Evaluierung der NEF-Fehl- und Übergabeeinsätze im Raum Innsbruck

Die Anaesthesiologie - Die Qualität eines Rettungssystems zeichnet sich auch durch den effizienten Einsatz seiner personellen und Fahrzeugressourcen aus. So können im berechtigten Fall...     

Modulators of platelet function in aging

Abstract

Platelets are small, anucleated effector cells that play an important role in linking the hemostatic and inflammatory processes in the body. Platelet function is known to be altered under various inflammatory conditions including aging. A gain in platelet function during aging can increase the risk of thrombotic events, such as stroke and acute myocardial infarction. Anti-platelet therapy is designed to reduce risk of serious cerebrovascular and cardiovascular events, but the adverse consequences of therapy, such as risk for bleeding increases with aging as well. Age-associated comorbidities such as obesity, diabetes, and hyperlipidemia also contribute to increased platelet activity and thus can enhance the risk of thrombosis. Therefore, identification of unique mechanisms of platelet dysfunction in aging and in age-associated comorbidities is warranted to design novel antiplatelet drugs. This review outlines some of the current areas of research on aging-related mechanisms of platelet hyperactivity and addresses the clinical urgency for designing anti-platelet therapies toward novel molecular targets in the aging population.     

Heat Sink Effect on Tumor Ablation Characteristics as Observed in Monopolar Radiofrequency,Bipolar Radiofrequency,and Microwave,Using Ex Vivo Calf Liver Model

Thermal ablation of liver tumors near large blood vessels is affected by the cooling effect of blood flow, leading to incomplete ablation. Hence, we conducted a comparative investigation of heat sink effect in monopolar (MP) and bipolar (BP) radiofrequency ablation (RFA), and microwave (MW) ablation devices.With a perfused calf liver, the ablative performances (volume, mass, density, dimensions), with and without heat sink, were measured. Heat sink was present when the ablative tip of the probes were 8.0 mm close to a major hepatic vein and absent when >30 mm away. Temperatures (T1 and T2) on either side of the hepatic vein near the tip of the probes, heating probe temperature (T3), outlet perfusate temperature (T4), and ablation time were monitored.With or without heat sink, BP radiofrequency ablated a larger volume and mass, compared with MP RFA or MW ablation, with latter device producing the highest density of tissue ablated. MW ablation produced an ellipsoidal shape while radiofrequency devices produced spheres.Percentage heat sink effect in Bipolar radiofrequency : Mono-polar radiofrequency : Microwave was (Volume) 33:41:22; (mass) 23:56:34; (density) 9.0:26:18; and (relative elipscity) 5.8:12.9:1.3, indicating that BP and MW devices were less affected.Percentage heat sink effect on time (minutes) to reach maximum temperature (W) = 13.28:9.2:29.8; time at maximum temperature (X) is 87:66:16.66; temperature difference (Y) between the thermal probes (T3) and the temperature (T1 + T2)/2 on either side of the hepatic vessel was 100:87:20; and temperature difference between the (T1 + T2)/2 and temperature of outlet circulating solution (T4), Z was 20.33:30.23:37.5.MW and BP radiofrequencies were less affected by heat sink while MP RFA was the most affected. With a single ablation, BP radiofrequency ablated a larger volume and mass regardless of heat sink.     

Operative Behandlung von Rektumkarzinomen im Vergleich

BACKGROUND: The laparoscopic resection of rectal cancer shows morbidity and oncological safety comparable to the open approach, but morbidity increases after conversion to open resection. No oncological long-term results are available for the latter patients. METHODS: From 01/01/2000-31/12/2002, patients with curatively resected rectal cancer enrolled in a observational study were evaluated for morbidity, mortality, tumor- and local recurrence rate, paying attention to patients with conversion from laparoscopic to open resection. RESULTS: 237 (3.3%) of 7,189 patients underwent laparoscopic resection (ITT). These patients showed significantly more T1/2 tumors (P<0.001) in earlier UICC stages (P<0.001) than open resected patients. 35 (14.8%) of 237 laparoscopic procedures were converted. Compared with patients receiving complete laparoscopic or open resection, these patients showed significantly higher frequencies of intraoperative (P<0.001) and general postoperative complications (P=0.003) as well as the highest overall morbidity (P=0.031). After a median follow-up of 30.1 months, the highest 5-year local recurrence rate was found in the converted group (16.0%). The laparoscopically resected patients showed a local recurrence rate of 3.3%, patients with open resection of 12.4% (P=0.082). The disease-free survival rate did not differ between the groups (P=0.585). CONCLUSION: Laparoscopic resection of rectal cancer provides oncological results similar to open resection. After conversion, the short and oncological long-term outcomes were worse. Considering a conversion rate of 15%, only a strict indication for the laparoscopic approach can be allowed, and laparoscopic resection should be performed at centers.     

