The effect of palytoxin on neuromuscular junctions in the anococcygeus muscle of the rat

Palytoxin, a highly toxic natural product isolated from zoanthids of the genus Palythoa, is accumulated by a wide range of fishes and marine invertebrates used as food in the Indo-Pacific. It is responsible for many incidents of human morbidity and mortality. The toxin is a potent smooth muscle spasmogen. The cause of the contraction of smooth muscle is unclear, but recent work strongly suggests that it is primarily initiated by the release of neurotransmitters from the motor innervation of the smooth muscle. We show here that palytoxin caused the swelling of the muscle cells and some internal organelles of the anococcygeus muscle of the rat, but no substantial structural damage to the tissue. Axons and Schwann cells were also swollen but the most dramatic feature was the depletion of synaptic vesicles from putative release sites in the axons. Some axons were physically damaged following exposure to the toxin, but this was relatively uncommon (<10% of all axons studied). In the majority of axons there was no damage to nerve terminal membranes, but there was damage to mitochondria. The depletion of vesicles involved all types – clear, dense-cored, large and small. Our observations and pharmacological data gathered elsewhere, provide a neuropathological basis for the spasmogenic activity of palytoxin.     

Results of Transplanting Developing Third Molars as Part of Orthodontic Space Management

PATIENTS AND METHOD: The aim of the present study was to contribute to a more accurate indication and better integration of developing third molar transplantation into orthodontic space management, using the results gleaned from the authors' own pool of patients. For this purpose, a clinical and radiographic examination of 61 transplanted developing molars in 57 patients was carried out after an average of 3.3 years. RESULTS: The overall success rate was 85%. Failure was due in 10% of cases to impaired periodontal healing (inflammatory root resorption, ankylosis, or increased pocket probing depths) and in 5% of cases to insufficient or arrested postoperative root development accompanied by increased transplant mobility. The incidence of postoperative cessation of further root development was significantly higher (p = 0.011) in transplants at early developmental stages, which also had a negative impact on the final root length, the crown-root ratio and the mobility values of these transplants. CONCLUSIONS: The transplantation of developing third molars should be given stronger consideration in treatment plans for orthodontic space management although it represents a real alternative to orthodontic space closure only in exceptional cases. However, unlike implantological or prosthodontic treatment, it offers an opportunity to replace a missing or non-retainable tooth with a patient's own vital and fully functional tooth, provided the appropriate transplant is selected.     

Screw angulation affects bone-screw stresses and bone graft load sharing in anterior cervical corpectomy fusion with a rigid screw-plate construct: a finite element model study

Background contextAnterior corpectomy and reconstruction with bone graft and a rigid screw-plate construct is an established procedure for treatment of cervical neural compression. Despite its reliability in relieving symptoms, there is a high rate of construct failure, especially in multilevel cases.PurposeThere has been no study evaluating the biomechanical effects of screw angulation on construct stability; this study investigates the C4–C7 construct stability and load-sharing properties among varying screw angulations in a rigid plate-screw construct.Study designA finite element model of a two-level cervical corpectomy with static anterior cervical plate.MethodsA three-dimensional finite element (FE) model of an intact C3–T1 segment was developed and validated. From this intact model, a fusion model (two-level [C5, C6] anterior corpectomy) was developed and validated. After corpectomy, allograft interbody fusion with a rigid anterior screw-plate construct was created from C4 to C7. Five additional FE models were developed from the fusion model corresponding to five different combinations of screw angulations within the vertebral bodies (C4, C7): (0°, 0°), (5°, 5°), (10°, 10°), (15°, 15°), and (15°, 0°). The fifth fusion model was termed as a hybrid fusion model.ResultsThe stability of a two-level corpectomy reconstruction is not dependent on the position of the screws. Despite the locked screw-plate interface, some degree of load sharing is transmitted to the graft. The load seen by the graft and the shear stress at the bone-screw junction is dependent on the angle of the screws with respect to the end plate. Higher stresses are seen at more divergent angles, particularly at the lower level of the construct.ConclusionThis study suggests that screw divergence from the end plates not only increases load transmission to the graft but also predisposes the screws to higher shear forces after corpectomy reconstruction. In particular, the inferior screw demonstrated larger stress than the upper-level screws. In the proposed hybrid fusion model, lower stresses on the bone graft, end plates, and bone-screw interface were recorded, inferring lower construct failure (end-plate fractures and screw pullout) potential at the inferior construct end.     

Linear and angular measurements of computer-generated models: are they accurate, valid, and reliable?

