骨形态发生蛋白2及碱性成纤维生长因子2对大鼠骨髓间充质干细胞膜片增殖和成骨分化的影响

文题释义： 细胞膜片技术：是在体外接种培养高密度的细胞，使其相互融合生长至100%而形成的透明致密膜状物。该技术不需要胰酶消化即可收集细胞，因此保留了大量的胞外基质、细胞间连接以及细胞-基质连接等结构。目前细胞膜片技术已成为组织工程领域的研究热点，已被推广应用于牙周膜、角膜、心脏、软骨、食管等多种组织器官修复。 成骨细胞：主要由内外骨膜和间充质始祖细胞分化而来，在复杂的骨形成过程中发挥着主要的功能，承担着骨基质的合成、分泌和矿化。骨髓间充质干细胞具有多向分化潜能，能定向分化为成骨细胞，其成骨分化过程可受多种因素的影响，如细胞因子的调控、遗传因素和激素水平等。背景：现阶段骨形态发生蛋白2和碱性成纤维生长因子2对骨髓间充质干细胞膜片增殖、成骨分化的影响和作用机制还尚未可知，如何将生长因子与组织工程细胞膜片技术相整合，最终将其用于骨缺损修复具有重要意义。 目的：探讨单独及联合应用骨形态发生蛋白2和碱性成纤维生长因子2对骨髓间充质干细胞膜片增殖和成骨分化的影响。 方法：体外分离培养鉴定SD大鼠骨髓间充质干细胞并构建细胞膜片，选用不同质量浓度的骨形态发生蛋白2和碱性成纤维生长因子2单独及联合诱导骨髓间充质干细胞膜片，CCK-8法结合碱性磷酸酶活性检测确定2种因子促进膜片增殖和成骨分化的最佳有效质量浓度；然后对骨髓间充质干细胞膜片进行成骨诱导，通过大体及显微镜观察、Vonkossa染色、茜素红染色、RT-PCR检测相关成骨标志物来评估诱导效果。 结果与结论：单独应用骨形态发生蛋白2可增强骨髓间充质干细胞膜片的碱性磷酸酶活性，最佳质量浓度为100 μg/L(P < 0.001)，单独应用碱性成纤维生长因子2能加速骨髓间充质干细胞膜片的增殖，最佳质量浓度为20 μg/L(P < 0.001)，而联合应用既可以促进膜片增殖又能提高其碱性磷酸酶活性(P < 0.001)；经成骨诱导后，4组膜片在形态学上无明显差异，均能诱导骨髓间充质干细胞膜片的成骨分化，其中联合组钙结节最明显(P < 0.001)，可显著促进膜片晚期成骨分化并抑制其早期成骨分化，具有明显的协同促进作用(P < 0.001)。结果表明，骨形态发生蛋白2和碱性成纤维生长因子2联合应用时具有协同作用，既可以促进骨髓间充质干细胞膜片增殖，又能显著增强其成骨诱导能力。ORCID: 0000-0003-1918-579X(何惠宇) 中国组织工程研究杂志出版内容重点：干细胞；骨髓干细胞；造血干细胞；脂肪干细胞；肿瘤干细胞；胚胎干细胞；脐带脐血干细胞；干细胞诱导；干细胞分化；组织工程     

可弯曲胸腔镜和硬质胸腔镜诊断不明原因胸腔积液的对比临床研究

目的对比可弯曲胸腔镜和硬质胸腔镜在不明原因胸腔积液诊断中的准确性和安全性。方法采用前瞻性随机对照研究,连续筛选四川大学华西医院2012年3月至2014年3月期间不明原因胸腔积液住院患者,患者年龄18~75岁。经知情同意后,患者随机进入可弯曲胸腔镜组或硬质胸腔镜组进行检查。结果可弯曲胸腔镜组入组49例患者,硬质胸腔镜组入组48例患者。两组共有44例患者通过胸腔镜检查确诊为恶性疾病,48例确诊为良性疾病。两组诊断不明原因胸腔积液总体准确性分别为93.9%和95.8%,可弯曲胸腔镜组诊断肿瘤的敏感性为96.0%,硬质胸腔镜组诊断肿瘤的敏感性为95.2%,两组诊断肿瘤的特异性均为100.0%,两组之间差异无统计学意义。两种胸腔镜技术并发症多数轻微,患者均耐受良好。结论对于不明原因胸腔积液,可弯曲胸腔镜诊断的准确性与硬质胸腔镜相当。尽管可弯曲胸腔镜取材组织小,但是通过多点多次取材,所获得的组织标本能满足病理科医生进行包括免疫组织化学检测在内的疾病诊断。     

Porocarcinoma coexisting at a site of Bowen disease in a 63‐year‐old woman

Porocarcinoma is an unusual, locally aggressive and potentially fatal neoplasm. Several cutaneous malignancies have been described in association with porocarcinoma, including squamous cell carcinoma, basal cell carcinoma and tricholemmal carcinoma. Previous reports have indicated that the occurrence of malignant tumours in combination with porocarcinoma is extremely rare, in particular with regard to Bowen disease (BD). We report an uncommon case of porocarcinoma occurring synchronously in a single BD lesion in a 63‐year‐old woman with multiple BD lesions. The clinical and histological findings confirmed this diagnosis.     

Coronary Artery Lumen Segmentation Using Location–Adaptive Threshold in Coronary Computed Tomographic Angiography: A Proof-of-Concept

ObjectiveTo compare the lumen parameters measured by the location-adaptive threshold method (LATM), in which the inter- and intra-scan attenuation variabilities of coronary computed tomographic angiography (CCTA) were corrected, and the scan-adaptive threshold method (SATM), in which only the inter-scan variability was corrected, with the reference standard measurement by intravascular ultrasonography (IVUS).Materials and MethodsThe Hounsfield unit (HU) values of whole voxels and the centerline in each of the cross-sections of the 22 target coronary artery segments were obtained from 15 patients between March 2009 and June 2010, in addition to the corresponding voxel size. Lumen volume was calculated mathematically as the voxel volume multiplied by the number of voxels with HU within a given range, defined as the lumen for each method, and compared with the IVUS-derived reference standard. Subgroup analysis of the lumen area was performed to investigate the effect of lumen size on the studied methods. Bland-Altman plots were used to evaluate the agreement between the measurements.ResultsLumen volumes measured by SATM was significantly smaller than that measured by IVUS (mean difference, 14.6 mm³; 95% confidence interval [CI], 4.9–24.3 mm³); the lumen volumes measured by LATM and IVUS were not significantly different (mean difference, −0.7 mm³; 95% CI, −9.1–7.7 mm³). The lumen area measured by SATM was significantly smaller than that measured by LATM in the smaller lumen area group (mean of difference, 1.07 mm²; 95% CI, 0.89–1.25 mm²) but not in the larger lumen area group (mean of difference, −0.07 mm²; 95% CI, −0.22–0.08 mm²). In the smaller lumen group, the mean difference was lower in the Bland-Altman plot of IVUS and LATM (0.46 mm²; 95% CI, 0.27–0.65 mm²) than in that of IVUS and SATM (1.53 mm²; 95% CI, 1.27–1.79 mm²).ConclusionSATM underestimated the lumen parameters for computed lumen segmentation in CCTA, and this may be overcome by using LATM.