基于CiteSpace可视化分析代谢组学在中医药领域的研究现状及趋势＊

目的 应用可视化方法分析代谢组学在中医药领域的现状及趋势。方法 检索中国知网数据库（CNKI）和Web of Science 核心合集数据库2021年3月15日之前收录的中医药领域代谢组学研究的相关文献，应用CiteSpace软件对纳入的文献进行关键词、作者、研究机构等内容进行可视化分析。结果 共纳入中文文献247篇，英文文献350篇。文献数量在波动中迅速上升。中、英文文献作者合作网络显示，张爱华是中医药领域代谢组学研究发文量最多的作者，并形成了核心研究团队。发文机构显示，中国医学科学院是该领域的重要研究机构，机构间合作紧密。中、英文文献关键词分析显示，研究内容主要集中在核磁共振、代谢标记物、冠心病、质谱技术、代谢通路等相关领域。结论 中医药领域代谢组学研究的热点主要为中医药治疗代谢性疾病的机制研究。研究趋势为卵泡代谢组学研究及中药有效成分的研究。     

北京市三级甲等医院结直肠癌患者就医流向规律分析

目的 分析不同特征的结直肠癌患者就医行为选择在中医院（含中西医结合医院）、西医院及肿瘤专科医院间的差异，为合理引导结直肠癌患者适宜就医及制订相关政策提供依据。方法 收集北京地区2018年1月-2019年12月17家三级甲等医院21894例首诊结直肠癌成年住院患者的病案首页数据，采用EmpowerStats 2.0对数据进行描述性分析。结果 21894例结直肠癌患者中就诊于中医院的有862例（3.93%），西医院的有8723例（39.85%），肿瘤专科医院的有12309例（56.22%）。对于不同医疗机构，男性占比均大于女性，58-68岁患者占比最大。且结直肠癌患者年龄、医疗付款方式及肿瘤分期在不同医疗机构间的分布存在差异（P<0.001）。西医院及肿瘤专科医院结直肠癌Ⅲ期患者占比最大，而就诊于中医院患者中结直肠癌Ⅳ期最多。从地域分布来看，异地就诊比例（57.32%）大于本地，且就诊于肿瘤专科医院的患者中73.66%来自外地。患者来源前三名分别是北京市、河北省及内蒙古自治区。而在北京市内，西医院患者主要来源于朝阳区、海淀区及西城区，中医院患者主要来源于海淀区、朝阳区及丰台区，肿瘤专科医院则主要来源于朝阳区、海淀区及丰台区。结论 应大力倡导年轻以及早期结直肠癌患者向中医院分流，充分施展中医药在结直肠癌患者中的治疗优势；发挥三级医院带动作用，建立对口帮扶医院，减少不必要的跨省流动及提倡结直肠癌的早筛早治，以降低结直肠癌死亡率。     

Hepatotoxicity of cantharidin is associated with the altered bile acid metabolism

Cantharidin (CTD) is an effective antitumor agent. However, it exhibits significant hepatotoxicity, the mechanism of which remains unclear. In this study, biochemical and histopathological analyses complemented with ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS)-based targeted metabolomic analysis of bile acids (BAs) were employed to investigate CTD-induced hepatotoxicity in rats. Sixteen male and female Sprague–Dawley rats were randomly divided into two groups: control and CTD (1.0 mg/kg) groups. Serum and liver samples were collected after 28 days of intervention. Biochemical, histopathological, and BA metabolomic analyses were performed for all samples. Further, the key biomarkers of CTD-induced hepatotoxicity were identified via multivariate and metabolic pathway analyses. In addition, metabolite–gene–enzyme network and Kyoto Encyclopedia of Genes and Genomes pathway analyses were used to identify the signaling pathways related to CTD-induced hepatotoxicity. The results revealed significantly increased levels of biochemical indices (alanine aminotransferase, aspartate aminotransferase, and total bile acid). Histopathological analysis revealed that the hepatocytes were damaged. Further, 20 endogenous BAs were quantitated via UHPLC-MS/MS, and multivariate and metabolic pathway analyses of BAs revealed that hyocholic acid, cholic acid, and chenodeoxycholic acid were the key biomarkers of CTD-induced hepatotoxicity. Meanwhile, primary and secondary BA biosynthesis and taurine and hypotaurine metabolism were found to be associated with the mechanism by which CTD induced hepatotoxicity in rats. This study provides useful insights for research on the mechanism of CTD-induced hepatotoxicity.     

