Why is the age-standardized incidence of low-trauma fractures rising in many elderly populations?

Low-trauma fractures of elderly people are a major public health burden worldwide, and as the number and mean age of older adults in the population continue to increase, the number of fractures is also likely to increase. Epidemiologically, however, an additional concern is that, for unknown reasons, the age-standardized incidence (average individual risk) of fracture has also risen in many populations during the recent decades. Possible reasons for this rise include a birth cohort effect, deterioration in the average bone strength by time, and increased average risk of (serious) falls. Literature provides evidence that the rise is not due to a birth cohort effect, whereas no study shows whether bone fragility has increased during this relatively short period of time. This osteoporosis hypothesis could, however, be tested if researchers would now repeat the population measurements of bone mass and density that were made in the late 1980s and the 1990s. If such studies proved that women's and men's age-standardized mean values of bone mass and density have declined over time, the osteoporosis hypothesis would receive scientific support. The third explanation is based on the hypothesis that the number and/or severity of falls has risen in elderly populations during the recent decades. Although no study has directly tested this hypothesis, a great deal of indirect epidemiologic evidence supports this contention. For example, the age-standardized incidence of fall-induced severe head injuries, bruises and contusions, and joint distortions and dislocations has increased among elderly people similarly to the low-trauma fractures. The fall hypothesis could also be tested in the coming years because the 1990s saw many research teams reporting age- and sex-specific incidences of falling for elderly populations, and the same could be done now to provide data comparing the current incidence rates of falls with the earlier ones.     

Fracture repair during external fixation: Torsion tests of rabbit osteotomies

Bone repair was studied in the rabbit tibiofibular bone after a midshaft transverse osteotomy stabilized by external fixation and heavy compression. Both subendosteal and subperiosteal callus formation with concomitant contact healing were observed within 3 weeks, and were further succeeded by subendosteal resorption and increased porosis resulting in atrophy of the cortical bone. Subjected to the torsion test, the bones exhibited restoration of strength within 3 weeks, with maximal energy absorption and elasticity at 6 weeks. The failure of the osteotomy in the torsion test, with radiographic visibility of the osteotomy, characterized the soft-tissue type of behavior of the bones. Hard-tissue like behaviour of the bones with resistance to torsion at the osteotomy site and radiographic obliteration of the osteotomy line occurred by 12 weeks, indicating complete union of the osteotomy. Our experiments demonstrate that elastic external fixation is preferable to the rigid compression plate.     

Cost-effectiveness analysis of guidelines for antihypertensive care in Finland

Background  

Hypertension is one of the major causes of disease burden affecting the Finnish population. Over the last decade, evidence-based care has emerged to complement other approaches to antihypertensive care, often without health economic assessment of its costs and effects. This study looks at the extent to which changes proposed by the 2002 Finnish evidence-based Current Care Guidelines concerning the prevention, diagnosis, and treatment of hypertension (the ACCG scenario) can be considered cost-effective when compared to modelled prior clinical practice (the PCP scenario).     

Increased GABAergic transmission aggravates nucleus basalis magnocellularis lesion-induced behavioral deficits

Quisqualic acid NBM lesions had no effect on water maze performance, but slightly impaired passive avoidance acquisition. GammavinylGABA treatment alone had no effect on the passive avoidance and water maze performance, but aggravated acquisition deficit in rats subjected to NBM lesioning. However, gammavinylGABA-treated NBM-lesioned rats reached control level of performance.     

The association of sensitive systemic inflammation markers with bronchial asthma.

BACKGROUND: Airway inflammation is a characteristic feature of bronchial asthma. Previous studies have shown an increased local inflammatory activity in the airway mucosa of asthma patients. OBJECTIVES: To analyze the association of asthma with three sensitive markers of systemic inflammation, C-reactive protein, serum amyloid-A (SAA), and plasma fibrinogen. METHODS: A cross-sectional, population-based study including 1,513 Finnish men aged 45 to 74 years, who participated in a chronic disease risk factor survey in 1997. Of the participating men, 97 were classified as asthma patients. The odds ratios of asthma were analyzed by quartile of each inflammation marker. RESULTS: In logistic regression models the age-adjusted odds ratios (second, third, and fourth quartile as compared with the first quartile) of asthma increased gradually with increasing quartile of C-reactive protein (1.28, 1.19, 1.96, P for trend = 0.039), SAA (1.20, 3.00, 3.49, P for trend < 0.001), and fibrinogen (1.22, 1.79, 3.16, P for trend < 0.001). The associations were independent of smoking. Further adjustment for waist-to-hip ratio, a marker of central obesity, and symptoms of chronic bronchitis weakened the observed association, but the increasing trend in the association of SAA and fibrinogen with asthma remained highly significant. CONCLUSIONS: Sensitive markers of systemic inflammation, particularly SAA and fibrinogen, were positively and significantly associated with asthma prevalence. These findings support the hypothesis that not only local, but also systemic, inflammation exist in bronchial asthma.     

