药物注射包部件的硅烷化

大多数药物注射包部件(例如针头、注射器、活塞和瓶等)都要求采用某些形式的表面处理或润滑,以便改善其操作性和功能性。本文综述了硅烷化使用的材料和工艺,以及在其后对硅烷化制品的消毒和硅油的清除。     

Infection with HIV type 1 group M non-B subtypes in individuals living in New York City

OBJECTIVE: To document infection with HIV type 1 (HIV-1) group M non-B subtypes in individuals living in New York City. DESIGN: From October 1999 through April 2003, HIV-1-seropositive individuals were selected from 3 clinics in New York City based on having risk factors for infection with HIV-1 non-B subtypes. METHODS: HIV-1 RNA was extracted from plasma samples, and partial gag, pol, or env genes were amplified by PCR analysis. The infecting HIV-1 group M subtype was determined based on results of either heteroduplex mobility assay or sequencing and phylogenetic analysis. RESULTS: Ninety-seven subjects were enrolled in the study. Of the 97 subjects, 91 (94%) were selected based on having emigrated from a non-European country, while 6 (6%) were native United States citizens. Subtypes were successfully determined in 53 (55%) of the 97 plasma samples tested. The subtypes in 2 plasma samples were unclassifiable. HIV-1 infections were classified as those due to the following group M subtypes: A (n = 4; 7%), B (n = 12; 22%), C (n = 8; 15%), F (n = 2; 4%), CRF01_AE-like (n = 7; 13%), CRF02_AG-like (n = 19; 34%), an intersubtype recombinant form G/A (n = 1; 2%), and unclassifiable viruses (n = 2; 4%). CONCLUSION: This study reveals infection with a broad variety of HIV-1 group M subtypes mostly in the immigrant population of New York City as well as how several non-B subtypes are being introduced into the United States.     

The antiatherogenic effect of allicin: possible mode of action.

OBJECTIVE: Garlic (Allium sativum) has been suggested to affect several cardiovascular risk factors. Its antiatherosclerotic properties are mainly attributed to allicin that is produced upon crushing of the garlic clove. Most previous studies used various garlic preparations in which allicin levels were not well defined. In the present study, we evaluated the effects of pure allicin on atherogenesis in experimental mouse models. METHODS AND RESULTS: Daily dietary supplement of allicin, 9 mg/kg body weight, reduced the atherosclerotic plaque area by 68.9 and 56.8% in apolipoprotein E-deficient and low-density lipoprotein (LDL) receptor knockout mice, respectively, as compared with control mice. LDL isolated from allicin-treated groups was more resistant to CuSO(4)-induced oxidation ex vivo than LDL isolated from control mice. Incubation of mouse plasma with (3)H-labeled allicin showed binding of allicin to lipoproteins. By using electron spin resonance, we demonstrated reduced Cu(2+) binding to LDL following allicin treatment. LDL treatment with allicin significantly inhibited both native LDL and oxidized LDL degradation by isolated mouse macrophages. CONCLUSIONS: By using a pure allicin preparation, we were able to show that allicin may affect atherosclerosis not only by acting as an antioxidant, but also by other mechanisms, such as lipoprotein modification and inhibition of LDL uptake and degradation by macrophages.     

An Investigation of the Thermal Transitions and Physical Properties of Semiconducting PDPP4T:PDBPyBT Blend Films

This work focuses on the study of thermal and physical properties of thin polymer films based on mixtures of semiconductor polymers. The materials selected for research were poly [2,5-bis(2-octyldodecyl)-pyrrolo [3,4-c]pyrrole-1,4(2H,5H)-dione-3,6-diyl)-alt-(2,2′;5′,2″;5″,2′′′-quater-thiophen-5,5′′′-diyl)]—PDPP4T, a p-type semiconducting polymer, and poly(2,5-bis(2-octyldodecyl)-3,6-di(pyridin-2-yl)-pyrrolo [3,4-c]pyrrole-1,4(2H,5H)-dione-alt-2,2′-bithiophene)—PDBPyBT, a high-mobility n-type polymer. The article describes the influence of the mutual participation of materials on the structure, physical properties and thermal transitions of PDPP4T:PDBPyBT blends. Here, for the first time, we demonstrate the phase diagram for PDPP4T:PDBPyBT blend films, constructed on the basis of variable-temperature spectroscopic ellipsometry and differential scanning calorimetry. Both techniques are complementary to each other, and the obtained results overlap to a large extent. Our research shows that these polymers can be mixed in various proportions to form single-phase mixtures with several thermal transitions, three of which with the lowest characteristic temperatures can be identified as glass transitions. In addition, the RMS roughness value of the PDPP4T:PDBPyBT blended films was lower than that of the pure materials.     

