Isolation and characterization of wear debris generated in patients wearing polyethylene Hylamer inserts, gamma irradiated in air

Hylamer polyethylene was used in the early 1990s to make hip-joint components. Clinical experience has shown that these components, if sterilized by gamma rays in the presence of oxygen, are easily affected by wear, which then leads to osteolysis. The authors analyzed polyethylene wear particles in seven patients who had received Hylamer polyethylene implants sterilized by gamma rays in air and had suffered prosthetic loosening. The results were compared to those of six controls, who had received traditional polyethylene implants, sterilized by the same method. The frequency distribution of globular and fibrillar particles was similar in both groups (38.5% in Hylamer, 45.2% in controls). The globular particles in the Hylamer samples had a mean area of 0.12 microm2, which was significantly lesser than that of the controls (0.30 microm2). The width of fibrillar particles in the Hylamer samples was significantly lesser than that of the controls. Therefore, the two materials, despite undergoing the same type of sterilization, produced different types of wear, due to their different properties. In conclusion, the difference in the morphology of Hylamer polyethylene wear particles in comparison with PCA might have caused a more intensive biological response, early and massive osteolysis, and therefore, early loosening.     

The treatment of anterior recurrent dislocation of the shoulder: the Bankart-Delitala procedure

The authors report the results of 110 shoulder capsulorrhaphies performed according to the Bankart-Delitala technique. After a mean period of 104 months +/- 63 the clinical results, evaluated on the basis of the Rowe method were excellent-good in 94.6% of cases, and fair-poor in 5.4%. In 83.6% of cases there was no deficit in motility of the shoulder submitted to surgery, in 16.4%, the shoulder presented deficit in extrarotation (exceeding 15 degrees in only 1 case, equal to 0.9%).     

Diagnostic yield and therapeutic implications of capsule endoscopy in obscure gastrointestinal bleeding

AIM: The main aim of this study was to evaluate efficacy and therapeutic impact of capsule endoscopy (CE) in obscure gastrointestinal bleeding (OGIB). In addition, we evaluated the software of automatic detection of red zones (SBI, Given Imaging). PATIENTS AND METHODS: From June 2002 to June 2003, thirty-five patients with OGIB underwent capsule endoscopy after negative upper and lower digestive endoscopy. Capsule endoscopy was performed following a 12-hour fasting period and some received 2 L of PEG the night before for bowel preparation. RESULTS: CE was performed for occult (N=18) or overt (N=17) OGIB. Potentially bleeding lesions were found in 16/35 patients (45.7%). Lesions were angiodysplasias (N=8), ulcerations (N=4), tumors (N=2) and active bleeding without visible lesion (N=2). Lesions were located in gastric antrum (N=1), duodenum (N=2) and jejuno-ileum (N=13). Endoscopic (N=10), surgical (N=2) or medical (N=1) treatments were performed in 13/35 (37%). SBI was retrospectively evaluated in 24 patients with sensitivity, specificity, positive and negative predictive value of respectively 45%, 73%, 50% and 69%. CE retention during 10 days occurred in a patient with a small bowel NSAID-induced stricture. CONCLUSION: CE is a safe and effective procedure in the management of OGIB and had a therapeutic impact in more than one third of patients.     

Photochemically Mediated Atom Transfer Radical Polymerization Using Polymeric Semiconductor Mesoporous Graphitic Carbon Nitride

Photochemically mediated atom transfer radical polymerization of vinyl monomers is successfully activated by ecofriendly heterogeneous mesoporous graphitic carbon nitride (mpg‐C₃N₄). This method pertains to the use of mpg‐C₃N₄ as photoactivator for reduction of initially loaded copper(II) species, thus promoting the in situ formation of the copper(I) species. The controlled nature of the polymerizations in both natural sunlight and UV‐light irradiation at ambient temperature is confirmed by the good agreement of the kinetics of the ­polymerization with theoretical values. The light on–off experiments ­demonstrate that polymerizations are clearly initiated and moderated by either UV light or sunlight.

