Überregionale Public-Health-Akteure in Deutschland – eine Bestandsaufnahme und Kategorisierung

Bundesgesundheitsblatt - Gesundheitsforschung - Gesundheitsschutz - Akteure der öffentlichen Gesundheit (Public Health) tragen wesentlich zu Gesundheitsschutz, -förderung und...     

Electronic health records and support for primary care teamwork

Objective Consensus that enhanced teamwork is necessary for efficient and effective primary care delivery is growing. We sought to identify how electronic health records (EHRs) facilitate and pose challenges to primary care teams as well as how practices are overcoming these challenges.Methods Practices in this qualitative study were selected from those recognized as patient-centered medical homes via the National Committee for Quality Assurance 2011 tool, which included a section on practice teamwork. We interviewed 63 respondents, ranging from physicians to front-desk staff, from 27 primary care practices ranging in size, type, geography, and population size.Results EHRs were found to facilitate communication and task delegation in primary care teams through instant messaging, task management software, and the ability to create evidence-based templates for symptom-specific data collection from patients by medical assistants and nurses (which can offload work from physicians). Areas where respondents felt that electronic medical record EHR functionalities were weakest and posed challenges to teamwork included the lack of integrated care manager software and care plans in EHRs, poor practice registry functionality and interoperability, and inadequate ease of tracking patient data in the EHR over time.Discussion Practices developed solutions for some of the challenges they faced when attempting to use EHRs to support teamwork but wanted more permanent vendor and policy solutions for other challenges.Conclusions EHR vendors in the United States need to work alongside practicing primary care teams to create more clinically useful EHRs that support dynamic care plans, integrated care management software, more functional and interoperable practice registries, and greater ease of data tracking over time.     

Evolutionary puzzle of Toxoplasma gondii with suicidal ideation and suicide attempts: An updated systematic review and meta‐analysis

The World Health Organization has reported an annual global suicide rate of 14.5 per 100,000 people. On the other hand, it is estimated that approximately one‐third of the global population are infected with Toxoplasma gondii (T. gondii) parasite. It is widely assumed that microbial pathogens, such as T. gondii, are probably associated with affective and behavioural modulation. The present article aimed to assess the proposed role of toxoplasmosis in raising the risk of suicidal ideation (SI) and suicide attempts (SA) using the available epidemiological data. Seven major electronic databases and the Internet search engine Google were searched for all the studies published between the 1st of January 1950 and 31st of October 2019. The heterogeneity and the risk of bias within and across studies were assessed. Following data extraction, pooled odds ratios (ORs) with 95% confidence interval (CI) across studies were calculated using the random‐effects models. A total number of 9,696 articles were screened and 27 studies were regarded as eligible in our systematic review (SI with five papers and 22 papers on SA). A significant association was detected between antibodies against T. gondii with TA (ORs = 1.57; 95% confidence interval [CI] 1.23–2.00, p = .000). Exploration of the association between T. gondii and SA yielded a positive effect of seropositivity for IgG antibodies but not IgM. Despite the limited number of studies, a statistical association was detected between suicidal behaviours and infection with latent T. gondii.     

The effect of palytoxin on neuromuscular junctions in the anococcygeus muscle of the rat

Palytoxin, a highly toxic natural product isolated from zoanthids of the genus Palythoa, is accumulated by a wide range of fishes and marine invertebrates used as food in the Indo-Pacific. It is responsible for many incidents of human morbidity and mortality. The toxin is a potent smooth muscle spasmogen. The cause of the contraction of smooth muscle is unclear, but recent work strongly suggests that it is primarily initiated by the release of neurotransmitters from the motor innervation of the smooth muscle. We show here that palytoxin caused the swelling of the muscle cells and some internal organelles of the anococcygeus muscle of the rat, but no substantial structural damage to the tissue. Axons and Schwann cells were also swollen but the most dramatic feature was the depletion of synaptic vesicles from putative release sites in the axons. Some axons were physically damaged following exposure to the toxin, but this was relatively uncommon (<10% of all axons studied). In the majority of axons there was no damage to nerve terminal membranes, but there was damage to mitochondria. The depletion of vesicles involved all types – clear, dense-cored, large and small. Our observations and pharmacological data gathered elsewhere, provide a neuropathological basis for the spasmogenic activity of palytoxin.     

