An experimental collagen-impregnated dacron graft: Potential for endothelial seeding

This study evaluates the potential for endothelial seeding of a collagen-impregnated Dacron graft with or without surface modifiers (fibronectin, heparin) to attach and retain these cells during flow. Human umbilical endothelial cells were harvested, cultured, labeled with Indium111-oxine and seeded onto 30 mm X 4 mm diameter grafts. Six graft surfaces were studied: 1) a collagen-impregnated Dacron graft, HemashieldR (C); 2) C + fibronectin (C + F); 3) C + heparin (C + H); 4) C + F + H; 5) HytrelR + F (Hyt + F); and 6) Hyt + F + H. Radioactive loss determined the percentage attachment and then percentage retention of labeled inoculum after a one-hour in vitro perfusion. Scanning electron and light microscopy demonstrated the endothelium on the graft surface following perfusion. Fibronectin-coated grafts had a significantly higher percentage attachment than those without fibronectin (ANOVA, P less than 0.05). However, the percentage retention following perfusion was similar for all Dacron grafts and statistically inferior to the HytrelR grafts studied (ANOVA, P less than 0.05). SEM evaluation of the C + F + H graft surface was qualitatively the most impressive Dacron surface for seeding, yet was inferior to the HytrelR graft. We conclude that fibronectin benefits the initial attachment of endothelium to collagen-coated Dacron rivaling the HytrelR surface. Fibronectin does not improve percentage retention of the HemashieldR surface during perfusion, therefore, some of its initial benefit is lost.     

The effect of optical design on micromanipulator spot size using CO2 laser irradiation

Objective: The study goal was to compare the laser spot size created using reflective and refractive micromanipulators with a CO₂ laser and to determine the sensitivity of spot size to laser power. Study Design and Setting: A CO₂ laser and operating microscope (400-mm focal length) was coupled to either a reflective (Cassegrain-like) or refractive micromanipulator. Laser spot size was determined by measuring the region of ablation created by laser irradiation of wood (dry tongue depressors), exposed photographic film, and agar gel using optical micrometry. Laser power varied from 0.5 to 20 W with pulse durations of 0.1 and 0.5 second. Results: The reflective micromanipulator demonstrated overall smaller spot sizes for a given laser power and lower incremental change in spot size with increasing power. The reflective design demonstrated less sensitivity to increases in laser power. Conclusions: Micromanipulator optical design can result in significant differences in laser spot size. The reflective device used in this study demonstrated less sensitivity to increasing laser power. (Otolaryngol Head Neck Surg 2002;126:593-597.)     

Further evidence of dopamine transporter dysregulation in ADHD: a controlled PET imaging study using altropane.

BACKGROUND: The dopamine transporter (DAT) is known to be a key regulator of dopamine, and recent studies of genetics, treatment, and imaging have highlighted the role of DAT in attention-deficit/hyperactivity disorder (ADHD). The findings of in vivo neuroimaging of DAT in ADHD have been somewhat discrepant, however. METHOD: Dopamine transporter binding was measured using a highly selective ligand (C-11 altropane) and positron emission tomography (PET). The sample consisted of 47 well-characterized, treatment-na?ve, nonsmoking, non-comorbid adults with and without ADHD. Additionally, control subjects had few symptoms of ADHD. RESULTS: Results showed significantly increased DAT binding in the right caudate in adults with ADHD compared with matched control subjects without this disorder. CONCLUSIONS: These results confirm abnormal DAT binding in the striatum of adults with ADHD and provide further support that dysregulation of DAT may be an important component of the pathophysiology of ADHD.     

Influence on binding of third-order torque to second-order angulation

Using an earlier model, which described the critical contact angle for binding from second-order angulation alone, a more generalized model is derived that combines the effects of angulation and torque. From this vantage point, the onset of binding is evaluated for 3 scenarios: second-order angulation alone, third-order torque only, and a combination of second-order angulation and third-order torque. These scenarios are detailed by plotting the critical contact angle for binding against the torque angle as a function of 10 wire dimensions (16 x 16, 16 x 22, 17 x 17, 17 x 22, 17 x 25, 18 x 18, 18 x 22, 18 x 25, 19 x 25, and 21 x 25 mil), 4 bracket widths (70, 100, 130, and 160 mil), and 4 bracket slots (18, 20.5, 22, and 24.5 mil). From these plots, we learn that each wire base dimension (eg, an 18-mil base as found in 18 x 18-mil, 18 x 22-mil and 18 x 25-mil archwires) has a common maximum critical contact angle for binding. Moreover, each wire-slot combination has a common maximum torque angle, which is independent of bracket width. Finally, we learn that archwire-bracket combinations that use a metric 0.5-mm slot might have some advantages with regard to torquing--given the current philosophy that light, continuous forces are more favorable.