Quality assurance of a helical tomotherapy machine

Helical tomotherapy has been developed at the University of Wisconsin, and 'Hi-Art II' clinical machines are now commercially manufactured. At the core of each machine lies a ring-gantry-mounted short linear accelerator which generates x-rays that are collimated into a fan beam of intensity-modulated radiation by a binary multileaf, the modulation being variable with gantry angle. Patients are treated lying on a couch which is translated continuously through the bore of the machine as the gantry rotates. Highly conformal dose-distributions can be delivered using this technique, which is the therapy equivalent of spiral computed tomography. The approach requires synchrony of gantry rotation, couch translation, accelerator pulsing and the opening and closing of the leaves of the binary multileaf collimator used to modulate the radiation beam. In the course of clinically implementing helical tomotherapy, we have developed a quality assurance (QA) system for our machine. The system is analogous to that recommended for conventional clinical linear accelerator QA by AAPM Task Group 40 but contains some novel components, reflecting differences between the Hi-Art devices and conventional clinical accelerators. Here the design and dosimetric characteristics of Hi-Art machines are summarized and the QA system is set out along with experimental details of its implementation. Connections between this machine-based QA work, pre-treatment patient-specific delivery QA and fraction-by-fraction dose verification are discussed.     

Construction,in vitro and in vivo evaluation of an in-house conductance meter for measurement of skin hydration

Different probes are used in dermato-cosmetic research to measure the electrical properties of the skin. The principle governing the choice of the geometry and material of the measuring probe is not well defined in the literature and some device's measuring principles are not accessible for the scientific community. The purpose of this work was to develop a simple inexpensive conductance meter for the objective in vivo evaluation of skin hydration.The conductance meter probe was designed using the basic equation governing wave propagation along Transverse Electromagnetic transmission lines. It consisted of two concentric copper circular electrodes printed on FR4 dielectric material.The performance of the probe was validated by evaluating its measurement depth, its ability to monitor in vitro water sorption–desorption and in vivo skin hydration effect in comparison to that of the Corneometer CM 825. The measurement depth of the probe, 15 μm, was comparable to that of CM 825. The in vitro readings of the probe correlated strongly with the amount of water adsorbed on filter paper. Skin hydration after application of a moisturizer was monitored effectively by the new probe with good correlation to the results of CM 825.In conclusion, a simple probe for evaluating skin hydration was made from off-the-shelf materials and its performance was validated in comparison to a commercially available probe.     

Mental distress and job satisfaction in Palestinian nurses exposed to workplace aggression: a cross-sectional study

Background

Nurses who are exposed to workplace aggression from patients, patient relatives, or colleagues are at risk for mental health disorders and job dissatisfaction. The aim of this study was to assess the prevalence of exposure to workplace aggression and the association between mental distress and job satisfaction in nurses working in the Hebron district of the occupied Palestinian territory.

Full-term viable abdominal pregnancy: a case report and review

A full-term abdominal pregnancy culminating in the birth of a live healthy baby by laparotomy is described.     

Resolution of severe oncogenic hypophosphatemic osteomalacia after resection of a deeply located soft-tissue tumour

Oncogenic osteomalacia is a rare metabolic bone disease characterized by phosphate leakage from the kidney and subsequent hypophosphatemia. It is caused by a phosphaturic factor produced by certain tumours. Removal of such tumours can completely cure the condition. Here, we report the case of a patient who was crippled with oncogenic osteomalacia. Extensive study revealed a tumour deeply located in the pelvis; removal of the tumour resulted in complete recovery. The tumour was identified as a mesenchymal tumour (mixed connective-tissue variant). The diagnostic evaluation, differential diagnosis, and treatment are discussed.     

Association of vitamin D receptor gene polymorphisms with chronic and aggressive periodontitis in Jordanian patients

Vitamin D acts through binding with vitamin D receptor (VDR) and is responsible for regulating bone metabolism and mineralization; it also suppresses the immune system. The aim of this study was to investigate if VDR gene polymorphisms are associated with chronic periodontitis (CP) and aggressive periodontitis (AgP) in a Jordanian population. A total of 99 patients with CP, 63 patients with AgP, and 126 controls were genotyped using PCR‐restriction fragment length polymorphism (RFLP) for BsmI, ApaI, and TaqI single nucleotide polymorphisms (SNPs). The association was determined after correcting for confounding factors using multivariate logistic regression analysis. Estimation of haplotype frequencies was carried out using the EH program, and haplotypes were constructed using the phase 2.1 program. After correcting for confounding factors, multivariate logistic regression analysis revealed that inheritance of the BsmI bb genotype or the ApaI aa genotype was associated with increased risk of developing CP (OR = 2.4 and OR = 3.4, respectively) but with reduced risk of developing AgP (OR = 0.4 and OR = 0.3, respectively). This was further supported by association of the ba haplotype with CP but not with AgP. This study supports an association of VDR gene polymorphisms with CP and AgP in a Jordanian population; however, the pattern of association was different between the two diseases.     

Tenth value layers for 60Co gamma rays and for 4, 6, 10, 15, and 18 MV x rays in concrete for beams of cone angles between 0 degrees and 14 degrees calculated by Monte Carlo simulation

The calculation of shielding barrier thicknesses for radiation therapy facilities according to the NCRP formalism is based on the use of broad beams (that is, the maximum possible field sizes). However, in practice, treatment fields used in radiation therapy are, on average, less than half the maximum size. Indeed, many contemporary treatment techniques call for reduced field sizes to reduce co-morbidity and the risk of second cancers. Therefore, published tenth value layers (TVLs) for shielding materials do not apply to these very small fields. There is, hence, a need to determine the TVLs for various beam modalities as a function of field size. The attenuation of (60)Co gamma rays and photons of 4, 6, 10, 15, and 18 MV bremsstrahlung x ray beams by concrete has been studied using the Monte Carlo technique (MCNP version 4C2) for beams of half-opening angles of 0 degrees , 3 degrees , 6 degrees , 9 degrees , 12 degrees , and 14 degrees . The distance between the x-ray source and the distal surface of the shielding wall was fixed at 600 cm, a distance that is typical for modern radiation therapy rooms. The maximum concrete thickness varied between 76.5 cm and 151.5 cm for (60)Co and 18 MV x rays, respectively. Detectors were placed at 630 cm, 700 cm, and 800 cm from the source. TVLs have been determined down to the third TVL. Energy spectra for 4, 6, 10, 15, and 18 MV x rays for 10 x 10 cm(2) and 40 x 40 cm(2) field sizes were used to generate depth dose curves in water that were compared with experimentally measured values.     

Cardiac effects of fish oil in a rat model of streptozotocin-induced diabetes

Background and aims

Fish oil (FO) is rich in omega-3 polyunsaturated fatty acids, which have cardio-protective effects. This study aims to evaluate effects of FO in a rat model of streptozotocin (STZ) induced diabetes.