Energy-selective neutron radiography and tomography at FRM.

At the reactor FRM at Technical University of Munich energy-selective neutron radiography and tomography experiments were performed. For an energy separation of the neutrons from the primary beam a mechanical velocity selector was used. The radiography images show a different contrast of the investigated elements for neutron energies below and above their Bragg-cutoff energy. A comparison between the standard and energy-selective neutron tomography is presented. In spite of a reduction of the neutron intensity due to the velocity selector technique a realistic experimental time in order of some hours for the tomography experiment was achieved.     

The Histological Basis of Frank’s Sign

Frank’s sign is a diagonal crease of the ear lobe, supposedly related to cardiac pathology, and has strongly been associated with coronary artery atherosclerosis. A total of 45 consecutive adult patients referred for autopsy in a one-and-a-half-year period were extensively studied. Samples from both the ear lobes were obtained for histopathology, as well as cardiac samples from all four cardiac compartments. When compared patients with Frank’s sign and those without it had no statistical difference in age (p = 0.0575). There was however a statistically significant increased cardiac weight (p = 0.0005), left ventricular wall thickness (p = 0.0002), and right ventricular wall thickness (p = 0.0043). Histopathology obtained from the ear lobes revealed myoelastofibrosis in an arterial vessel, located at the base of the crease, diffuse fibrosis, and Wallerian-like degeneration, with eosinophilic inclusions in the peripheral nerves. These changes suggest a time-related progression of the crease-associated changes. Our data suggest a significant correlation between the morphological changes of the myocardium and the presence of the ear lobe creases, with arterial myoelastofibrosis, Wallerian-like degeneration in peripheral nerves and deep tissue fibrosis found in the base of the crease.     

Immunotoxic effects of short-term atrazine exposure in young male C57BL/6 mice.

The herbicide atrazine (ATR) is a very widely used pesticide; yet the immunotoxicological potential of ATR has not been studied extensively. Our objective was to examine the effect of ATR on selected immune parameters in juvenile mice. ATR (up to 250 mg/kg) was administered by oral gavage for 14 days to one-month-old male C57BL/6 mice. One day, one week, and seven weeks after the last ATR dose, mice were sacrificed, and blood, spleens, and thymuses were collected and processed for cell counting and flow cytometry. Thymus and spleen weights were decreased by ATR, with the thymus being more sensitive than the spleen; this effect was still present at seven days, but not at seven weeks after the last ATR dose. Similarly, organ cellularity was persistently decreased in the thymus and in the spleen, with the splenic, but not thymic cellularity still being depressed at seven weeks post ATR. Peripheral blood leukocyte counts were not affected by ATR. There were also alterations in the cell phenotypes in that ATR exposure decreased all phenotypes in the thymus, with the number of CD4(+)/CD8(+) being affected the least. At the higher doses, the decreases in the thymic T-cell populations were still present one week after the last ATR dose. In the spleen, the CD8(+) were increased and MHC-II(+) and CD19(+) cells were decreased one day after the last ATR dose. Also, ATR treatment decreased the number of splenic na?ve T helper and T cytotoxic cells, whereas it increased the percentage of highly activated cytotoxic/memory T cells. Interestingly, the proportion of mature splenic dendritic cells (DC; CD11c(high)), was also decreased and it persisted for at least one week, suggesting that ATR inhibited DC maturation. In the circulation, ATR exposure decreased CD4(+) lymphocytes at one day, whereas at seven days after the last ATR dose, in addition to the decrease in CD4(+) lymphocytes, the MHC-II(+) cells were also decreased at the 250 mg/kg dose. Thus, ATR exposure appears to be detrimental to the immune system of juvenile mice by decreasing cellularity and affecting lymphocyte distribution, with certain effects persisting long after exposure has been terminated.     

Demolition Waste Potential for Completely Cement-Free Binders

Due to renovation and fighting in the world, a huge accumulation of construction and demolition waste is formed. These materials are effectively used as aggregates, but there is very little information about the use of scrap concrete to create cementless binders. The purpose of the work is to be a comprehensive study of the composition and properties of concrete wastes of various fractions with the aim of their rational use as cementless binders. The scientific novelty lies in the fact that the nature of the processes of structure formation of a cementless binder based on sandy fractions of the screening of fragments of destroyed buildings and structures, as a complex polyfunctional system, has been theoretically substantiated and experimentally confirmed. Different percentages of non-hydrated clinker minerals in concrete scrap were determined. In the smallest fraction (less than 0.16 mm), more than 20% of alite and belite are present. Waste of the old cement paste is more susceptible to crushing compared to the large aggregate embedded in it, therefore, particles of the old cement paste and fine aggregate predominate in the finer fractions of the waste. Comprehensive microstructural studies have been carried out on the possibility of using concrete scrap as a completely cementless binder using scanning electron microscopy, X-ray diffraction analysis, and differential thermal analysis. It has been established that for cementless samples prepared from the smallest fractions (less than 0.315 mm), the compressive strength is 1.5–2 times higher than for samples from larger fractions. This is due to the increased content of clinker minerals in their composition. The compressive strength of the cementless binder after 28 days (7.8 MPa), as well as the early compressive strength at the age of 1 day after steaming (5.9 MPa), make it possible to effectively use these materials for enclosing building structures.     

