The technological imperative in tuberculosis care and prevention in Vietnam

ABSTRACT

A monocausal bacteriological understanding of infectious disease orients tuberculosis control efforts towards antimicrobial interventions. A bias towards technological solutions can leave multistranded public health and social interventions largely neglected. In the context of globalising biomedical approaches to infectious disease control, this ethnography-inspired review article reflects upon the implementation of rapid diagnostic technology in low- and middle-income countries. Fieldwork observations in Vietnam provided a stimulus for a critical review of the global rollout of tuberculosis diagnostic technology. To address local needs in tuberculosis control, health managers in resource-poor settings are readily cooperating with international donors to deploy novel diagnostic technologies throughout national tuberculosis programme facilities. Increasing investment in new diagnostic technologies is predicated on the supposition that these interventions will ameliorate disease outcomes. However, suboptimal treatment control persists even when accurate diagnostic technologies are available, suggesting that promotion of singular technological solutions can distract from addressing systemic change, without which disease susceptibility, propagation of infection, detection gaps, diagnostic delays, and treatment shortfalls persist.     

Effect of temperature on blood flow and metabolism in a neurovascular island skin flap

Using the buttock flap in 29 white Yorkshire pigs, blood flow and O2 consumption were measured at dermal temperatures between 35 degrees C and 15 degrees C. Flow was measured with an electromagnetic flowmeter and O2 consumption was calculated as the product of blood flow and the difference in flap A-VO2. Baseline flow was 6.6 +/- .9 (SE) ml/100 g/min at 35 degrees C and 3.1 +/- .02 (SE) ml/10 g/min at 15 degrees C. Blood flow through the flap stopped completely at a dermal temperature of 14 degrees C. Oxygen consumption was 0.16 +/- .02 (SE) ml/100 g/min at 35 degrees C and 0.04 +/- 0.01 (SE) ml/100 g/min at 15 degrees C. At 20 degrees C blood flow was 4.3 ml/100 g/min and metabolism was .04 ml/100 g/min. In other words, blood flow was 65% of baseline, while O2 consumption was only 25% of baseline. The therapeutic effect of local cooling at 20 degrees C deserves further investigation. The cessation of flow at 14 degrees C may be caused by increased plasma viscosity.     

The effect of pressurized carbon dioxide as a temporary plasticizer and foaming agent on the hot stage extrusion process and extrudate properties of solid dispersions of itraconazole with PVP-VA 64.

The aim of the current research project was to explore the possibilities of combining pressurized carbon dioxide with hot stage extrusion during manufacturing of solid dispersions of itraconazole and polyvinylpyrrolidone-co-vinyl acetate 64 (PVP-VA 64) and to evaluate the ability of the pressurized gas to act as a temporary plasticizer as well as to produce a foamed extrudate. Pressurized carbon dioxide was injected into a Leistritz Micro 18 intermeshing co-rotating twin-screw melt extruder using an ISCO 260D syringe pump. The physicochemical characteristics of the extrudates with and without injection of carbon dioxide were evaluated with reference to the morphology of the solid dispersion and dissolution behaviour and particle properties. Carbon dioxide acted as plasticizer for itraconazole/PVP-VA 64, reducing the processing temperature during the hot stage extrusion process. Amorphous dispersions were obtained and the solid dispersion was not influenced by the carbon dioxide. Release of itraconazole from the solid dispersion could be controlled as a function of processing temperature and pressure. The macroscopic morphology changed to a foam-like structure due to expansion of the carbon dioxide at the extrusion die. This resulted in increased specific surface area, porosity, hygroscopicity and improved milling efficiency.     

