The technological imperative in tuberculosis care and prevention in Vietnam

ABSTRACT

A monocausal bacteriological understanding of infectious disease orients tuberculosis control efforts towards antimicrobial interventions. A bias towards technological solutions can leave multistranded public health and social interventions largely neglected. In the context of globalising biomedical approaches to infectious disease control, this ethnography-inspired review article reflects upon the implementation of rapid diagnostic technology in low- and middle-income countries. Fieldwork observations in Vietnam provided a stimulus for a critical review of the global rollout of tuberculosis diagnostic technology. To address local needs in tuberculosis control, health managers in resource-poor settings are readily cooperating with international donors to deploy novel diagnostic technologies throughout national tuberculosis programme facilities. Increasing investment in new diagnostic technologies is predicated on the supposition that these interventions will ameliorate disease outcomes. However, suboptimal treatment control persists even when accurate diagnostic technologies are available, suggesting that promotion of singular technological solutions can distract from addressing systemic change, without which disease susceptibility, propagation of infection, detection gaps, diagnostic delays, and treatment shortfalls persist.     

Revascularized fibula for tibia replacement in adamantinoma

Adamantinoma of long bones is one of the rarest of malignant bone tumors; it is commonly located in the middle or lower third of the diaphysis of the tibia. A case with multiple occurrences affecting both the tibia and fibula is presented. En bloc resection with wide operative margins was performed, and a large tibial defect of 23 cm was effectively bridged by a revascularized free fibular flap. At 13 months follow-up, there was no sign of local recurrence or metastasis, and the patient was mobile.     

Effect of temperature on blood flow and metabolism in a neurovascular island skin flap

Using the buttock flap in 29 white Yorkshire pigs, blood flow and O2 consumption were measured at dermal temperatures between 35 degrees C and 15 degrees C. Flow was measured with an electromagnetic flowmeter and O2 consumption was calculated as the product of blood flow and the difference in flap A-VO2. Baseline flow was 6.6 +/- .9 (SE) ml/100 g/min at 35 degrees C and 3.1 +/- .02 (SE) ml/10 g/min at 15 degrees C. Blood flow through the flap stopped completely at a dermal temperature of 14 degrees C. Oxygen consumption was 0.16 +/- .02 (SE) ml/100 g/min at 35 degrees C and 0.04 +/- 0.01 (SE) ml/100 g/min at 15 degrees C. At 20 degrees C blood flow was 4.3 ml/100 g/min and metabolism was .04 ml/100 g/min. In other words, blood flow was 65% of baseline, while O2 consumption was only 25% of baseline. The therapeutic effect of local cooling at 20 degrees C deserves further investigation. The cessation of flow at 14 degrees C may be caused by increased plasma viscosity.     

The effect of pressurized carbon dioxide as a temporary plasticizer and foaming agent on the hot stage extrusion process and extrudate properties of solid dispersions of itraconazole with PVP-VA 64.

The aim of the current research project was to explore the possibilities of combining pressurized carbon dioxide with hot stage extrusion during manufacturing of solid dispersions of itraconazole and polyvinylpyrrolidone-co-vinyl acetate 64 (PVP-VA 64) and to evaluate the ability of the pressurized gas to act as a temporary plasticizer as well as to produce a foamed extrudate. Pressurized carbon dioxide was injected into a Leistritz Micro 18 intermeshing co-rotating twin-screw melt extruder using an ISCO 260D syringe pump. The physicochemical characteristics of the extrudates with and without injection of carbon dioxide were evaluated with reference to the morphology of the solid dispersion and dissolution behaviour and particle properties. Carbon dioxide acted as plasticizer for itraconazole/PVP-VA 64, reducing the processing temperature during the hot stage extrusion process. Amorphous dispersions were obtained and the solid dispersion was not influenced by the carbon dioxide. Release of itraconazole from the solid dispersion could be controlled as a function of processing temperature and pressure. The macroscopic morphology changed to a foam-like structure due to expansion of the carbon dioxide at the extrusion die. This resulted in increased specific surface area, porosity, hygroscopicity and improved milling efficiency.     