INTRODUCTION: Traditional advanced imaging modalities such as CT and MRI are limited in their ability to perform accurate linear distance and angular measurements regardless of anatomical orientation. The construction of 3D models has been used to perform anthropometric analyses as well as in the reconstruction of rapid prototypes. We hypothesized that such measurements would be precise to within 2 mm or 2 degrees of measurements performed with a coordinate measurement machine (CMM). We also hypothesized that there would be a high degree of interobserver reliability with these measurements. MATERIALS AND METHODS: Multiple aluminum screws were implanted in various positions in three foam pelvises which were subsequently scanned by CT and rendered as 3D models using a commercially available software package (Mimics). Linear and angular measurements were performed using a CMM machine, the software package, and a dial caliper or goniometer. The deviation of the measurements from the CMM data was compared using ANOVA. The interobserver reliability of both the manual and computer-generated measurements was calculated. RESULTS: The mean difference between the CMM distances and those measured manually and with the software was 2.12 +/- 1.20 mm and 1.57 +/- 1.05 mm, respectively. The mean difference between the CMM angular measurements and the angular measurements performed manually and with the software was 4.07 +/- 4.70 degrees and 1.62 +/- 1.32 degrees, respectively. In all cases, the manual measurements were significantly less accurate (p < 0.0001) and there was a high degree of interobserver reliability. CONCLUSIONS: Computer-generated measurements taken from three-dimensionally reconstructed models are more accurate than manual measurements and are within 2 mm and 2 degrees of measurements performed with a CMM. These measurements have high interobserver reliability.     

Comparison of survival by allocation to medical therapy, surgery, or heart transplantation for ischemic advanced heart failure.

BACKGROUND: To ascertain survival of ischemic advanced heart failure patients by treatment allocation, we examined the outcome of transplant assessment patients allocated to medical therapy, high-risk conventional surgery, or transplantation. METHODS: Patients were identified from the Papworth transplant database and excluded if primary etiology was not ischemic. Grouping was undertaken according to treatment allocation at initial assessment, and analysis was performed by intention to treat. Survival was computed from the time of assessment and Cox regression used to stratify patients according risk with the Heart Failure Survival Score. RESULTS: From May 1993 to September 2001, a total of 755 patients were admitted for transplant assessment, with 348 (46.1%) identified as having heart failure of ischemic origin. Variables required for calculation of the Heart Failure Survival Score was available in 273 patients (78.4%), and 20 patients (7.3%) were lost to follow-up. Of the remaining 253 patients, 89 (35.2%) were allocated to medical therapy, 32 (12.6%) to surgery, and 132 (52.2%) to transplantation. The relative risk (95% confidence limit) of death compared with medical therapy was 0.62 (0.28, 1.40) for surgery and 0.38 (0.24, 0.61) for transplantation in medium- to high-risk patients. For low-risk patients, the relative risks for death compared with medical therapy were 1.87 (0.63, 5.60) for surgery and 1.97 (0.79, 4.96) for transplantation. CONCLUSIONS: Transplantation improved survival of medium- and high-risk patients compared with medical therapy. In the low-risk group, this was not evident. However, repeated assessment of risk is required because the hazard for death rises steadily after the third year in these patients.     

In vitro cytotoxicity and phototoxicity of N-piperazinyl quinolone derivatives with a 2-thienyl group.

We examined the cytotoxic potential of nine N-[2-substituted-2-(2-thienyl)ethyl] piperazinyl quinolone derivatives on human oral epithelial mouth carcinoma (KB) and human squamous carcinoma (A431) cell lines. Phototoxic properties of these compounds were also evaluated by mouse 3T3 fibroblast under ultraviolet-A (UVA) irradiation. The percent of cell viability was evaluated by MTT assay. Compound 6 having a 4-[2-(phenylmethoxyimino)-2-(2-thienyl)ethyl] group attached to N4 position of piperazine ring of enoxacin showed the highest cytotoxicity potential on both A431 and KB cell lines (IC50 of 3.11+/-0.52 and 4.91+/-1.94 microg/ml, respectively). While some of the other tested compounds exhibited clear phototoxic potential in 3T3 cell line, compound 6 showed only a minor potential of phototoxicity. These findings suggest the high potential of 4-[2-(phenylmethoxyimino)-2-(2-thienyl)ethyl] derivative of enoxacin as a cytotoxic compound with low potency of phototoxic reactions. The mentioned chemical was identified to be of special interest for further characterization.