Diminished neo-antigen response to keyhole limpet hemocyanin (KLH) vaccines in patients after treatment with chemotherapy or hematopoietic cell transplantation

Relapse is the most common cause of treatment failure for advanced cancer, even those treated with autologous hematopoietic cell transplantation (HCT). Effective tumor-specific immunotherapy may decrease relapse, however, this will fail if the immune system is unable to respond. We developed a strategy to test immune responses with a single injection of the bona fide neo-antigen KLH. The model was first tested in 37 normal volunteers using three KLH vaccines: Intracel KLH, Biosyn KLH, and Biosyn KLH + adjuvant. Despite finding the immunogenic epitope conserved in both products, intact Intracel KLH induced a better response compared to a purified 350/390 kDA subunit of KLH contained in the Biosyn KLH product. Addition of a synthetic oil adjuvant (Montanide ISA51) restored the response to a single injection of Biosyn KLH. A quantitative readout measured by a KLH-specific cellular and humoral response with isotype switching 1 month after KLH vaccination was established. To test the integrity of the adaptive immune response in cancer patients, we vaccinated 14 patients post-HCT and 19 patients with advanced cancer with KLH vaccines that elicited a 100% response rate in normal volunteers. In marked contrast to normal subjects, both responses were significantly impaired up to 16 months after autologous HCT with an intermediate response in advanced cancer patients. KLH vaccines are safe and require only a single injection to test neo-antigen responses providing an optimal platform for definitive testing of strategies to improve diminished immune recovery after chemotherapy or post-HCT.     

Metastatic potential of human CX-1 colon adenocarcinoma cells is dependent on the expression of sialosyl Le a antigen

Several lines of evidence indicate that sialosyl Le a , tumor-associated carbohydrate antigen present on human colon carcinoma cells, is involved in formation of metastases. To study the role of this carbohydrate structure in development of metastases, we have used the clone of human colon carcinoma CX-1 cells transfected with antisense expression vector containing fragment of cDNA for a1,3/4-fucosyltransferase (FT III), which is involved in synthesis of sialosyl Le a tetrasaccharide. It has been reported previously that, in contrast to the parental cells, the antisense-transfected CX-1.1AS5 cells do not express sialosyl Le a and do not adhere to E-selectin-expressing CHO cells. In the present work we have studied the formation of liver metastases by CX-1.1AS5 cells after their orthotopic or intrasplenic implantation into athymic nu/nu mice. After orthotopic implantation of sialosyl Le a -negative colon carcinoma CX-1.1AS5 cells, the number of mice with liver metas-tases was markedly lower (21% of mice) in comparison with their number after implantation of the parental CX-1.1 cells (86% of mice). However, no differences in ability to form colonies in liver were observed between parental CX-1.1 cells and antisense-transfected CX-1.1AS5 cells after intrasplenic inoculation. The liver metastases were formed in 89% and 84% of mice, respectively. Our data support the thesis on the importance of sialosyl Le a antigen expression in the development of liver metastases by colon cancer cells, and indicate the role of transplantation route and primary tumor localization in formation of metastases.© Kluwer Academic Publishers 1998     

The forehead cutaneo-musculo-aponeurotic unit and aging of the forehead. Anatomo-physiological considerations and surgical implications

The occipitofrontalis muscle, as it is described in classical anatomy text books, does not exist. The epicranial aponeurosis or galea aponeurotica receives the occipitalis muscle on its deep surface and the frontalis muscle on its superficial surface. The frontalis muscle plays a fundamental role not only in forehead expression, but also in the support and elevation of the eyelids. This revised and corrected anatomy gives rise to the concept of the forehead cutaneomusculoaponeurotic unit, composed of skin, galea and frontalis muscle (forehead CMAU), resulting in a new forehead facelift which corrects forehead ageing, essentially related to recession of the forehead and relaxation of the galea.     

An intramural hematoma of the duodenum

Intramural hematoma of the duodenum is a rare event which is usually associated with trauma. Because of the rarity of this problem, there has been little conformity of opinions as to diagnosis and treatment of this disease. The authors report on a case of intramural hematoma of the duodenum post-traumatically occurred in a young woman. Etiopathogenesis, diagnosis and treatment of hematoma of the duodenum are thoroughly examined in the present study. Plain abdominal radiography, oral barium study, ultrasound examination, CT and RNM are diagnostic tools in this disease. It appears that most patients with intramural hematoma of the duodenum would respond well to conservative management; surgery should be reserved for those cases that remain obstructed over seven days or have evidence of peritonitis. However surgery is mandatory in cases of uncertain diagnosis. The evacuation of hematoma is considered the most effective and safest surgical treatment.     