Immunological mechanisms giving rise to latency of herpes simplex virus in the spinal ganglia of the mouse

In the model of genital herpes simplex virus (HSV)-infection of mice, early latency could be induced by passive immunization with HSV-specific antibodies and, to a lesser degree, by adoptive transfer of immune lymphocytes prepared from spleen and draining lymph nodes of genitally infected syngeneic mice. Conversely, spontaneously occurring latency was inhibited by treatment of the animals with cyclophosphamide (Cph) and, to a lesser degree, with cyclosporin A (CyA). Whereas the effect of CyA could be compensated by passively administered HSV-specific antibodies, that of Cph could not. Apparently specific antibodies cooperate with a non-specific proliferating cell type, probably macrophages and/or NK-cells, as could be demonstrated by significantly reduced antibody effect in silica-treated mice. Moreover, F(ab)₂ fragments, in contrast to complete antibody molecules, were inactive. HSV-specific antibodies and also immune lymphocytes had little effect on virus production in the mucous membranes, immune lymphocytes being at least as active as antibodies. It is therefore not probable that latency is induced by attenuation of the peripheral disease. It can rather be concluded that the neuron itself is the target for the action of specific antibodies, cooperating in turn with macrophages and/or NK cells.With support of the Deutsche Forschungsgemeinschaft, Schn 174/6-3     

Aktualisierte Kurzfassung der Leitlinien zur Pr?vention, Diagnostik und Therapie der nosokomial erworbenen Pneumonie

Hintergrund:  

Die nosokomiale Pneumonie gehört zu den häufigsten nosokomialen Infektionen und ist die häufigste auf der Intensivstation. Die nosokomiale Pneumonie ist mit einer signifikanten Mortalität und Morbidität assoziiert, und ihr Auftreten verschlechtert die Prognose des Patienten deutlich. Nach der Definition der DRGs auch im deutschen Krankenhaussystem ist die nosokomiale Pneumonie überwiegend Sache des Krankenhauses und kann somit nicht nur das Ergebnis der Patientenbehandlung, sondern auch das finanzielle Ergebnis des Krankenhauses beeinträchtigen.     

Zur Ätiologie und Prophylaxe des Ernte- bzw. Feldfiebers in Südbayern

Zusammenfassung Aufgabe der vorstehenden epidemiologischen Untersuchung war es, die Tatsachen des örtlichen und zeitlichen Auftretens des Erntefiebers bzw. Felfdiebers in das Licht derPettenkoferschen Auffassung von der örtlich-zeitlichen Bedingtheit der Seuchenentstehung zu stellen.Dabei ist zugleich ein klärendes Licht gefallen auf die Zusammenhänge, in welchen dieses Ernte- oder Feldfieber zur Hepatitis epidemica, zurWeilschen Krankheit, zum epidemischen Wasserfieber und zum Sumpfoder Schlammfieber steht. Zugleich haben wir gesehen, daß es sich bei allen diesen verwandten Krankheitszuständen umeine Endemizität der Krankheitsursachen handelt, welche in einer Reihe der Fälle eine Übertragung von Person zu Person vortäuscht. Damit wäre auch der soviel umstrittene infektiöse Charakter dieser Krankheitszustände geklärt.So haben wir gesehen, daß auf diesem vonPettenkofer gewiesenen Forschungswege doch eine gewisse Klärung der Ätiologie zu gewinnen ist, die auf dem bakteriologischen bzw. parasitologischen Forschungswege nicht erreicht ist. Auch haben sich gewisse Anhaltspunkte für eine Verhütung dieser neuen endemischen Krankheit ergeben, die, wenn sich ihre Beachtung als erfolgreich erweisen sollte, für die Durchführung des Vierjahresplanes, soweit dieselbe auf der Erntearbeit beruht, von Wichtigkeit sein würden.     

Mechanical Testing of Seven Fixation Methods for Generation of Compression Across a Midtarsal Osteotomy: A Comparison of Internal and External Fixation Devices

The purpose of this study was to assess 7 methods of fixation for a midtarsal osteotomy. Polyurethane foam models (N = 6) and cadaver specimens (N = 4-7) were used to examine the force generated by the different constructs of fixation. A midtarsal osteotomy was performed on each specimen in the test groups. The osteotomies were fixated either with 2 parallel 0.062-in Kirschner wires and 40-mm-long, 4-mm partially threaded, cancellous, cannulated titanium screws, an external ring fixator (frame), a frame with wires tensioned (tension), a frame with wires tensioned and compressed toward the osteotomy (tension and compression), a frame with tension, compression, and parallel Kirschner wires, or a frame with tension, compression, and two 4.0 cannulated parallel screws, respectively. Each model was fixated, and the force generated by the construct across the osteotomy was recorded via the use of pressure-sensitive film. Statistical analysis of the data in the polyurethane foam group determined that the use of frame with tension, compression, and two 4.0 parallel cannulated screws was statistically superior to 1) frame, 2) frame with tension, 3) 2 parallel Kirschner wires, 4) two 4.0 cannulated parallel screws, and 5) frame with tension and compression. A cadaver study determined that the frame with tension, compression, and 2 parallel Kirschner wires was statistically superior to 1) frame and 2) two parallel Kirschner wires. These findings suggest that there is a difference in the force generated by the type of fixation construct across a midtarsal osteotomy.