“三全育人”视角下思政教育机制实践与探索——“杏林成长导师”计划的构建

“三全育人”是高校思政教育工作的关键一环，也是中医药高校推动思政教育的重要内容。以“三全育人”为视角对北京中医药大学思想政治教育举措“杏林成长导师”计划路径、内容深入分析，运用统计分析和文献研究方法，剖析该计划对中医学专业大学生的学业、思想和实践等多个层面的现实成效，从而为“三全育人”理念在中医药院校制度建构中的应用提供新的视角与方法。     

Venetoclax alone or in combination with other regimens treatment achieve deep and sustained remission of relapsed/refractory chronic lymphocytic leukemia: a meta-analysis

Clinical and Experimental Medicine - Recently, the use of novel targeted drugs significantly improved the overall response rate (ORR) and survival of patients with relapsed/refractory chronic...     

安宁疗护对社区临终患者生活质量影响的Meta分析

目的通过Meta分析评价安宁疗护对社区临终患者生活质量的影响。方法计算机检索PubMed、CINAHL、ScienceDirect、MEDLINE、Cochrane Library、SAGE数据库、中国知网、维普中文科技期刊数据库、万方数据库和中国生物医学文献数据库中安宁疗护对社区临终患者的随机对照试验,由2名研究人员独立筛选文献并提取资料,对符合质量标准的随机对照试验进行Meta分析。结果共纳入7篇文献,包括1095名社区临终患者。Meta分析结果显示,安宁疗护可以改善社区临终患者的总体生活质量(SMD=0.48,95%CI0.07~0.88,P=0.02)和情绪功能(SMD=1.27,95%CI0.59~1.95,P<0.001),在改善生活质量的躯体功能、角色功能、认知功能和社会功能水平上差异无统计学意义(P>0.05)。结论安宁疗护能改善社区临终患者的总体生活质量和情绪功能,但对生活质量其他功能的改善情况还需要设计更加规范、多中心、大样本的随机对照试验进一步证实。     

中药生产过程质量控制关键技术研究进展

中医药发展已上升到国家战略层面,在医药行业贯彻实施"中国制造2025"战略的新形势下,中药生产过程质量控制是中药工业需要加快突破的关键领域之一。对中药生产过程质量控制领域在工艺设计、分析检测、过程建模、制造装备等方面的关键共性问题进行解析,综述了中药生产过程质量控制体系中工艺过程理解、生产过程实时分析方法开发、过程控制策略建立3个方面的研究进展;并结合企业研究实践,介绍了质量源于设计(quality by design,Qb D)、过程分析技术(process analytical technology,PAT)、实验设计(design of experiment,DOE)、多变量统计分析等关键技术在上述3个研究方向中的应用进展,分析了实际工业应用的难点问题并对其应用前景进行展望,旨在为中药企业应用和提升生产过程质量控制技术提供参考。     

Direct insertion of an ultra‐slim upper endoscope for cholangioscopy in patients undergoing choledochoduodenostomy

Direct peroral cholangioscopy (POC) using an ultra‐slim upper endoscope is one modality of POC for intraductal endoscopic evaluation and treatment of the bile duct. Choledochoduodenostomy (CDS) is one modality of biliary bypass surgery that provides a new route to the bile duct. We carried out direct POC using an ultra‐slim upper endoscope without the use of accessories in 10 patients (four sump syndromes, three bile duct strictures and three intrahepatic duct stones) previously undergoing surgical CDS. Direct POC was successful in all patients. The use of an intraductal balloon catheter was required in one patient for advancement of the endoscope into the bile duct. Distal bile ducts with sump syndromes were cleared using baskets and water irrigation under direct POC. Cholangiocarcinoma was diagnosed in one patient with hilar bile duct stricture after cholangioscopic evaluation and a targeting forceps biopsy under direct POC. Intrahepatic duct stones were successfully extracted after intraductal fragmentation under direct POC. Oozing bleeding occurred during intraductal lithotripsy but stopped spontaneously. Direct POC using an ultra‐slim upper endoscope without the assistance of accessories can easily be carried out in patients undergoing CDS.     

Utility of Tissue Similarity Maps Based on Relative Cerebral Blood Volume for Grading Gliomas as Validated by Histological Results

@@     

Optimal tracking control for non-zero-sum games of linear discrete-time systems via off-policy reinforcement learning

In this article, a model-free off-policy reinforcement learning algorithm is applied to address the optimal tracking problem based on multiplayer non-zero-sum games for discrete-time linear systems. In contrast to the traditional method and the policy iteration method for solving the optimal tracking problems, the proposed algorithm operates with the system data rather than the knowledge of the system dynamics. For performing the proposed algorithm, an auxiliary augmented system is constructed via assembling the original system and the reference trajectory while a discount factor is introduced into the performance indexes. It is analyzed that the solutions of the proposed algorithm converge to the Nash equilibrium and the result is not influenced by the probing noise. Two simulations are presented to verify the feasibility and effectiveness of the proposed algorithm.     

Hypocholesterolaemic mechanism of bitter melon aqueous extracts via inhibition of pancreatic cholesterol esterase and reduction of cholesterol micellar solubility

This study investigated the hypocholesterolaemic effects of bitter melon aqueous extracts (BMAE) in vitro, the inhibitory effects of BMAE on pancreatic cholesterol esterase (CEase) and incorporation of cholesterol into micelles were investigated. BMAE decreased the in vitro micellar solubility of cholesterol in a dose-dependent manner. The conformation of CEase was investigated by means of circular dichroism (CD) and fluorescence. The result revealed the decrease of α-helix contents, increase of β-sheet and exposure of aromatic amino acid residuals. The incorporation of cholesterol into micelles was inhibited by BMAE. A complex was observed by transmission electron microscopy (TEM), which indicated interaction between cholesterol and BMAE. The result revealed that BMAE can play a role in decreased intestinal cholesterol absorption via inhibition of CEase, and of micelle formation.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.