Effect of surface conditioning methods on the bond strength of luting cement to ceramics

OBJECTIVES: This study evaluated the effect of three different surface conditioning methods on the bond strength of a Bis-GMA based luting cement to six commercial dental ceramics. METHODS: Six disc shaped ceramic specimens (glass ceramics, glass infiltrated alumina, glass infiltrated zirconium dioxide reinforced alumina) were used for each test group yielding a total number of 216 specimens. The specimens in each group were randomly assigned to one of the each following treatment conditions: (1) hydrofluoric acid etching, (2) airborne particle abrasion, (3) tribochemical silica coating. The resin composite luting cement was bonded to the conditioned and silanized ceramics using polyethylene molds. All specimens were tested at dry and thermocycled (6.000, 5-55 degrees C, 30 s) conditions. The shear bond strength of luting cement to ceramics was measured in a universal testing machine (1 mm/min). RESULTS: In dry conditions, acid etched glass ceramics exhibited significantly higher results (26.4-29.4 MPa) than those of glass infiltrated alumina ceramics (5.3-18.1 MPa) or zirconium dioxide (8.1 MPa) (ANOVA, P<0.001). Silica coating with silanization increased the bond strength significantly for high-alumina ceramics (8.5-21.8 MPa) and glass infiltrated zirconium dioxide ceramic (17.4 MPa) compared to that of airborne particle abrasion (ANOVA, P<0.001). Thermocycling decreased the bond strengths significantly after all of the conditioning methods tested. SIGNIFICANCE: Bond strengths of the luting cement tested on the dental ceramics following surface conditioning methods varied in accordance with the ceramic types. Hydrofluoric acid gel was effective mostly on the ceramics having glassy matrix in their structures. Roughening the ceramic surfaces with air particle abrasion provided higher bond strengths for high-alumina ceramics and the values increased more significantly after silica coating/silanization.     

Damage mechanics and load failure of fiber-reinforced composite fixed partial dentures

OBJECTIVES: Damage mechanics has been defined as the study of the initiation (initial failure) and accumulation of damage to and including rupture (final failure). This study was designed to evaluate the effect of increasing fiber-reinforced composite (FRC) substructure within a standardized fixed partial denture (FPD) model on the failure performance, in terms of damage mechanics. METHODS: The two FRC restorative systems, Targis/Vectris (TV) (Ivoclar Vivadent) and EverStick (ES) (Stick Tech with Gradia, GC Corp.), were used to restore the molar FPD model (1.5 mm axial and 2.0 mm occlusal reduction). Templates were used to standardize substructure designs with 0, 18, 43, and 66% cross-sectional FRC volume fraction (V(FRC)) of fiber substructure. Specimens (n = 5) were homogenized at 29 points and stored for 1 week at 37 degrees C in distilled water. Specimens were luted with calcium hydroxide, then statically loaded until failure. Initial failure (IF), final failure (FF) and the mode of failure were recorded. RESULTS: The lowest mean load to initial failure was 530 N (TV 18%) and the highest was 1208 N (ES 66%). Linear regression analysis calculated the Pearson's correlation coefficient (r) for the interactions between V(FRC) and IF (ES: r = 0.7879, TV: r = 0.6184), V(FRC) and FF (ES: r = 0.912, TV: r = 0.8152), and between IF and FF (ES: r = 0.892, TV: r = 0.7237). Unreinforced specimens universally fractured instantaneously. SIGNIFICANCE: The highest loads to initial and final failure were yielded by specimens with the highest cross-sectional V(FRC).     

Continuous pleural lavage may decrease postoperative morbidity in patients undergoing thoracotomy for stage 2 thoracic empyema.

OBJECTIVE: To assess the impact of postoperative continuous pleural lavage (PCPL) after thoracotomy for the treatment of stage 2 pleural empyema in relation to postoperative length of stay and morbidity. METHODS: Stage 2 pleural empyema was diagnosed with computer tomography. Conservative treatment including antibiotics and pleural aspiration was introduced. 89 patients treated for stage 2 pleural empyema by thoracotomy, pleural discharge evacuation and irrigation after pleural decortication were identified after unsuccessful conservative treatment for 10 days. Whenever pleural discharge remained opaque after operation, PCPL was administered daily through the cranial chest tube and discharge evacuated through the caudal pleural suction (10-15 mmHg) tube. Risk factors related to pleural pus and patient outcome were sought for. RESULTS: Seventy-seven out of 89 patients (86.5%) had clear empyema discharge immediately after pleural decortication and irrigation. Pleural discharge remained opaque despite surgery in 12 out of 89 patients (13.5%) and PCPL was introduced. Presence of a combination of risk factors for pleural empyema, such as dental caries, alcohol abuse or previous inflammatory reaction, was predictive for persistence of opaque pleural discharge after operation (P<0.05). Need for re-thoracotomies (in 11 cases, P=ns) and postoperative deaths (P<0.05) were related with patients who did not have PCPL. The length of the hospital treatment was 20.1+/-3.1 (days+/-SEM) among patients with PCPL and 19.2+/-1.8 without PCPL before possible re-thoracotomy, respectively (P=ns). CONCLUSIONS: Early postoperative (1 day-11 months) mortality was statistically associated with patients having fibrinopurulent empyema but no PCPL. PCPL is a feasible method to clear pleural pus discharge without prolongation of hospitalization and may be recommended after thoracotomy for patients with fibrinopurulent stage 2 empyema.