Microarray-based comparative genomic analyses of the human malaria parasite Plasmodium falciparum using Affymetrix arrays

Microarray-based comparative genomic hybridization (CGH) provides a powerful tool for whole genome analyses and the rapid detection of genomic variation that underlies virulence and disease. In the field of Plasmodium research, many of the parasite genomes that one might wish to study in a high throughput manner are not laboratory clones, but clinical isolates. One of the key limitations to the use of clinical samples in CGH, however, is the miniscule amounts of genomic DNA available. Here we describe the successful application of multiple displacement amplification (MDA), a non-PCR-based amplification method that exhibits clear advantages over all other currently available methods. Using MDA, CGH was performed on a panel of NF54 and IT/FCR3 clones, identifying previously published deletions on chromosomes 2 and 9 as well as polymorphism in genes associated with disease pathology.     

Targeting the ERAD pathway via inhibition of signal peptide peptidase for antiparasitic therapeutic design

Early secretory and endoplasmic reticulum (ER)-localized proteins that are terminally misfolded or misassembled are degraded by a ubiquitin- and proteasome-mediated process known as ER-associated degradation (ERAD). Protozoan pathogens, including the causative agents of malaria, toxoplasmosis, trypanosomiasis, and leishmaniasis, contain a minimal ERAD network relative to higher eukaryotic cells, and, because of this, we observe that the malaria parasite Plasmodium falciparum is highly sensitive to the inhibition of components of this protein quality control system. Inhibitors that specifically target a putative protease component of ERAD, signal peptide peptidase (SPP), have high selectivity and potency for P. falciparum. By using a variety of methodologies, we validate that SPP inhibitors target P. falciparum SPP in parasites, disrupt the protein’s ability to facilitate degradation of unstable proteins, and inhibit its proteolytic activity. These compounds also show low nanomolar activity against liver-stage malaria parasites and are also equipotent against a panel of pathogenic protozoan parasites. Collectively, these data suggest ER quality control as a vulnerability of protozoan parasites, and that SPP inhibition may represent a suitable transmission blocking antimalarial strategy and potential pan-protozoan drug target.     

Bacterial genome reduction using the progressive clustering of deletions via yeast sexual cycling

The availability of genetically tractable organisms with simple genomes is critical for the rapid, systems-level understanding of basic biological processes. Mycoplasma bacteria, with the smallest known genomes among free-living cellular organisms, are ideal models for this purpose, but the natural versions of these cells have genome complexities still too great to offer a comprehensive view of a fundamental life form. Here we describe an efficient method for reducing genomes from these organisms by identifying individually deletable regions using transposon mutagenesis and progressively clustering deleted genomic segments using meiotic recombination between the bacterial genomes harbored in yeast. Mycoplasmal genomes subjected to this process and transplanted into recipient cells yielded two mycoplasma strains. The first simultaneously lacked eight singly deletable regions of the genome, representing a total of 91 genes and ∼10% of the original genome. The second strain lacked seven of the eight regions, representing 84 genes. Growth assay data revealed an absence of genetic interactions among the 91 genes under tested conditions. Despite predicted effects of the deletions on sugar metabolism and the proteome, growth rates were unaffected by the gene deletions in the seven-deletion strain. These results support the feasibility of using single-gene disruption data to design and construct viable genomes lacking multiple genes, paving the way toward genome minimization. The progressive clustering method is expected to be effective for the reorganization of any mega-sized DNA molecules cloned in yeast, facilitating the construction of designer genomes in microbes as well as genomic fragments for genetic engineering of higher eukaryotes.Complexities of natural biological systems make it difficult to understand and define precisely the roles of individual genes and their integrated functions. The use of model organisms with a relatively small number of genes enables the isolation of core biological processes from their complex regulatory networks for extensive characterization. However, even the simplest natural microbes contain many genes of unknown function, as well as genes that can be singly or simultaneously deleted without any noticeable effect on growth rate in a laboratory setting (Hutchison et al. 1999; Glass et al. 2006; Posfai et al. 2006). Ill-defined genes and those mediating functional redundancies both compound the challenge of understanding even the simplest life forms.Toward generating a minimal cell where every gene is essential for the axenic viability of the organism, we are pursuing strategies to reduce the 1-Mb genome of Mycoplasma mycoides JCVI-syn1.0 (Gibson et al. 2010). Because we can (1) introduce this genome into yeast and maintain it as a plasmid (Benders et al. 2010; Karas et al. 2013a); and (2) “transplant” the genome from yeast into mycoplasma recipient cells (Lartigue et al. 2009), genetic tools in yeast are available for reducing this bacterial genome. Several systems offer advanced tools for bacterial genome engineering. Here we further exploit distinctive features of yeast for this purpose.Methods for serially replacing genomic regions with selectable markers are limited by the number of available markers. One effective approach is to reuse the same marker after precise and scarless marker excision (Storici et al. 2001). We have previously used a self-excising marker (Noskov et al. 2010) six times in yeast to generate a JCVI-syn1.0 genome lacking all six restriction systems (JCVI-syn1.0 ∆1-6) (Karas et al. 2013a). Despite the advantages of scarless engineering, sequential procedures are time-consuming. When applied to poorly characterized genes with the potential to interact with other genes, some paths for multigene knockout may lead to dead ends that result from synergistic mutant phenotypes. When a dead end is reached, sequentially returning to a previous genome in an effort to find a detour to a viable higher-order multimutant may be prohibitively time-consuming.An alternative approach to multigene engineering, available in yeast, is to prepare a set of single mutants and combine the deletions into a single strain via cycles of mating and meiotic recombination (Fig. 1A; Pinel et al. 2011; Suzuki et al. 2011, 2012). With a green fluorescent protein (GFP) reporter gene inserted in each deletion locus, the enrichment of higher-order yeast deletion strains in the meiotic population can be accomplished using flow cytometry. Here we apply this method to the JCVI-syn1.0 ∆1-6 exogenous, bacterial genome harbored in yeast to nonsequentially assemble deletions for genes predicted to be individually deletable based on biological knowledge or transposon-mediated disruption data. The functional identification of simultaneously deletable regions is expected to accelerate the effort to construct a minimal genome.Open in a separate windowFigure 1.Progressive clustering of deleted genomic segments. (A) Scheme of the method. Light blue oval represents a bacterial cell. Black ring or horizontal line denotes a bacterial genome, with the orange box indicating the yeast vector used as a site for linearization and recircularization. Gray shape denotes a yeast cell. Green dot in the genome indicates a deletion replaced with a GFP marker. (B) Map of deleted regions. Orange box indicates the yeast vector sequence used for genome linearization and recircularization. Green boxes indicate regions deleted in multimutant mycoplasma strains. Blue boxes denote restriction modification (RM) systems that are also deleted in the strains. (C) Pulsed-gel electrophoresis result for deleted genomes. The starting strain was the JCVI-syn1.0 ∆1–6 strain (1062 kb). Two strains were analyzed for each design of simultaneous deletion (962 kb for eight-deletion or 974 kb for seven-deletion genome). Ladder is a set of yeast chromosomes (New England BioLabs). (D) GFP-RFP ratio sorting result. Standard sorting was compared with sorting based on a GFP-RFP ratio (Methods).     

