Flow cytometric analysis of induced human graafian follicles. I. Demonstration and sorting of two luteinized cell populations.

STUDY OBJECTIVE: To test the hypothesis that induced human graafian follicles consist of different steroidogenic cell types on the basis of their light scatter characteristics as determined by flow cytometry. DESIGN: Cross-sectional, observational study. SETTING: Flow cytometry laboratory. PATIENTS: Thirty-six follicular aspirates from nine consecutive patients undergoing in vitro fertilization for tubal factor infertility were evaluated. RESULTS: Two distinct luteal cell populations were recovered. Both populations were positive by Oil Red O staining, suggesting the presence of intracellular lipid. Neither population stained positively for the presence of HLe-1/CD45, an antigen present on all human leukocytes. CONCLUSIONS: Cellular heterogeneity exists within the granulosa cell compartment.     

Failure of microchromatographic measurement of fetal hemoglobin in beta zero thalassemia-hereditary persistence of fetal hemoglobin.

We report microchromatographic measurement of fetal hemoglobin (HbF) proportions in a 36-year-old African-American multigravida woman. At 34 weeks she delivered a 630-g male infant who subsequently did well. Hemoglobin electrophoresis of the hemolysate revealed nearly 100% HbF without HbA, an extremely unusual naturally occurring sample. Family studies revealed a combination of hereditary persistence of fetal hemoglobin (HPFH) and beta zero-thalassemia minor. Southern blot technique confirmed heterozygous alpha 2 thalassemia and HPFH but failed to identify the beta thalassemic lesion. The absence of HbA and the very high amounts of HbF led us to measure HbF by several methods to confirm the accuracy of microchromatography of HbF at values approaching 100%. HPLC revealed a 14% F1 suggestive of microchromatographic underestimation due to glycated HbF. We conclude that cation-exchange microchromatography and the Betke method of alkali denaturation underestimate HbF values as they approach 100% and do not recommend these procedures in this rare situation.     

Lymphotoxin produced by human B- and T-cell lines appears in two distinct forms

Production and release of lymphotoxin (LT) was studied by metabolic labeling of human B- and T-cell lines with 14C-leucine and 35S-methionine. LT was immunoprecipitated with antiserum to LT and separated by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis (PAGE) followed by fluorography. Two molecular weight forms of LT with different rates of release were found both in cell supernatants and cell extracts. Monensin, a sodium ionophore, inhibited the release of LT. LT still appeared in two molecular weight forms after deglycosylation with N-glycanase. Treatment of cells with swainsonine followed by digestion of released LT with endoglycosidase H (endo H) demonstrated that the oligosaccharides were of the complex type. Subcellular fractionation of cells on Percoll density gradients demonstrated that intracellular LT is located to intermediate density fractions. No LT was found in the high density fractions corresponding to lysosomes. Phorbol 12-myristate 13-acetate induced production of tumor necrosis factor (TNF) in the B-lymphoblastoid cell line RPMI-1788. In conclusion, we have demonstrated the presence of two distinct molecular weight forms of LT, which contain N-linked oligosaccharides of the complex type.     

In vitro degradation of polymeric networks of poly(propylene fumarate) and the crosslinking macromer poly(propylene fumarate)-diacrylate

Polymeric networks of poly(propylene fumarate) (PPF) crosslinked with poly(propylene fumarate)-diacrylate (PPF-DA) are currently being investigated as an injectable, biodegradable bone cement. This study examined the effect of crosslinking density, medium pH, and the incorporation of a beta-tricalcium phosphate (beta-TCP) filler on the in vitro degradation of PPF/PPF-DA. Cylindrical specimens were submerged in buffered saline at 37 degrees C and the change in weight, geometry, and compressive mechanical properties were monitored over a 52-week period. All formulations showed an initial increase in modulus and yield strength over the first 12 weeks, achieving maxima of 1307+/-101 and 51+/-3MPa, respectively, for the beta-TCP composite. PPF/PPF-DA networks with the lower crosslinking density demonstrated the greatest degradation with a 17% mass loss. Samples in the lower buffer pH 5.0 compared to physiological pH 7.4 did not show any differences in mass loss, but exhibited a faster decrease in the compressive strength over time. The beta-TCP composites maintained their mechanical properties at the level following their initial increase. These results show that the degradation of PPF/PPF-DA networks can be controlled by the crosslinking density, accelerated at a lower pH, and prolonged with the incorporation of the beta-TCP filler.     