Variously Prepared Zeolite Y as a Modifier of ANFO

In the presented research, we investigated Ammonium Nitrate Fuel Oil (ANFO), with the addition of variously modified zeolite Y as an attractive explosive. Analysis of both blasting tests and thermodynamic models of blasting properties led to the conclusion that the addition of zeolite Y enhanced the detonation properties of such prepared ANFO via the growth of the detonation pressure, temperature, compression energy, and heat of the explosion. Generally, the modification of ANFO with variously prepared zeolite Y also reduced the volume of (CO_x + NO_x) post-blast fumes. Furthermore, it was found that the ANFO’s velocity of detonation (VOD) could be controlled by the choice of the way of zeolite Y modification. Namely, for zeolite Y without Mg, as well as Mg-Y prepared via the impregnation method, the VOD rose. The opposite effect was observed when ANFO was modified with Mg-Y, obtained from the deposition of Mg over zeolite Y via the ultrasonic-assisted procedure.     

Harnessing tumorous flaws for immune supremacy: is miRNA-155 the weak link in breast cancer progression?

With the advent of immune checkpoint blockade (ICB) therapy, treatment strategies for late-stage cancers have seen a radical advancement. In this issue of the JCI, Wang et al. characterize the functional role of miR-155 in breast cancer and its potential in harnessing the efficacy of immunotherapy. The study reports that high expression levels of miR-155 in breast cancer cells downregulated suppressor of cytokine signaling 1 (SOCS1), increased the phosphorylated STAT1 (pSTAT1)/pSTAT3 ratio, and thereby stimulated chemoattractants for tumor infiltration of effector T cells. Moreover, miR-155 overexpression set the stage for ICB therapy via increased programmed death ligand 1 (PD-L1) expression on cancer cells and enhanced immunological memory response via the release of miR-155–containing extracellular vesicles. Collectively, these data suggest that miR-155 is a strong candidate as a prognostic biomarker for ICB therapy.     

Prevalence of Orthorexia in Groups of Students with Varied Diets and Physical Activity (Silesia,Poland)

(1) Background: The literature emphasizes the role of many factors influencing the onset of eating disorders (EDs) and their mutual influence on each other. Therefore, this study aimed to evaluate and compare the prevalence of orthorexic behaviors in groups of health-related and non-health-related students in terms of their differential health behaviors—diet and physical activity levels. (2) The study included 300 individuals representing two equal groups of fields of study, which for the study were called the health-related field (HRF) and the non-health-related field (NRF). (3) Results: Based on the results of the dietary assessment, it was found that the best dietary model was characterized by the HRF group; in this group, 97.2% of students were characterized by a very good and good dietary mode. The NRF group, on the other hand, was dominated by a sufficient dietary mode for 64.4% of all cases in this group (94 people), while the dietary model marked as “good” was less popular, at 24.6% of this group (36 people). (4) Conclusions: Based on the cited self-research and information from the literature, it can be concluded that the problem of orthorexia is still a new issue at the level of social sciences, medical sciences, and health sciences. The psychometric tools used in this study allowed us to demonstrate the prevalence of the aforementioned eating disorders in the sample groups of students.     

Effect of the Indentation Load on the Raman Spectra of the InP Crystal

Nanoindentations and the Raman spectroscopy measurements were carried out on the (001) surface of undoped and S-doped InP crystal. The samples were indented with the maximum load ranging from 15 mN to 100 mN. The phase transition B3→B1 was not confirmed by spectroscopic experiments, indicating a plastic deformation mechanism governed by dislocations activity. Increasing the maximum indentation load shifts and the longitudinal and transverse optical Raman bands to lower frequencies reveals a reduction in the elastic energy stored in the plastic zone right below the indentation imprint. Mechanical experiments have shown that a shift in Raman bands occurs alongside the indentation size effect. Indeed, the hardness of undoped and S-doped InP crystal decreases as a function of the maximum indentation load.     

Warm Mix Asphalt Binder Utilizing Water Foaming and Fluxing Using Bio-Derived Agent

The present paper investigates the effects of simultaneous mechanical foaming using water and fluxing with a bio-derived agent on the properties of three distinct asphalt binders: 50/70 paving-grade bitumen, 45/80–55 polymer-modified bitumen, and 45/80–80 highly modified asphalt binder. The testing involved classical tests for assessing binder consistency (penetration at 25 °C, ring and ball softening point, Fraass breaking point, and dynamic viscosity) as well as performance tests (high and low Superpave critical temperatures and multiple stress creep recovery). The tests included assessment directly after asphalt binder foaming and were repeated after a 14-day period. It was shown that bitumen foaming had only short-term effects on the asphalt binders, which did not persist in the repeated tests after 14 days. The fluxing agent that was utilized caused significant changes in the consistency of all asphalt binders. The changes in the performance characteristics of the 50/70 and 45/80–55 binders were severe and amounted to a significant decrease in high-temperature performance of these binders. On the other hand, an improvement in all performance characteristics in the case of the 45/80–80 asphalt binder was observed as a result of the applied processes, particularly when measured 14 days after foaming. This study shows that the simultaneous use of foaming and the fluxing additive decreased the dynamic viscosity of the 45/80–80 binder, while improving its properties relating the pavement performance.