China special issue on gastrointestinal tumors-Radiological features of pathological complete response in mismatch repair deficient colorectal cancer after neoadjuvant PD-1 blockade: A post hoc analysis of the PICC phase II trial

Neoadjuvant programmed cell death protein 1 (PD-1) blockade exhibits promising efficacy in patients with mismatch repair deficient (dMMR) colorectal cancer (CRC). However, discrepancies between radiological and histological findings have been reported in the PICC phase II trial (NCT 03926338). Therefore, we strived to discern radiological features associated with pathological complete response (pCR) based on computed tomography (CT) images. Data were obtained from the PICC trial that included 36 tumors from 34 locally advanced dMMR CRC patients, who received neoadjuvant PD-1 blockade for 3 months. Among the 36 tumors, 28 (77.8%) tumors achieved pCR. There were no statistically significant differences in tumor longitudinal diameter, the percentage change in tumor longitudinal diameter from baseline, primary tumor sidedness, clinical stage, extramural venous invasion status, intratumoral calcification, peritumoral fat infiltration, intestinal fistula and tumor necrosis between the pCR and non-pCR tumors. Otherwise, tumors with pCR had smaller posttreatment tumor maximum thickness (median: 10 mm vs 13 mm, P = .004) and higher percentage decrease in tumor maximum thickness from baseline (52.9% vs 21.6%, P = .005) compared to non-pCR tumors. Additionally, a higher proportion of the absence of vascular sign (P = .003, odds ratio [OR] = 25.870 [95% CI, 1.357-493.110]), nodular sign (P < .001, OR = 189.000 [95% CI, 10.464-3413.803]) and extramural enhancement sign (P = .003, OR = 21.667 [2.848-164.830]) was observed in tumors with pCR. In conclusion, these CT-defined radiological features may have the potential to serve as valuable tools for clinicians in identifying patients who have achieved pCR after neoadjuvant PD-1 blockade, particularly in individuals who are willing to adopt a watch-and-wait strategy.     

右美托咪定联合综合体温保护对腔镜手术治疗老年恶性肿瘤患者苏醒期质量及免疫功能的影响

目的 探讨右美托咪定联合综合体温保护对腔镜手术治疗老年恶性肿瘤患者苏醒期质量及免疫功能的影响。方法 选择择期行腔镜手术治疗的老年恶性肿瘤患者90例，随机均分为3组：对照组（C组）、体温保护组（T组）和体温保护联合右美托咪定组（T-D组），每组30例。C组常规体温保护，T组和T-D组综合体温保护；T-D组麻醉诱导前10 min泵注右美托咪定0.5 μg/kg。记录3组患者麻醉诱导开始时（T₀）、手术开始30 min（T₁）、60 min（T₂）、90 min（T₃）、120 min（T₄）以及手术结束时（T₅）的鼻咽温度；于T₀、术后2 h（T₆）、24 h（T₇）和48 h（T₈）时抽取静脉血标本，测定T淋巴细胞亚群（CD3⁺、CD4⁺和CD8⁺）和自然杀伤细胞（NK cell）水平；记录患者术中麻醉药物用量及苏醒期质量指标。结果 与T₀比较，C组T₂～T₅时点鼻咽温度均明显降低（P < 0.05）；与C组比较，T组和T-D组T₂～T₅时点鼻咽温度明显升高（P < 0.05）。与T₀时点比较，C组、T组和T-D组T₆、T₇和T₈时点CD3⁺和NK cell活性均明显降低（P < 0.05）；C组在T₆、T₇和T₈时点，T组和T-D组在T₆和T₇时点，CD4⁺活性均明显降低（P < 0.05）。与C组比较，T组和T-D组T₆和T₇时点CD3⁺细胞活性均明显升高（P < 0.05）；T组在T₇时点，T-D组在T₆和T₇时点，CD4⁺细胞活性均明显升高（P < 0.05）；T组在T₇时点，T-D组在T₆、T₇和T₈时点，NK cell活性均明显升高（P < 0.05）。结论 采用体温保护措施联合右美托咪定能够维持老年恶性肿瘤患者的体温稳定，减少围手术期意外低体温（IPH）的发生，并有效提高患者苏醒期质量，减轻免疫抑制程度，加速患者早期恢复。     