良性前列腺增生与前列腺慢性炎症的相关性研究进展

良性前列腺增生（BPH）是老年男性常见的泌尿系统疾病，其发病与前列腺慢性炎症之间存在显著相关。感染因子、尿液返流、代谢综合征、衰老过程和自身免疫应答在内的几种刺激，通过相应分子途径引起前列腺免疫细胞的组织定位和组成成分发生广泛改变，从而导致免疫系统失调，之后引发的组织损伤和缓慢愈合，导致了BPH发生和进展。本文通过总结良性前列腺增生与前列腺慢性炎症的相关性的临床研究结果，前列腺免疫细胞在病理生理机制层面与前两者之间的内在联系，以及抗炎药物对BPH-LUTS的干预作用，以其为BPH-LUTS的药物研发提供参考。     

角膜电刺激对糖尿病大鼠前部缺血性视神经病变模型的影响

观察并评估角膜电刺激对糖尿病大鼠前部缺血性视神经病变（AION）模型的影响。方法：实验 研究。健康雄性Sparague-Dawley大鼠40只，随机分组后抽出8只作为正常大鼠组。余下32只先予 以链脲佐菌素腹腔注射建立糖尿病大鼠模型，将造模成功的大鼠随机抽出8只作为糖尿病组，余下 24只糖尿病大鼠采用孟加拉玫瑰红联合532 nm激光方法建立AION大鼠模型。将24只造模成功的 AION大鼠随机分成3组，每组8只，分别为AION模型组，不予任何处理；电刺激组，予以角膜电刺 激（刺激参数为：电流1 mA，频率20 Hz，波宽1 ms/phase，刺激时间1 h，隔日1次，刺激2周）；假电 刺激组，电极安放位置与电刺激组相同，仅不接通电源。2周后5组大鼠进行眼底照相、光学相干断 层扫描和视觉诱发电位，然后处死，行视网膜及视神经冰冻切片，苏木精伊红染色观察。数据采用 单因素方差分析和LSD-t检验进行分析。结果：正常大鼠组视盘上半部视网膜厚度为（211±13）μm， 糖尿病大鼠组为（206±16）μm，AION模型组为（240±54）μm，假电刺激组为（216±11）μm，电刺 激组为（198±4）μm，5组视盘上半部视网膜厚度差异有统计学意义（F=2.854，P=0.038）。其中AION 模型组视盘上半部视网膜厚度高于正常组、糖尿病组、电刺激组，差异均有统计学意义（P<0.05）； 正常组与糖尿病组差异无统计学意义，AION模型组与假电刺激组未见明显差异。视觉诱发电位示 AION模型组N1潜伏期较电刺激组延长，差异有统计学意义（t=4.1，P<0.001）；AION模型组P1潜伏 期较正常组、糖尿病组、假电刺激组、电刺激组延长，差异均有统计学意义（t=4.1、2.5、2.6、3.2， P<0.05）；电刺激组N1-P1波幅大于假电刺激组，差异有统计学意义（t=4.0，P<0.001）。结论：角膜电 刺激能促进糖尿病大鼠前部缺血性视神经病变模型肿胀的视盘变薄，加速视盘水肿的消退，同时在 一定程度上改善视功能。     

应用国产封堵器在治疗先天性心脏病的临床疗效分析

目的 总结国产封堵器经皮和经胸途径治疗先天性心脏病的临床疗效。方法 回顾性分析我院2013年1月至2017年12月在X线透视下或单纯超声心动图引导下采用经皮穿刺股静脉或股动静脉法，或者食管超声心动图监测下经胸小切口行先天性心脏病封堵1186例，其中经皮X线下封堵1081例、经皮单纯超声引导下封堵42例、经胸封堵63例；其中动脉导管未闭（ patent ductus arteriole，PDA）426例、房间隔缺损（atrial septal defect，ASD）363例、室间隔缺损（ventricular septal defect，VSD）348例、卵圆孔未闭11例、房间隔缺损合并室间隔缺损9例、房间隔缺损合并动脉导管未闭6例、房间隔缺损合并肺动脉瓣狭窄（pulmonary stenosis，PS）12例、动脉导管未闭合并肺动脉瓣狭窄8例、主肺动脉侧支封堵3例[经胸封堵66例改为63例，PDA443例改为426例]。结果 全组病例成功率98.2％（1165/1186），无死亡病例。随访1~36个月，术后第1、3、6、12个月及术后每年常规行超声心动图及心电图检查。术后第1、6、12个月的随访率分别为 92.9%（1102/1186）、84.1%（998/1186）、70.5%（836/1186）。超声心动图提示少量残余分流（<3 mm）18例；三尖瓣少量反流33例，中量反流5例；主动脉瓣轻度反流5例，中度反流1例；心律失常Ⅲ°房室传导阻滞（Avionics Bulletin，AVB[房室传导阻滞（Avionics Bulletin，AVB）]）1 例，Ⅱ°AVB 3例，完全性左束支3例，交界性心动过速3例，交界性逸搏2例。结论 国产封堵器在先天性心脏病封堵治疗中具有成功率高、创伤小、并发症低、操作容易、疗效确切、恢复快等特点，是治疗先天性心脏病的理想方法。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.