Diagnosing osteoporosis by using dental panoramic radiographs: the OSTEODENT project.

OBJECTIVES: Measurement of cortical thickness and subjective assessment of cortical porosity on panoramic radiographs are methods previously reported for diagnosing osteoporosis. The aims of this study were to determine the relative efficacy of the mandibular cortical index and cortical width in detecting osteoporosis, both alone and in combination, and to determine the optimal cortical width threshold for referral for additional osteoporosis investigation. STUDY DESIGN: Six hundred seventy-one postmenopausal women 45 to 70 years of age were recruited for this study. They received dual energy x-ray absorptiometry (DXA) scans of the left hip and lumbar spine (L1 to L4), and dental panoramic radiographic examinations of the teeth and jaws. Three observers separately assessed the mandibular cortical width and porosity in the mental foramen region of the mandible. Cortical width was corrected for magnification errors. Chi-squared automatic interaction detection analysis (CHAID) software was used (SPSS AnswerTree, version 3.1, SPSS Inc., Chicago, IL). RESULTS: Chi-squared automatic interaction detection analysis showed that the cortical porosity was a poorer predictor of osteoporosis than mandibular cortical width. For the 3 observers, a mandibular cortical width of <3 mm provided diagnostic odds ratios of 6.51, 6.09, and 8.04. The test is therefore only recommended in triage screening of individuals by using radiographs made for purposes other than osteoporosis. CONCLUSION: When evaluating panoramic radiographs, only those patients with the thinnest mandibular cortices (i.e., <3 mm) should be referred for further osteoporosis investigation.     

Dental cone beam computed tomography: justification for use in planning oral implant placement

Intra‐oral and panoramic radiographs are most frequently used in oral health care. Yet, the inherent nature of jaws and teeth renders three‐dimensional diagnosis essential, especially in relation to oral surgery. Nowadays, this can be accomplished by dental cone beam computed tomography, which provides high‐quality images at low radiation doses and low costs. Nonetheless, the effective dose ranges of cone beam computed tomography machines may easily vary from 10 to 1000 μSv, this being equivalent to two to 200 panoramic radiographs, even for similar presurgical indications. Moreover, the diagnostic image quality varies massively among available machines and parameter settings. Apart from the radiodiagnostic possibilities, dental cone beam computed tomography may offer a vast therapeutic potential, including opportunities for surgical guidance and further prosthetic rehabilitation via computer‐aided design/computer‐aided manufacturing solutions. These additional options may definitely explain part of the success of cone beam computed tomography for oral implant placement. In conclusion, dental cone beam computed tomography imaging could be justified for oral implant‐related diagnosis, planning and transfer to surgical and further prosthetic treatment, but guidelines for justification and cone beam computed tomography optimization remain mandatory.     

Validity of 2D lateral cephalometry in orthodontics: a systematic review

Lateral cephalometric radiography is commonly used as a standard tool in orthodontic assessment and treatment planning. The aim of this study was to evaluate the available scientific literature and existing evidence for the validation of using lateral cephalometric imaging for orthodontic treatment planning. The secondary objective was to determine the accuracy and reliability of this technique. We did not attempt to evaluate the value of this radiographic technique for other purposes. A literature search was performed using specific keywords on electronic databases: Ovid MEDLINE, Scopus and Web of Science. Two reviewers selected relevant articles, corresponding to predetermined inclusion criteria. The electronic search was followed by a hand search of the reference lists of relevant papers. Two reviewers assessed the level of evidence of relevant publications as high, moderate or low. Based on this, the evidence grade for diagnostic efficacy was rated as strong, moderately strong, limited or insufficient. The initial search revealed 784 articles listed in MEDLINE (Ovid), 1,034 in Scopus and 264 articles in the Web of Science. Only 17 articles met the inclusion criteria and were selected for qualitative synthesis. Results showed seven studies on the role of cephalometry in orthodontic treatment planning, eight concerning cephalometric measurements and landmark identification and two on cephalometric analysis. It is surprising that, notwithstanding the 968 articles published in peer-reviewed journals, scientific evidence on the usefulness of this radiographic technique in orthodontics is still lacking, with contradictory results. More rigorous research on a larger study population should be performed to achieve full evidence on this topic.     

Magnetic resonance neurography of the head and neck: state of the art,anatomy, pathology and future perspectives

Magnetic resonance neurography allows for the selective visualization of peripheral nerves and is increasingly being investigated. Whereas in the past, the imaging of the extracranial cranial and occipital nerve branches was inadequate, more and more techniques are now available that do allow nerve imaging. This basic review provides an overview of the literature with current state of the art, anatomical landmarks and future perspectives. Furthermore, we illustrate the possibilities of the three-dimensional CRAnial Nerve Imaging (3D CRANI) MR-sequence by means of a few case studies.     