“三全育人”视角下思政教育机制实践与探索——“杏林成长导师”计划的构建

“三全育人”是高校思政教育工作的关键一环，也是中医药高校推动思政教育的重要内容。以“三全育人”为视角对北京中医药大学思想政治教育举措“杏林成长导师”计划路径、内容深入分析，运用统计分析和文献研究方法，剖析该计划对中医学专业大学生的学业、思想和实践等多个层面的现实成效，从而为“三全育人”理念在中医药院校制度建构中的应用提供新的视角与方法。     

Venetoclax alone or in combination with other regimens treatment achieve deep and sustained remission of relapsed/refractory chronic lymphocytic leukemia: a meta-analysis

Clinical and Experimental Medicine - Recently, the use of novel targeted drugs significantly improved the overall response rate (ORR) and survival of patients with relapsed/refractory chronic...     

安宁疗护对社区临终患者生活质量影响的Meta分析

目的通过Meta分析评价安宁疗护对社区临终患者生活质量的影响。方法计算机检索PubMed、CINAHL、ScienceDirect、MEDLINE、Cochrane Library、SAGE数据库、中国知网、维普中文科技期刊数据库、万方数据库和中国生物医学文献数据库中安宁疗护对社区临终患者的随机对照试验,由2名研究人员独立筛选文献并提取资料,对符合质量标准的随机对照试验进行Meta分析。结果共纳入7篇文献,包括1095名社区临终患者。Meta分析结果显示,安宁疗护可以改善社区临终患者的总体生活质量(SMD=0.48,95%CI0.07~0.88,P=0.02)和情绪功能(SMD=1.27,95%CI0.59~1.95,P<0.001),在改善生活质量的躯体功能、角色功能、认知功能和社会功能水平上差异无统计学意义(P>0.05)。结论安宁疗护能改善社区临终患者的总体生活质量和情绪功能,但对生活质量其他功能的改善情况还需要设计更加规范、多中心、大样本的随机对照试验进一步证实。     

中药生产过程质量控制关键技术研究进展

中医药发展已上升到国家战略层面,在医药行业贯彻实施"中国制造2025"战略的新形势下,中药生产过程质量控制是中药工业需要加快突破的关键领域之一。对中药生产过程质量控制领域在工艺设计、分析检测、过程建模、制造装备等方面的关键共性问题进行解析,综述了中药生产过程质量控制体系中工艺过程理解、生产过程实时分析方法开发、过程控制策略建立3个方面的研究进展;并结合企业研究实践,介绍了质量源于设计(quality by design,Qb D)、过程分析技术(process analytical technology,PAT)、实验设计(design of experiment,DOE)、多变量统计分析等关键技术在上述3个研究方向中的应用进展,分析了实际工业应用的难点问题并对其应用前景进行展望,旨在为中药企业应用和提升生产过程质量控制技术提供参考。     

Utility of Tissue Similarity Maps Based on Relative Cerebral Blood Volume for Grading Gliomas as Validated by Histological Results

@@     

生命早期抗生素使用与儿童哮喘:因果关系还是混杂效应?

儿童哮喘的发病率逐年上升.基于卫生假说,抗生素使用可能减少了微生物暴露,从而增加了过敏性疾病发生的风险.近十年来,就早期抗生素暴露与儿童哮喘的关系进行的大量的流行病学调查的结果并不一致.大多数回顾性研究发现正相关联系,但前瞻性研究未发现联系或联系强度较弱.逆向因果和指示混淆可部分解释两者的关系,但也难以否定因果关系的存在.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.