Fast Eating Is Associated with Increased BMI among High-School Students

Fast self-reported eating rate (SRER) has been associated with increased adiposity in children and adults. No studies have been conducted among high-school students, and SRER has not been validated vs. objective eating rate (OBER) in such populations. The objectives were to investigate (among high-school student populations) the association between OBER and BMI z-scores (BMIz), the validity of SRER vs. OBER, and potential differences in BMIz between SRER categories. Three studies were conducted. Study 1 included 116 Swedish students (mean ± SD age: 16.5 ± 0.8, 59% females) who were eating school lunch. Food intake and meal duration were objectively recorded, and OBER was calculated. Additionally, students provided SRER. Study 2 included students (n = 50, mean ± SD age: 16.7 ± 0.6, 58% females) from Study 1 who ate another objectively recorded school lunch. Study 3 included 1832 high-school students (mean ± SD age: 15.8 ± 0.9, 51% females) from Sweden (n = 748) and Greece (n = 1084) who provided SRER. In Study 1, students with BMIz ≥ 0 had faster OBER vs. students with BMIz < 0 (mean difference: +7.7 g/min or +27%, p = 0.012), while students with fast SRER had higher OBER vs. students with slow SRER (mean difference: +13.7 g/min or +56%, p = 0.001). However, there was “minimal” agreement between SRER and OBER categories (κ = 0.31, p < 0.001). In Study 2, OBER during lunch 1 had a “large” correlation with OBER during lunch 2 (r = 0.75, p < 0.001). In Study 3, fast SRER students had higher BMIz vs. slow SRER students (mean difference: 0.37, p < 0.001). Similar observations were found among both Swedish and Greek students. For the first time in high-school students, we confirm the association between fast eating and increased adiposity. Our validation analysis suggests that SRER could be used as a proxy for OBER in studies with large sample sizes on a group level. With smaller samples, OBER should be used instead. To assess eating rate on an individual level, OBER can be used while SRER should be avoided.     

Effect of implant design and endplate preparation on the compressive strength of interbody fusion constructs

STUDY DESIGN: A human cadaveric study on the compressive strength of different lumbar interbody fusion implants and endplate preparation techniques was performed. OBJECTIVES: To assess the axial compressive strength of an implant with peripheral endplate contact as opposed to full surface contact, and to assess whether removal of the central bony endplate affects the axial compressive strength. SUMMARY OF BACKGROUND DATA: The compressive strength of interbody fusion constructs has been compared between implants and bone grafts. Neither implant design nor endplate preparation has been shown to affect strength. Removal of the central bony endplate for bone grafts was noted to improve graft incorporation but also to facilitate subsidence. METHODS: A total of 44 vertebrae were tested in four experimental groups by combining two interbody implants (full-surface vs peripheral surface support) with two endplate preparation techniques (intact bony endplate vs removal of the central bony endplate). Specimens were tested to ultimate compressive failure using a 50 N/second ramped load. Yield strength and ultimate compressive strength were compared between groups using two-factor analysis of covariance. A P value less than 0.05 was considered significant. Stepwise linear regressions assessed the predictive power of age, bone mineral content, and the implant's normalized endplate coverage on yield strength and ultimate compressive strength. RESULTS: Neither implant design nor endplate preparation technique affected yield strength or ultimate compressive strength. Age, bone mineral content, and the normalized endplate coverage were strong predictors of yield strength (P < 0. 0001; r2 = 0.459) and ultimate compressive strength (P < 0.0001; r2 = 0.510). CONCLUSIONS: An implant with only peripheral support resting on the apophyseal ring offers axial mechanical strength similar to that of an implant with full support. Neither supplementary struts nor a solid implant face has any additional mechanical advantage, but reduces graft-host contact area. Removal of the central bony endplate is recommended because it does not affect the compressive strength and promotes graft incorporation.     

Le tétanos nosocomial dans le service de référence de l’hôpital National Donka à Conakry (2001–2011)

Become almost non-existent in the developed countries, the hospital-borne tetanus always stays of current events in our country in spite of the forensic problem which it puts. The objectives of this study were to determine prevalence of this affection, to describe its clinical picture and to determine its lethality. It is about a retrospective study of a duration of 11 years realized in the service of the infectious diseases of Conakry. Among 8649 hospitalizations from 2001 till 2012 we brought together 239 cases of tetanus (2.7%) among which 60 hospital-borne tetanus (0.7%). Men represented 73% of these cases, with a sex-ratio M/F of 2.7. The age bracket of 20–40 years was the most affected with 32 cases (53.3%). A single patient had begun his vaccinal calendar which had remained incomplete. Both national hospitals of the CHU of Conakry and private hospitals were the biggest suppliers of this hospital-borne tetanus with respectively 22 and 27 cases (36.6 and 45%). Tetanus related to IM of quinine represented 26 cases (43.3%) whereas the hernial cure was found in 16 cases (26.6%). The average duration of invasion and incubation was respectively 1.5 days and 6 days for the dead (n = 45.7%) and 2 days and 10.5 days for the survivors. Three-quarters of 60 patients died. The fight against this type of tetanus passes inevitably by an improvement of the working conditions, a strict application of the rules of asepsis and the in-service training of the medical and paramedical staff.     