Comparative toxicity of ethylene dichloride in F344/N, Sprague-Dawley and Osborne-Mendel rats

Studies were conducted to compare the toxicity of ethylene dichloride (EDC) in F344/N rats, Sprague-Dawley rats, and Osborne-Mendel rats. Ten rats/sex/group were exposed to EDC in drinking-water at 0, 500, 1000, 2000, 4000 and 8000 ppm for 13 wk. The highest concentration was limited by the maximum solubility of EDC in water (about 9000 ppm). In addition, F344/N rats (10/sex/group) were administered EDC in corn oil by gavage to compare toxicity resulting from bolus administration with that of continuous exposure in drinking-water. Gavage doses of EDC were within the range of total daily doses (in mg/kg body weight/day) resulting from exposure in drinking-water. EDC administered by gavage resulted in greater toxicity to F344/N rats than did administration of similar doses in drinking-water. All males receiving 240 and 480 mg/kg body weight and 9/10 females receiving 300 mg/kg body weight by gavage died before the end of the study. Necrosis of the cerebellum was observed in the brains of 3 males receiving 240 mg/kg body weight and 3 females receiving 300 mg/kg body weight. Hyperplasia and inflammation of the forestomach mucosa were observed in 8 male and 3 female rats that died or were killed in moribund condition. EDC caused minimal toxicity to F344/N, Sprague-Dawley and Osborne-Mendel rats at the drinking-water concentrations used in these studies; only female F344/N rats had EDC-related renal lesions. Based on mortality and EDC-related lesions, the no-effect levels for EDC administered by gavage to F344/N rats were 120 mg/kg body weight for males and 150 mg/kg body weight for females.     

Finite element analysis of a bone-implant system with the proximal femur nail.

Static analysis with finite element of a realistic femur nail bone-implant system in a typical proximal femoral fracture under physiological load bearing situations provides results for stress, displacement and strain. The question to be answered is, if simulation with the finite element analysis is able to explain biomechanically clinical observed patterns of failure. Surface-Reconstruction with CT database of a proximal femur and reconstruction with CT based density data was done. Next steps were to unite the bone structure with the Proximal Femoral Nail and to model two relevant fractures (31-A2.2 and A2.3 according AO). After modelling of geometry, isotropic material behaviour and load application numeric calculation of the femur-nail system with FE-software was performed. FE simulation mainly shows an axial dislocation of the femoral head screw with nearly no dislocation of the antirotation screw. This so-called z-effect therefore means: (1) Tilting of the proximal main fragment around the sagittal axis between the screws and (2) relative movement of both screws in the frontal plane. Relative movement of the two screws against each other could be the reason for implant failure, the so called cut out. Furthermore simulation shows different gliding of the screws explaining the so called z-telescoping. The analyzed stress patterns have to be relativized, because isotropic material behaviour of cancellous bone was assumed. Further examinations for this issue are necessary.     

Medizinische Beurteilungskriterien zu bandscheibenbedingten Berufskrankheiten der Lendenwirbelsäule (I)

Occupational diseases Nos. 2108 and 2110 correspond to intervertebral disc-related diseases of the lumbar spine from many years of carrying or lifting heavy loads, occupations in extreme postures of full flexion or oscillation of the whole body when seated, and which compel the cessation of all activities which are or could be the cause for the origin, exacerbation or recurrence of the disease. These occupational diseases came into force at the start of 1993, but there have been considerable problems in their implementation. The present Part I of the contribution is the result of the work of an interdisciplinary study group and contains medical criteria for the assessment of possibly strain-related clinical characteristics and the evaluation of other possible causes. Part II is to be published in Volume 4/2005 and will deal with questions related to forced cessation and to the assessment of the loss of earning ability. Agreement was reached in many areas related to the assessment of occupational claims. This should allow for evidence-based decision making in the future for the occupational diseases Nos. 2108 and 2110.