Guided Endodontics: Use of a Sleeveless Guide System on an Upper Premolar with Pulp Canal Obliteration and Apical Periodontitis

Guided endodontics has been used for the treatment of anterior teeth with a successful outcome. This approach is not only limited to anterior teeth because it can also be used for the treatment of premolars and molars. However, in such cases, space may be a limitation because a long bur has to be used in addition to the guide being placed on top of the teeth. The aim of this case report was to present a novel guided endodontics technique using a sleeveless 3-dimensional–printed guide. This design can reduce vertical space, allowing an open view of the tooth and irrigation during drilling. A 46-year-old female patient consulted the endodontic department with intermittent pain around tooth #5. Tooth #5 presented pain upon percussion and responded negative to a cold test. The initial periapical radiograph revealed an apical radiolucency with pulp canal obliteration. Clinically, there was no sinus tract. The tooth was diagnosed with pulp necrosis and symptomatic apical periodontitis. Guided endodontic treatment was performed with a sleeveless 3-dimensional–printed guide and long neck carbide bur with a head diameter of 1 mm to drill a minimally invasive access cavity up to the root canal. A completely healed apical area of tooth #5 was visible after 1 year on periapical radiographs. This technique seems to be a promising alternative in comparison with the conventional guided endodontic guide design for the negotiation of pulp canal obliteration in cases in which vertical space is limited.     

Artificial Intelligence for Fast and Accurate 3-Dimensional Tooth Segmentation on Cone-beam Computed Tomography

IntroductionTooth segmentation on cone-beam computed tomographic (CBCT) imaging is a labor-intensive task considering the limited contrast resolution and potential disturbance by various artifacts. Fully automated tooth segmentation cannot be achieved by merely relying on CBCT intensity variations. This study aimed to develop and validate an artificial intelligence (AI)-driven tool for automated tooth segmentation on CBCT imaging.MethodsA total of 433 Digital Imaging and Communications in Medicine images of single- and double-rooted teeth randomly selected from 314 anonymized CBCT scans were imported and manually segmented. An AI-driven tooth segmentation algorithm based on a feature pyramid network was developed to automatically detect and segment teeth, replacing manual user contour placement. The AI-driven tool was evaluated based on volume comparison, intersection over union, the Dice score coefficient, morphologic surface deviation, and total segmentation time.ResultsOverall, AI-driven and clinical reference segmentations resulted in very similar segmentation volumes. The mean intersection over union for full-tooth segmentation was 0.87 (±0.03) and 0.88 (±0.03) for semiautomated (SA) (clinical reference) versus fully automated AI-driven (F-AI) and refined AI-driven (R-AI) tooth segmentation, respectively. R-AI and F-AI segmentation showed an average median surface deviation from SA segmentation of 9.96 μm (±59.33 μm) and 7.85 μm (±69.55 μm), respectively. SA segmentations of single- and double-rooted teeth had a mean total time of 6.6 minutes (±76.15 seconds), F-AI segmentation of 0.5 minutes (±8.64 seconds, 12 times faster), and R-AI segmentation of 1.2 minutes (±33.02 seconds, 6 times faster).ConclusionsThis study showed a unique fast and accurate approach for AI-driven automated tooth segmentation on CBCT imaging. These results may open doors for AI-driven applications in surgical and treatment planning in oral health care.     

Three-dimensional facial hard tissue symmetry in a healthy Caucasian population group: a systematic review

Clinical Oral Investigations - The aim of this study was to quantify the symmetry of the facial hard tissue structures using three-dimensional radiographic imaging modalities in a normal Caucasian...     

PROPHYLACTIC VS. SYMPTOMATIC THIRD MOLAR REMOVAL: EFFECTS ON PATIENT POSTOPERATIVE MORBIDITY

PurposeThe present study aimed to assess differences in postoperative morbidity between prophylactic and symptomatic third molar removals, and to assess the effect of age on the recovery of the patient.MethodsPatients admitted for third molar removal were prospectively followed up four times during treatment in context of the M3BE study. Data were collected through pre-, peri and postoperative surveys (days 3 and 10). Uni- and multivariable logistic regression was used to assess the probability of postoperative symptoms of discomfort on day 3 and day 10 according to several patient- and surgery-related predictive factors (age, gender, indication for removal, method of extraction, anesthesia and number of extracted maxillary and/or mandibular third molars).ResultsIn total, 6010 patients with a mean age of 25.2 (± 11.2) underwent 6347 surgeries to have 15,357 third molars removed. Frequently observed symptoms of postoperative discomfort were pain, trismus and swelling, all of which were transient in nature with steep decreases from postoperative days 3 to 10. Increasing age was associated with an enhanced risk of persistent pain, trismus and swelling and a significantly higher risk of iatrogenic injury to the inferior alveolar nerve. Symptomatic indications for removal were more common in patients over age 25 years, but these pre-existing pathologies did not compromise the postoperative recovery process. Other factors related to postoperative morbidity were female gender, intraoperative osteotomy and the number of extractions.ConclusionThe results of this study suggest that there are convincing patient- and surgery-related factors that favor timely third molar removal, preferably before the age of 25, especially in order to avoid persistent morbidity and nerve complications.