     

Palliative esophageal stent placement using endoscopic guidance without fluoroscopy

AIMS: Fluoroscopy is not available in every endoscopic unit. This situation leads to delays in treatment or to transfer of patients to other centres for stent insertion. We assessed safety and effectiveness of expandable esophageal metal stent placement under endoscopic control without fluoroscopy using a thin gastroscope. PATIENTS AND METHODS: From October 2002 to June 2004, thirty-three consecutive patients have been included for esophageal stent placement under endoscopic control alone with a nasogastroscope (5.9 mm). A proximal release covered stent (Ultraflex; Boston Scientific Microvasive) was used. Indications were malignant esophageal stricture (N = 26), malignant extrinsic compression (N = 2 ) and esophago-respiratory neoplastic fistulae (N = 5). RESULTS: Stent placement using endoscopic control alone was successful in 30/33 (90%) patients. Complications occurred in 11 patients. Early complications (<7 days) included one death from pulmonary embolism, severe retrosternal pain needing transient morphinic treatment (N = 2) and GERD despite antisecretory therapy (N = 1). Late complications included: food impaction (N = 1), tumour overgrowth-related obstruction of the stent (N = 5) and one late esophago-respiratory fistula at 4 months at the proximal end of the stent. Relief of dysphagia was obtained for all patients at 48 hours and dysphagia score decreased from 3.1 before stent to 1.2 at 1 month (P < 0.05). CONCLUSION: Expandable esophageal stents can be accurately and safely placed using endoscopy with a thin gastrosocope. This method obviates the requirement of fluoroscopic access, lacking in many centres, and avoids exposure to X-ray.     

Radial head,radiocapitellar and total elbow arthroplasties: A review of recent literature

The outcome of prosthetic elbow surgery is continually evolving. We thoroughly reviewed the literature on this issue to analyse the indications, outcomes and complications of the numerous types of implants currently in use. Radial head replacement is recommended in comminuted fractures of the radial head and in post-traumatic conditions. Medium- and long-term results prove to be satisfactory in the majority of cases, with no evidence to indicate that some prostheses (monopolar vs. bipolar; cemented vs. press-fit) are more effective than others; nonetheless, the bipolar-cemented implant was found to be associated with a lower revision rate than other prostheses. Unicompartmental arthroplasty has recently been used for the treatment of osteoarthritis and rheumatoid arthritis when the lateral compartment is prevalently involved; the results reported to date have been encouraging, although further studies are warranted to confirm the validity of these implants. Total elbow arthroplasty is performed in a range of conditions, including distal humerus fractures in the elderly and elbow arthritis. In the former condition, linked elbow replacement yields excellent results with few complications and a low revision rate. In elbow arthritis, total elbow arthroplasty is indicated when patients suffer from disabling pain, stiffness and/or instability that prevent them from performing daily activities. Unlinked elbow arthroplasty, which is used above all in rheumatoid arthritis, also yields satisfactory results, although the risk of instability persists. The use of linked elbow arthroplasty, which yields similar results but lower revision rates, has consequently increased. Lastly, the results yielded by linked elbow prosthesis in post-traumatic conditions are good, although not quite as good as those obtained in rheumatoid arthritis. Early mechanical failure may occur in younger and more active patients after elbow arthroplasty. However, the careful selection of patients who are prepared to accept functional limitations imposed by elbow implants will enable indications for elbow arthroplasty to be extended to young subjects, particularly when no other therapeutic options are available.     

Structure and dynamics of polyelectrolyte-surfactant complexes as revealed by solid state NMR

¹³C-CP/MAS-NMR (cross-polarization magic angle spinning), 2D-WISE (wideline separation experiment) and ¹H-spin diffusion experiments allow to gain new insight into the structure and dynamics of solid polyelectrolyte-surfactant complexes, a material with pronounced mesophase formation. Experiments were performed on two different complexes of polystyrene sulfonate and octadecyltrimethylammonium or tetradecyltrimethylammonium counterions, PSS-C₁₈ and PSS-C₁₄. The strong mobility differences between the ionic and alkyl phase in the lamellar complex PSS-C₁₈ are reflected in the NMR behavior: in the surfactant tails, a mobility gradient towards the terminal methyl group is observed. This fact as well as a high content of gauche conformations suggest a non-interdigitating morphology of the tails at room temperature. The behavior changes during cooling below an endothermic transition centered at 255 K where a high trans content and a homogenization of the side chain dynamics is observed. We attribute this transition which is invisible in the X-ray experiments to the formation of a highly transoid, interdigitated phase of the surfactant tails which is however not crystallized in a classical sense. ¹H-spin diffusion experiments allow to estimate the distance between mobile and immobile regions of the sample. For the complex PSS-C₁₄, the length scale determined by NMR is essentially that of the primary lamellar structure. For PSS-C₁₈, a characteristic length of the density fluctuations within the proposed undulated lamellar structure is estimated.