Finite Element Analysis of Self-Healing Concrete Beams Using Bacteria

Deterioration or crack formation in concrete elements is a phenomenon that cannot be easily avoided, and it has a high cost of repair. A modern technology that needs wider study is the use of the bio-precipitation of calcium carbonate using bacteria to increase a structures’ capacity. The current research presents an analytical study on self-healing concrete beams using bacteria to enhance the beam’s capacity. A Finite Element Analysis on (ANSYS 15.0) was carried out to study the effect of the bacteria concentration (the weight of bacteria to cement weight 1%, 2%, and 3%), the type of bacteria (Bacillus subtilis, E. coli, and Pseudomonas sps.), and the loading (a one-point load, a two-point load, and a distributed load on four points) on concrete beams. Two beams were chosen from previous experimental research and simulated on the ANSYS before carrying out our parametric study to verify the validity of our simulation. Following this, our parametric study was carried out on eight beams; each beam was loaded gradually up to failure. The results show that the optimum type of bacteria was the Bacillus subtilis, and that the bacteria concentration of 3% for Bacillus subtilis can increase the beam’s capacity by 20.2%. Also, we found that distributing the load to four points led to the increase of the beam’s capacity by 74.5% more than the beam with a one-point load.     

Repair of Congenital Right Atrial Aneurysm Associated With Wolff-Parkinson-White Syndrome in a 5-Year-Old Girl

This report describes our experience with a 5-year-old girl who had an extremely rare presentation of a right atrial aneurysm and associated Wolff-Parkinson-White syndrome. Before being referred to our department, she underwent an ineffective radiofrequency ablation for repeated episodes of paroxysmal supraventricular tachycardia that were causing dizziness, palpitations, and chest discomfort. We resected the aneurysm with good results; she was doing well and was in normal sinus rhythm at the time of her 1-year follow-up visit.     

Production of justicidin B, a cytotoxic arylnaphthalene lignan from genetically transformed root cultures of Linum leonii

Callus and hairy root cultures of Linum leonii were established. The genetic transformation in hairy roots was proven by PCR analysis, which showed integration of rol A and rol C genes into the plant genome. Calli and hairy roots accumulate the arylnaphthalene lignan justicidin B as a major constituent. Hairy roots produce 5-fold higher yields of justicidin B (10.8 mg g(-1) DW) compared to calli. Justicidin B shows strong cytotoxicity on the chronic myeloid leukemia LAMA-8 and K-562 cell lines and on the chronic lymphoid leukemia SKW-3 cell line with IC(50) values of 1.11, 6.08, and 1.62 microM, respectively. Apoptotic properties of justicidin B are reported for the first time.     

Germanium Nanoparticles Prepared by Laser Ablation in Low Pressure Helium and Nitrogen Atmosphere for Biophotonic Applications

Due to particular physico-chemical characteristics and prominent optical properties, nanostructured germanium (Ge) appears as a promising material for biomedical applications, but its use in biological systems has been limited so far due to the difficulty of preparation of Ge nanostructures in a pure, uncontaminated state. Here, we explored the fabrication of Ge nanoparticles (NPs) using methods of pulsed laser ablation in ambient gas (He or He-N₂ mixtures) maintained at low residual pressures (1–5 Torr). We show that the ablated material can be deposited on a substrate (silicon wafer in our case) to form a nanostructured thin film, which can then be ground in ethanol by ultrasound to form a stable suspension of Ge NPs. It was found that these formed NPs have a wide size dispersion, with sizes between a few nm and hundreds of nm, while a subsequent centrifugation step renders possible the selection of one or another NP size fraction. Structural characterization of NPs showed that they are composed of aggregations of Ge crystals, covered by an oxide shell. Solutions of the prepared NPs exhibited largely dominating photoluminescence (PL) around 450 nm, attributed to defects in the germanium oxide shell, while a separated fraction of relatively small (5–10 nm) NPs exhibited a red-shifted PL band around 725 nm under 633 nm excitation, which could be attributed to quantum confinement effects. It was also found that the formed NPs exhibit high absorption in the visible and near-IR spectral ranges and can be strongly heated under photoexcitation in the region of relative tissue transparency, which opens access to phototherapy functionality. Combining imaging and therapy functionalities in the biological transparency window, laser-synthesized Ge NPs present a novel promising object for cancer theranostics.     

Impact Strength of Preplaced Aggregate Concrete Comprising Glass Fibre Mesh and Steel Fibres: Experiments and Modeling

Concrete is the most widely used and most affordable construction material. The structural damage that concrete cracks and fractures may cause can be severe. These concerns have lately been alleviated by new developments in fibre concretes. Recent advancements in fibrous concrete and its evolution have been rapidly drawing researchers’ attentions worldwide, which motivates the development of a new type of composite with superior impact resistance. Preplaced aggregate fibrous concrete (PAFC) is a revolutionary composite comprising a higher dosage of fibres. It has outstanding impact resistance that surpasses those of traditional fibrous concrete. The impact behaviour of PAFC in addition to glass fibre mesh (GFM) has not been investigated thoroughly. To fill this research gap, this study investigates the impact performance of three-layered PAFC comprising steel fibres and GFM insertion. Eight different mixtures were prepared and can be divided into two groups. In the first group, specimens were made with 4% fibres and two single, double and triple layers of GFM insertion between the three-layered concrete. The second group of specimens was reinforced with 5, 2 and 5% steel fibres at the top, middle and bottom layers, respectively. However, the GFM insertion scheme for the second group was the same as the first. Rectangular specimens of size 500 × 100 × 100 mm were cast and tested against drop weight impact. The parameters studied were cracking impact numbers, failure impact number, ductility index and failure patterns. In addition, an analytical model was used to evaluate the impact failure energies. Results indicate that the combined action of steel fibre and GFM exhibited an excellent impact resistance. Increasing the number of GFM insertions between the specimen layer led to increased impact strength. The dose of the fibres utilized in the outer layer of the PAFC was increased, resulting in the material having a higher impact resistance. The cracking impact numbers improved from 28 to 40%, and failure impact numbers ranged from 58.8 to 92.2% when the GFM insertion numbers increased from one to three.