Screw angulation affects bone-screw stresses and bone graft load sharing in anterior cervical corpectomy fusion with a rigid screw-plate construct: a finite element model study

Background contextAnterior corpectomy and reconstruction with bone graft and a rigid screw-plate construct is an established procedure for treatment of cervical neural compression. Despite its reliability in relieving symptoms, there is a high rate of construct failure, especially in multilevel cases.PurposeThere has been no study evaluating the biomechanical effects of screw angulation on construct stability; this study investigates the C4–C7 construct stability and load-sharing properties among varying screw angulations in a rigid plate-screw construct.Study designA finite element model of a two-level cervical corpectomy with static anterior cervical plate.MethodsA three-dimensional finite element (FE) model of an intact C3–T1 segment was developed and validated. From this intact model, a fusion model (two-level [C5, C6] anterior corpectomy) was developed and validated. After corpectomy, allograft interbody fusion with a rigid anterior screw-plate construct was created from C4 to C7. Five additional FE models were developed from the fusion model corresponding to five different combinations of screw angulations within the vertebral bodies (C4, C7): (0°, 0°), (5°, 5°), (10°, 10°), (15°, 15°), and (15°, 0°). The fifth fusion model was termed as a hybrid fusion model.ResultsThe stability of a two-level corpectomy reconstruction is not dependent on the position of the screws. Despite the locked screw-plate interface, some degree of load sharing is transmitted to the graft. The load seen by the graft and the shear stress at the bone-screw junction is dependent on the angle of the screws with respect to the end plate. Higher stresses are seen at more divergent angles, particularly at the lower level of the construct.ConclusionThis study suggests that screw divergence from the end plates not only increases load transmission to the graft but also predisposes the screws to higher shear forces after corpectomy reconstruction. In particular, the inferior screw demonstrated larger stress than the upper-level screws. In the proposed hybrid fusion model, lower stresses on the bone graft, end plates, and bone-screw interface were recorded, inferring lower construct failure (end-plate fractures and screw pullout) potential at the inferior construct end.     

Linear and angular measurements of computer-generated models: are they accurate, valid, and reliable?

INTRODUCTION: Traditional advanced imaging modalities such as CT and MRI are limited in their ability to perform accurate linear distance and angular measurements regardless of anatomical orientation. The construction of 3D models has been used to perform anthropometric analyses as well as in the reconstruction of rapid prototypes. We hypothesized that such measurements would be precise to within 2 mm or 2 degrees of measurements performed with a coordinate measurement machine (CMM). We also hypothesized that there would be a high degree of interobserver reliability with these measurements. MATERIALS AND METHODS: Multiple aluminum screws were implanted in various positions in three foam pelvises which were subsequently scanned by CT and rendered as 3D models using a commercially available software package (Mimics). Linear and angular measurements were performed using a CMM machine, the software package, and a dial caliper or goniometer. The deviation of the measurements from the CMM data was compared using ANOVA. The interobserver reliability of both the manual and computer-generated measurements was calculated. RESULTS: The mean difference between the CMM distances and those measured manually and with the software was 2.12 +/- 1.20 mm and 1.57 +/- 1.05 mm, respectively. The mean difference between the CMM angular measurements and the angular measurements performed manually and with the software was 4.07 +/- 4.70 degrees and 1.62 +/- 1.32 degrees, respectively. In all cases, the manual measurements were significantly less accurate (p < 0.0001) and there was a high degree of interobserver reliability. CONCLUSIONS: Computer-generated measurements taken from three-dimensionally reconstructed models are more accurate than manual measurements and are within 2 mm and 2 degrees of measurements performed with a CMM. These measurements have high interobserver reliability.     

It's all about sex: gender, lung development and lung disease.

Accumulating evidence suggests that gender affects the incidence, susceptibility and severity of several lung diseases. Gender also influences lung development and physiology. Data from both human and animal studies indicate that sex hormones might contribute to disease pathogenesis or serve as protective factors, depending on the disease involved. In this review, the influence of gender and sex hormones on lung development and pathology will be discussed, with specific emphasis on pulmonary fibrosis, asthma and cancer.     

Rapid detection of the factor XIII Val34Leu (163 G-->T) polymorphism by real-time PCR using fluorescence resonance energy transfer detection and melting curve analysis.

The Val34Leu polymorphism in the A subunit of blood coagulation factor XIII (FXIII-A) is located in the activation peptide, just three amino acids upstream of the thrombin cleavage site. The Val-->Leu replacement accelerates the rate of the proteolytic activation of FXIII and it seems to provide protection against myocardial infarction. Methods available for the assessment of the FXIII-A Val34Leu polymorphism are rather time-consuming, laborious and not easily applicable for large-scale studies. In this study a new method based on real-time PCR with fluorescence resonance energy transfer (FRET) detection and melting curve analysis was developed. The rapid, simple method was adapted to the widely used real-time PCR instrument, LightCycler (Roche Diagnostics). The results showed 100% coincidence with those obtained by the traditional PCR-restriction fragment length polymorphism (RFLP) assay and fluorescent DNA sequencing. Using this method, an allele frequency of 24.2% was obtained (n=113), which well agrees with the allele frequency obtained by PCR-RFLP on a different group of the same ethnic Hungarian population (25.9%).