Zinc sulfate addition to glass-ionomer-based cements: influence on physical and antibacterial properties, zinc and fluoride release.

OBJECTIVES: The aim of this study is to evaluate the effect of ZnSO(4) addition to a conventional glass ionomer and a resin-modified glass ionomer on solubility, flexural strength, zinc and fluoride (F) release, and Streptococcus mutans growth inhibition. METHODS: 5 or 10% ZnSO(4) was added to Vitremer and Ketac-Fil powders. Solubility test was performed based on ISO 7489. Flexural strength was determined by 3-point bending test based on ISO 4049. Zn release/uptake was determined by atomic emission spectrometry; F release/uptake was measured using a F-specific electrode. Both release measurements were performed for 15 d before and 15 d after recharging. Antibacterial test was conducted according to agar plate methods against S. mutans, by measuring the inhibition halos in 1-h and 15-d specimens. Data were analyzed by ANOVA. RESULTS: Solubility increased with higher ZnSO(4) content, but remained below the ISO 7489 limit. Flexural strength was not affected by ZnSO(4) addition, and Vitremer performed better than Ketac-Fil. The control materials released no zinc. Vitremer with 10% ZnSO(4) released the highest amount of zinc. Fluoride release was similar for Ketac-Fil and Vitremer. In both cases, the highest amounts were released in the first 24 h. The growth inhibition halo of S. mutans was similar for both materials with highest content of ZnSO(4) and occurred only with 1-h specimens. SIGNIFICANCE: Zinc addition decreased microorganisms growth and improved fluoride release, without significantly affecting the materials' flexural strength and solubility.     

Study of talc for pharmaceutical use. Trials of pharmacopoeias

A study has been carried out on the possible pharmaceutical use of spanish talcs following the normalized assays of the main european pharmacopoeia and other quantitative methods. Only the talc nr3, not processed, meets all the assays of pharmacopoeia. The samples 2 and 4 (crushed) exceed the highest tolerated content in chlorides. The talc 1 (also crushed) only meets the loss on drying. The measures of some of these assays by using quantitative methods lead to more correct results and even sometimes in opposition with those obtained by pharmacopoeia methods. The particle size estimated by shifting and sedimentation shows that the crushed talcs are silty, whereas the only talc not processed is sandy. Considering the medium sizes estimated by scanning microscopy, it can be said that the pulverization of the talcs 1, 2 and 4 is characteristic of a micronization.     

A prospective analysis of 1400 pulmonary artery catheterizations in patients undergoing cardiac surgery

During 1983 and 1984, 1305 patients underwent 1,400 pulmonary artery (PA) catheterizations. Successful placement was achieved in 1397 (99.6%) of 1,403 attempts. The catheters were inserted via the right internal jugular vein on 1364 occasions. The median duration of monitoring was 28 h with a range from 3 to 220 h. Central venous puncture complications included carotid artery puncture in 67 instances (4.8%) and pneumothorax in one patient. Insertion of the catheters was associated with supraventricular arrhythmias on 11 occasions, ventricular arrhythmias on 930 (66.4%), right bundle branch block on two and a total heart block on one occasion. Eighteen (2.3%) of the 794 cultured catheter tips were positive. An in situ time of more than 72 h was associated with a significantly higher percentage (7.2%) of positive tip cultures compared with an in situ time of less than 72 h (P less than 0.01). Repeated PA catheterization was not associated with significantly more complications than the initial catheterization. The results show that monitoring with a PA catheter in cardiac surgical patients is associated with a low incidence of morbidity.