrifugal pumps. Especially in high risk cases, this procedure can be recommended.