Increased frequency of the rare PstI allele (P2) in a population of CAD patients in Northern Greece

Restriction fragment length polymorphisms (RFLPs) at the apolipoprotein AI-CIII-AIV gene cluster and their association with coronary artery disease (CAD) and lipid levels were studied in a Northern Greek population. Ninety-five patients with CAD and fifty-four normal controls, angio-graphically proven, were included in this study. Using genomic hybridization techniques, three polymorphic restriction sites were identified at this locus: the PstI at the 3' end of the apoAI gene, the SacI at the 3' non-coding region of the apoCIII gene and the PvuII at the intergenic region between the apoCIII-AIV genes. The rare allele (P2) arising from the absence of the PstI restriction site was observed with a significantly higher frequency (p<0.01) in patients compared to normals (0.11 vs 0.02). In contrast, the rare allele for the SacI polymorphic site had a similar distribution among patients and controls (0.12 vs 0.16). The same was observed for the PvuII RFLP (0.04 vs 0.05). Correlation of lipid and apolipoprotein AI levels with the three RFLPs revealed no significant association, although apo AI and HDL were lower in patients with the P2 allele. Thus, in this Greek population, only the PstI polymorphism, among the polymorphic restriction sites examined, appears to be associated with CAD.     

Serum procalcitonin levels in chronic hepatitis C patients under pegylated interferon-alpha plus ribavirin treatment.

OBJECTIVES: To evaluate the alterations of serum procalcitonin (PCT) levels in patients with chronic hepatitis C during pegylated interferon-alpha (PEG-IFNa) plus ribavirin (RIB) treatment and to correlate them with clinical and virological outcomes. STUDY DESIGN: Fifty-two consecutive patients (29 males, age=41.2+/-14.7 years) with chronic HCV-related liver disease (six cirrhotics) were evaluated for PCT levels at baseline and during the treatment course (at week 12, 24, 48 and 72) with PEG-IFNa plus RIB. Sustained virological response (SVR) was confirmed by undetectable serum HCV-RNA at the end of treatment and again 6 months after completion of treatment. RESULTS: Two patients exhibited culture-proved bacterial infections during the treatment course. Thirty-six patients (69.2%) exhibit SVR and 16 (30.8%) were non-responders. Serum PCT levels remained within normal limits (0.1-0.5 ng/mL) in all treated patients throughout the follow-up period except those two who exhibited bacterial infections during the treatment course. Virological responders exhibited significant decline of serum PCT levels over time compared to non-responders (p<0.001), even when adjusted for multiple baseline parameters (p=0.037). CONCLUSION: Serum PCT levels decline in chronic hepatitis C patients during PEG-IFNa plus RIB treatment, especially in the sustained virological responder group, while they elevate only when bacterial infections complicate the treatment course.     

Flow Perfusion Culture of Marrow Stromal Cells Seeded on Porous Biphasic Calcium Phosphate Ceramics

Calcium phosphate ceramics have been widely used for filling bone defects to aid in the regeneration of new bone tissue. Addition of osteogenic cells to porous ceramic scaffolds may accelerate the bone repair process. This study demonstrates the feasibility of culturing marrow stromal cells (MSCs) on porous biphasic calcium phosphate ceramic scaffolds in a flow perfusion bioreactor. The flow of medium through the scaffold porosity benefits cell differentiation by enhancing nutrient transport to the scaffold interior and by providing mechanical stimulation to cells in the form of fluid shear. Primary rat MSCs were seeded onto porous ceramic (60% hydroxyapatite, 40% β-tricalcium phosphate) scaffolds, cultured for up to 16 days in static or flow perfusion conditions, and assessed for osteoblastic differentiation. Cells were distributed throughout the entire scaffold by 16 days of flow perfusion culture whereas they were located only along the scaffold perimeter in static culture. At all culture times, flow perfused constructs demonstrated greater osteoblastic differentiation than statically cultured constructs as evidenced by alkaline phosphatase activity, osteopontin secretion into the culture medium, and histological evaluation. These results demonstrate the feasibility and benefit of culturing cell/ceramic constructs in a flow perfusion bioreactor for bone tissue engineering applications.     

Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth

A novel approach to the manufacture of biodegradable polymeric scaffolds for tissue-engineering utilizing stereolithography (SLA) is presented. SLA is a three-dimensional (3D) printing method that uses an ultraviolet laser to photo-crosslink a liquid polymer substrate. The current generation of SLA devices provide a 3D printing resolution of 0.1 mm. The experiments utilized a biodegradable resin mixture of diethyl fumarate (DEF), poly(propylene fumarate) (PPF), and a photoinitiator, bisacylphosphine oxide (BAPO). The PPF is crosslinked with the use of the SLA's UV laser (325-nm wavelength). An SLA device was retrofitted with a custom fixture build tank enclosing an elevator-driven build table. A 3D prototype model testing the manufacturing control this device provides was created in a computer-aided-design package. The resulting geometric data were used to drive the SLA process, and a DEF/PPF prototype part was successfully manufactured. These scaffolds have application in the tissue engineering of bony substrates.