Discordant Electrocardiogram Left Ventricular Wall Thickness and Strain Findings in Influenza Myocarditis

A 42‐year‐old man presented with a viral prodrome and tested positive for influenza A. He rapidly deteriorated developing cardiogenic shock, rhabdomyolysis, and acute kidney injury. Patient improved 1 week later with supportive measures including vasopressors, inotropes, and an intraaortic balloon pump. We report this case as it highlights the discordance between echocardiographic ventricular wall thickening as a result of myocardial edema, and electrocardiographic findings at presentation, with a reversal in findings at time of resolution. Additionally, there was some suggestion of a regional pattern to the reduced longitudinal strain.     

Inter-ictal assay of peripheral circulating inflammatory mediators in migraine patients under adjunctive cervical non-invasive vagus nerve stimulation (nVNS): A proof-of-concept study

Objective

To assay peripheral inter-ictal cytokine serum levels and possible relations with non-invasive vagus nerve stimulation (nVNS) responsiveness in migraineurs.

Screw angulation affects bone-screw stresses and bone graft load sharing in anterior cervical corpectomy fusion with a rigid screw-plate construct: a finite element model study

Background contextAnterior corpectomy and reconstruction with bone graft and a rigid screw-plate construct is an established procedure for treatment of cervical neural compression. Despite its reliability in relieving symptoms, there is a high rate of construct failure, especially in multilevel cases.PurposeThere has been no study evaluating the biomechanical effects of screw angulation on construct stability; this study investigates the C4–C7 construct stability and load-sharing properties among varying screw angulations in a rigid plate-screw construct.Study designA finite element model of a two-level cervical corpectomy with static anterior cervical plate.MethodsA three-dimensional finite element (FE) model of an intact C3–T1 segment was developed and validated. From this intact model, a fusion model (two-level [C5, C6] anterior corpectomy) was developed and validated. After corpectomy, allograft interbody fusion with a rigid anterior screw-plate construct was created from C4 to C7. Five additional FE models were developed from the fusion model corresponding to five different combinations of screw angulations within the vertebral bodies (C4, C7): (0°, 0°), (5°, 5°), (10°, 10°), (15°, 15°), and (15°, 0°). The fifth fusion model was termed as a hybrid fusion model.ResultsThe stability of a two-level corpectomy reconstruction is not dependent on the position of the screws. Despite the locked screw-plate interface, some degree of load sharing is transmitted to the graft. The load seen by the graft and the shear stress at the bone-screw junction is dependent on the angle of the screws with respect to the end plate. Higher stresses are seen at more divergent angles, particularly at the lower level of the construct.ConclusionThis study suggests that screw divergence from the end plates not only increases load transmission to the graft but also predisposes the screws to higher shear forces after corpectomy reconstruction. In particular, the inferior screw demonstrated larger stress than the upper-level screws. In the proposed hybrid fusion model, lower stresses on the bone graft, end plates, and bone-screw interface were recorded, inferring lower construct failure (end-plate fractures and screw pullout) potential at the inferior construct end.     

Isolated profunda femoris insufficiency

Because of rich anastomotic network profunda femoris artery is an important link between iliac and superficial femoral/popliteal circulation and thus isolated insufficiency of profunda is rare. It happened in the case reported herein when patient's own native common femoral artery and its bifurcation was excluded by aorto-femoral and femoro-popliteal bypass graft. Revasculatization of profunda ameliorated the problem.     

Capillary gas chromatographic assay of camphor and m-cresol in dermatological creams

Camphor and m-cresol mixtures are used in antiseptic and anti-itching creams. No compendial method exists for these preparations. This paper reports a capillary gas chromatographic method using FID detection with 2,6-di-tert-butyl-4-methylphenol as internal standard on a 30 m×0.32 mm Supelcowax®-10 column (0.25 μm film) with helium as carrier gas. Ramped temperature programming was applied. The method allows simultaneous quantitation of camphor and m-cresol in the presence of o- and p-cresols, calamine and zinc oxide. Overall percent recoveries (±SD, n=9) of camphor, o-, p- and m-cresol from spiked placebo creams, at a labeled amount of 10 (w/w)% were 96.9±0.6, 98.2±0.6, 99.2±0.5 and 101.0±0.9%, respectively, and at a labeled amount of 1% were 96.7±0.6, 97.8±0.9, 97.8±0.6, and 100.3±1.0%, respectively. The recovery studies were carried out at ±30% of the labeled amounts. Linear peak area or height ratios were obtained (r>0.999) for camphor, o-, p- and m-cresol covering a concentration range of 10–200% of the labeled amount. Linearity (r>0.999) was also obtained for m-cresol when the relative concentration of o- and p-cresol was varied from 5 to 100% of the m-cresol concentration. The resolution between the ‘critical pair’ of p- and m-cresol was ≥1.1. The limit of quantitation was 23 pg for m-cresol and 9.3 pg for camphor using an injection split of 1:50. The repeatability (%RSD) for all compounds were <2% for peak area and <1.4% for peak height ratios. System suitability and robustness of the method were established. The method was successively applied to the assay of available commercial products and allows assay of camphor and the three cresol isomers.