舍曲林与氯米帕明治疗强迫症对照观察

目的：探讨舍曲林与氯米帕明治疗强迫症的临床疗效和安全性。方法将62例强迫症患者随机分为两组,分别给予舍曲林、氯米帕明治疗,观察8周。采用耶鲁‐布朗强迫量表、副反应量表评定临床疗效及不良反应。结果治疗2周末起两组耶鲁‐布朗强迫量表评分均较治疗前显著降低（P＜0．01）,同期两组比较差异无显著性（P＞0．05）。两组总有效率比较差异无显著性（P＞0．05）,舍曲林组不良反应发生率显著低于氯米帕明组（P＜0．01）。结论舍曲林治疗强迫症疗效显著,与氯米帕明相当,但舍曲林安全性高。     

Segmental stability and compressive strength of posterior lumbar interbody fusion implants

STUDY DESIGN: Human cadaveric study on initial segmental stability and compressive strength of posterior lumbar interbody fusion implants. OBJECTIVES: To compare the initial segmental stability and compressive strength of a posterior lumbar interbody fusion construct using a new cortical bone spacer machined from allograft to that of titanium threaded and nonthreaded posterior lumbar interbody fusion cages, tested as stand-alone and with supplemental pedicle screw fixation. SUMMARY OF BACKGROUND DATA: Cages were introduced to overcome the limitations of conventional allografts. Radiodense cage materials impede radiographic assessment of the fusion, however, and may cause stress shielding of the graft. METHODS: Multisegmental specimens were tested intact, with posterior lumbar interbody fusion implants inserted into the L4/L5 interbody space and with supplemental pedicle screw fixation. Three posterior lumbar interbody fusion implant constructs (Ray Threaded Fusion Cage, Contact Fusion Cage, and PLIF Allograft Spacer) were tested nondestructively in axial rotation, flexion-extension, and lateral bending. The implant-specimen constructs then were isolated and compressed to failure. Changes in the neutral zone, range of motion, yield strength, and ultimate compressive strength were analyzed. RESULTS: None of the stand-alone implant constructs reduced the neutral zone. Supplemental pedicle screw fixation decreased the neutral zone in flexion-extension and lateral bending. Stand-alone implant constructs decreased the range of motion in flexion and lateral bending. Differences in the range of motion between stand-alone cage constructs were found in flexion and extension (marginally significant). Supplemental posterior fixation further decreased the range of motion in all loading directions with no differences between implant constructs. The Contact Fusion Cage and PLIF Allograft Spacer constructs had a higher ultimate compressive strength than the Ray Threaded Fusion Cage. CONCLUSIONS: The biomechanical data did not suggest any implant construct to behave superiorly either as a stand-alone or with supplemental posterior fixation. The PLIF Allograph Spacer is biomechanically equivalent to titanium cages but is devoid of the deficiencies associated with other cage technologies. Therefore, the PLIF Allograft Spacer is a valid alternative to conventional cages.     

Preclinical Profile of BI 224436, a Novel HIV-1 Non-Catalytic-Site Integrase Inhibitor

BI 224436 is an HIV-1 integrase inhibitor with effective antiviral activity that acts through a mechanism that is distinct from that of integrase strand transfer inhibitors (INSTIs). This 3-quinolineacetic acid derivative series was identified using an enzymatic integrase long terminal repeat (LTR) DNA 3′-processing assay. A combination of medicinal chemistry, parallel synthesis, and structure-guided drug design led to the identification of BI 224436 as a candidate for preclinical profiling. It has antiviral 50% effective concentrations (EC₅₀s) of <15 nM against different HIV-1 laboratory strains and cellular cytotoxicity of >90 μM. BI 224436 also has a low, ∼2.1-fold decrease in antiviral potency in the presence of 50% human serum and, by virtue of a steep dose-response curve slope, exhibits serum-shifted EC₉₅ values ranging between 22 and 75 nM. Passage of virus in the presence of inhibitor selected for either A128T, A128N, or L102F primary resistance substitutions, all mapping to a conserved allosteric pocket on the catalytic core of integrase. BI 224436 also retains full antiviral activity against recombinant viruses encoding INSTI resistance substitutions N155S, Q148H, and E92Q. In drug combination studies performed in cellular antiviral assays, BI 224436 displays an additive effect in combination with most approved antiretrovirals, including INSTIs. BI 224436 has drug-like in vitro absorption, distribution, metabolism, and excretion (ADME) properties, including Caco-2 cell permeability, solubility, and low cytochrome P450 inhibition. It exhibited excellent pharmacokinetic profiles in rat (clearance as a percentage of hepatic flow [CL], 0.7%; bioavailability [F], 54%), monkey (CL, 23%; F, 82%), and dog (CL, 8%; F, 81%). Based on the excellent biological and pharmacokinetic profile, BI 224436 was advanced into phase 1 clinical trials.     