The effect of glucose dynamics on plasma copeptin levels upon glucagon,arginine, and macimorelin stimulation in healthy adults

Pituitary - Non-osmotic stimulation tests using glucagon, arginine, or macimorelin were recently evaluated for their ability to assess posterior pituitary function. Glucagon and arginine, but not...     

Effects of lethal irradiation in zebrafish and rescue by hematopoietic cell transplantation

The study of hematopoiesis has been greatly facilitated by transplantation of blood cell populations into recipient animals. Efficient engraftment of donor cells generally requires ablation of the host hematopoietic system. The zebrafish has recently emerged as a developmental and genetic system to study hematopoiesis. To enable the study of hematopoietic stem cell (HSC) biology, immune cell function, and leukemogenesis in zebrafish, we have developed hematopoietic cell transplantation (HCT) into adult recipient animals conditioned by gamma irradiation. Dose-response experiments showed that the minimum lethal dose (MLD) of 40 Gy led to the specific ablation of hematolymphoid cells and death by 14 days after irradiation. Sublethal irradiation doses of 20 Gy predominantly ablated lymphocytes and permitted transplantation of a lethal T-cell leukemia. Finally, transplantation of hematopoietic cells carrying transgenes yielding red fluorescent erythrocytes and green fluorescent leukocytes showed that HCT is sufficient to rescue the MLD, that recipient hematolymphoid tissues were repopulated by donor-derived cells, and that donor blood cell lineages can be independently visualized in living recipients. Together, these results establish transplantation assays to test for HSC function and oncogenic transformation in zebrafish.     

Large-scale identification of single-feature polymorphisms in complex genomes

We have developed a high-throughput genotyping platform by hybridizing genomic DNA from Arabidopsis thaliana accessions to an RNA expression GeneChip (AtGenome1). Using newly developed analytical tools, a large number of single-feature polymorphisms (SFPs) were identified. A comparison of two accessions, the reference strain Columbia (Col) and the strain Landsberg erecta (Ler), identified nearly 4000 SFPs, which could be reliably scored at a 5% error rate. Ler sequence was used to confirm 117 of 121 SFPs and to determine the sensitivity of array hybridization. Features containing sequence repeats, as well as those from high copy genes, showed greater polymorphism rates. A linear clustering algorithm was developed to identify clusters of SFPs representing potential deletions in 111 genes at a 5% false discovery rate (FDR). Among the potential deletions were transposons, disease resistance genes, and genes involved in secondary metabolism. The applicability of this technique was demonstrated by genotyping a recombinant inbred line. Recombination break points could be clearly defined, and in one case delimited to an interval of 29 kb. We further demonstrate that array hybridization can be combined with bulk segregant analysis to quickly map mutations. The extension of these tools to organisms with complex genomes, such as Arabidopsis, will greatly increase our ability to map and clone quantitative trait loci (QTL).