Selected Physical and Spectroscopic Properties of TPS Moldings Enriched with Durum Wheat Bran

The impact of the amount of durum wheat bran additive used on the selected structural, mechanical, and spectroscopic properties of thermoplastic starch moldings was examined in this study. Bran was added to corn starch from 10 to 60% by weight in the blends. Four temperature settings were used for the high-pressure injection: 120, 140, 160, and 180 °C. The highest value of elongation at break (8.53%) was observed for moldings containing 60% bran. Moreover, for these moldings, the tensile strength and flexural strength were lower (appropriately 3.43 MPa and 27.14 MPa). The highest deformation at break (1.56%) were obtained for samples with 60% bran and injection molded at 180 °C. We saw that higher bran content (50 and 60%) and a higher injection molding temperature (160 °C and 180 °C) significantly changed the color of the samples. The most significant changes in the FTIR spectra were observed at 3292 and 1644 cm⁻¹ and in the region of 1460–1240 cm⁻¹. Moreover, notable changes were observed in the intensity ratio of bands at 1015 and 955 cm⁻¹. The changes observed correspond well with the amount of additive used and with the injection temperature applied; thus it may be considered as a marker of interactions affecting plasticization of the material obtained.     

The Lesniowski-Crohn disease and pregnancy--case report

Le?niowski-Crohn disease is an inflammatory process, involving all layers of the intestine, mesentery and regional lymph nodes. During the development of the disease, a thickening of the intestine wall, stricture of its lumen and adhesions have been observed. The aim of the study was to present the case of a 27-year-old pregnant woman with Crohn's disease, a very rare complication of gestation.     

Maternal serum concentration of angiogenic factors: PIGF, VEGF and VEGFR-1 and placental volume in pregnancies complicated by intrauterine growth restriction

INTRODUCTION: Pathomechanism of intrauterine growth restriction is a complex issue, involving many different factors, and is still undergoing an investigation. Improper placental angiogenesis, resulting in placental pathology, is considered to be one of the most important causes of IUGR. Placental vascular growth factors--placental growth factor (PIGF), vascular endothelial growth factor (VEGF) and its receptor (VEGFR-1), are involved in the mechanism of placental vascular development and maternal endothelial function during the pregnancy. AIM: The aim of our study was to evaluate the maternal serum concentration of vascular growth factors (PIGF, VEGF) and their receptor (VEGFR-1), as well as the placental volume in pregnancies complicated by IUGR, and to compare the results with healthy control groups. MATERIAL AND METHODS: 20 patients with intrauterine growth restriction and 18 healthy pregnant women were recruited. Their blood serum samples were assayed for the placental growth factor (PIGF), vascular endothelial growth factor (VEGF) and their receptor (VEGFR-1). These placental factors were measured with the ELISA- method (R@D Systems Kits. In all cases the placental volume was assessed with an ultrasound (Voluson V730 GE) with VOCAL (Virtual Organ Komputer-aided AnaLysis). RESULTS: Our investigation revealed significantly lower maternal serum concentrations of PIGF in pregnancies with IUGR, comparing to the controls in the third trimester. In most cases, VEGF concentrations were undetectable in the maternal serum both, in the second as well as in the third trimester. In the 2nd trimester VEGFR-1 concentrations were statistically higher in the investigated group. In the 3rd trimester the concentrations of VEGFR-1 were higher in the investigated group, but the difference has not achieved the level of statistical importance. The mean placental volume was lower in the investigated group but with not statistical gnificance. CONCLUSIONS: Presented and documented dependencies may indicate the involvement of angiogenic factors in a pathomechanism of intrauterine growth restriction process. It seems that the measurement of placental volume may be useful in IUGR diagnosis. However, it should be a complementary examination only, due to technical limitations.     

Mediastinal and subcutaneous emphysema as a complication of labor

Mediastinal emphysema and subcutaneous emphysema are rare complications of labor. We have described a case of mediastinal and subcutaneous emphysema, observed in the II stage of labor in otherwise healthy primigravida. The diagnosis was confirmed clinically and by X-ray, and endoscopies examination in District Hospital and in Clinical Department of Surgery. The etiology of this condition was not established. The mediastinal and subcutaneous emphysema, disappeared spontaneously which was confirmed by check-up after 3 months.     

Tribocorrosion and Abrasive Wear Test of 22MnCrB5 Hot-Formed Steel

The article presents the results of research on abrasive and tribocorrosion wear of boron steel. This type of steel is used in the automotive and agricultural industries for the production of tools working in soil. The main goal of the article is the evaluation of tribocorrosion and abrasive wear for hot-formed 22MnCrB5 steel and a comparison of the obtained results with test results for steel in a cold-formed state. The spinning bowl method to determine the wear of samples working in the abrasive mass was used. Furthermore, a stand developed based on the ball-on-plate system allows to determine the wear during the interaction of friction and corrosion. After the hot-forming process, 22MnCrB5 steel was three times more resistant for the abrasive wear than steel without this treatment. The average wear intensity for 22MnCrB5 untreated steel was 0.00046 g per km, while for 22MnCrB5 hot-formed steel it was 0.00014 g per km. The tribocorrosion tests show that the wear trace of hot-formed 22MnCrB5 steel was about 7.03 µm, and for cold-formed 22MnCrB5 steel a 12.11 µm trace was noticed. The hot-forming method allows to obtain the desired shape of the machine element and improves the anti-wear and anti-corrosion properties for boron steel.