Atlantoaxial fusion using anterior transarticular screw fixation of C1–C2: technical innovation and biomechanical study

This study is an attempt to describe a new technique for anterior transarticular screw fixation of the atlantoaxial joints, and to compare the stability of this construct to posterior transarticular screw fixation with and without laminar cerclage wiring. Nine human cadaveric specimens were included in this study. The C1–C2 motion segment was instrumented using either anterior transarticular screws (group 1), posterior transarticular screws alone (group 2), or posterior screws with interlaminar cerclage wires (group 3). Using an unconstrained mechanical testing machine, the specimens were tested in rotation, lateral bending, and flexion-extension using nondestructive loads of ±2 N m. The specimens were also tested in translation using nondestructive loads of ±100 N. All values for the three groups with regards to anterior-posterior displacement, rotation, and lateral bending were similar as determined using a Kruskal–Wallis rank sum test with a significance level of p<0.05. The only significant difference was registered in flexion-extension where the cerclage wire added some strength to the construct. Anterior transarticular screw fixation of the atlantoaxial spine has several advantages over posterior fixation techniques, and is as stable as posterior transarticular fixation in all clinically significant planes of motion. The addition of posterior interlaminar cerclage wiring further improves resistance to flexion-extension forces. Anterior transarticular screw fixation of the atlantoaxial joint is a useful technique for achieving C1–C2 stabilization.     

Structure-activity study on a novel series of macrocyclic inhibitors of the hepatitis C virus NS3 protease leading to the discovery of BILN 2061

From the discovery of competitive hexapeptide inhibitors, potent and selective HCV NS3 protease macrocyclic inhibitors have been identified. Structure-activity relationship studies were performed focusing on optimizing the N-terminal carbamate and the aromatic substituent on the (4R)-hydroxyproline moiety. Inhibitors meeting the potency criteria in the cell-based assay and with improved oral bioavailability in rats were identified. BILN 2061 was selected as the best compound, the first NS3 protease inhibitor reported with antiviral activity in man.     

精神分裂症患者精神药物利用情况与治疗依从性关系

目的　了解门诊精神分裂症患者精神药物利用情况与治疗依从性关系。方法　随机选择门诊精神分裂症患者 552例 ,由调查者询问并填写自制的精神药物使用调查表。结果　 552例精神分裂症患者中使用单一抗精神病药物 (APD)治疗者 1 2 2例占 2 2 1 0 % ;常用的APD中前 3位依次为氯丙嗪、氯氮平和奋乃静 ;APD治疗方案中最常用的为氯丙嗪、氯氮平及氯丙嗪与氯氮平合用 ;患者服用的药物剂量与其治疗依从性间有相关关系 (P <0 0 1 ) ;患者用药种类不同 ,其治疗依从性间的差别有显著性意义 (P <0 0 1 ) ;药物副反应程度与患者治疗依从性间有相关关系 (P <0 0 1 )。结论　简化治疗方案 ,选用副反应少的最低有效维持量的药物是提高患者治疗依从性的有效途径     

Cages: designs and concepts

Many new interbody fusion cages have been recently developed, but clinical studies analyzing fusion outcome are still scarce. Radiological methods to assess fusion are not standardized and are often unreliable. Cages have been stated to provide good segmental distraction, provide axial load support and reduce segmental mobility, but there have been reports of failed fusions because of implant failure. This paper presents a critical opinion on current cage designs, stressing their clinical and biomechanical implications. Threaded cage designs compromise endplate integrity, and when placed in pairs have inherent limitations for distraction. Non-threaded cage designs usually preserve endplate integrity, but geometry may be inadequate to provide a good surface match to the endplate. The concept of an open frame type cage is believed to have biological advantages, because large graft volumes inside the cage can be in direct contact with host bone. Cadaveric tests suggest that open frame constructs have compressive strength similar to that of full surface contact cages. Restoration of segmental height, sagittal balance and increased neuroforaminal clearance are all functions of disc space distraction. The effect of cage instrumentation on axial load distribution, however, is not well understood. Biomechanical experiments strongly suggest supplementing cage instrumentation with posterior fixation, to achieve a marked increase in initial segmental stability. In the absence of gross segmental instability, micromotion at the host graft interface may still exist. As a result, fusion will never occur, instead a pseudoarthrosis will develop. For monitoring fusion, the use of non-metallic cages has distinct advantages, because no metal artifacts will disturb radiological assessment.