Mechanical Testing of Seven Fixation Methods for Generation of Compression Across a Midtarsal Osteotomy: A Comparison of Internal and External Fixation Devices

The purpose of this study was to assess 7 methods of fixation for a midtarsal osteotomy. Polyurethane foam models (N = 6) and cadaver specimens (N = 4-7) were used to examine the force generated by the different constructs of fixation. A midtarsal osteotomy was performed on each specimen in the test groups. The osteotomies were fixated either with 2 parallel 0.062-in Kirschner wires and 40-mm-long, 4-mm partially threaded, cancellous, cannulated titanium screws, an external ring fixator (frame), a frame with wires tensioned (tension), a frame with wires tensioned and compressed toward the osteotomy (tension and compression), a frame with tension, compression, and parallel Kirschner wires, or a frame with tension, compression, and two 4.0 cannulated parallel screws, respectively. Each model was fixated, and the force generated by the construct across the osteotomy was recorded via the use of pressure-sensitive film. Statistical analysis of the data in the polyurethane foam group determined that the use of frame with tension, compression, and two 4.0 parallel cannulated screws was statistically superior to 1) frame, 2) frame with tension, 3) 2 parallel Kirschner wires, 4) two 4.0 cannulated parallel screws, and 5) frame with tension and compression. A cadaver study determined that the frame with tension, compression, and 2 parallel Kirschner wires was statistically superior to 1) frame and 2) two parallel Kirschner wires. These findings suggest that there is a difference in the force generated by the type of fixation construct across a midtarsal osteotomy.     

Chronic lower extremity ischemia: a human model of ischemic tolerance.

BACKGROUND: Ischemic preconditioning (IPC) has been found in animals to have a protective effect against future ischemic injury to muscle tissue. Such injury is unavoidable during some surgical procedures. To determine whether chronic ischemia in the lower extremities would imitate IPC and reduce ischemic injury during vascular surgery, we designed a controlled clinical study. PATIENTS AND METHODS: Two groups of patients at a university-affiliated medical centre with chronic lower-extremity ischemia served as models of IPC: 6 patients awaiting femoral distal bypass (FDB) and 4 scheduled for aortobifemoral (ABF) bypass grafting for aortoiliac occlusive disease. Seven patients undergoing elective open repair of an infrarenal abdominal aortic aneurysm (AAA) were chosen as non-IPC controls. Three hematologic indicators of skeletal-muscle injury, lactate dehydrogenase (LDH), creatine kinase (CK) and myoglobin, were measured before placement of the proximal clamp, during surgical ischemia, immediately upon reperfusion, 15 minutes after and 1 hour after reperfusion, and during the first, second and third postoperative days. RESULTS: Baseline markers of skeletal-muscle injury were similar in all groups. In postreperfusion samples, concentrations of muscle-injury markers were significantly lower in the 2 PC groups than in the control group. For example, at day 2, LDH levels were increased by about 30% over baseline measures in the elective AAA (control) group, whereas levels in the FDB and ABF groups remained statistically unchanged from baseline. Myoglobin in controls had increased by 977%, but only by 160% in the FDB and 528% in the ABF groups. CK levels, in a similar trend, were 1432% higher in the control group and only 111% (FDB) and 1029% (ABF) in the study groups. Taken together, these data represent a significant level of protection. CONCLUSIONS: Patients with chronic lower-extremity ischemia suffered less severe ischemic injury after a period of acute ischemia than those with acute ischemia alone. Ischemic preconditioning is one proposed mechanism to help explain this protective effect.     

Impact of a clinical pharmacist on antibiotic prescribing. A multicenter trial.

Within the past two decades, hospital pharmacists have become increasingly involved in providing consultation to physicians for drug management. Antibiotic use has become a complex and rapidly expanding discipline, complicated by the introduction of multiple new antimicrobial agents, each with unique features, and the pressures of prospective payment schemes. This study demonstrated that a team including a pharmacist had a positive impact on medical residents' utilization of antibiotics.     

Monoclonal antibody production to human and bovine 2′:3′-cyclic nucleotide 3′-phosphodiesterase (CNPase): high-specificity recognition in whole brain acetone powders and conservation of sequence between CNP1 and CNP2

Monoclonal antibodies against human and bovine 2′:3′-cyclic nucleotide 3′-phosphodiesterase (CNPase) were generated by fusing FOX-NY myeloma cells with spleen cells from RBF/Dn mice previously immunized with the purified brain antigens. The enzyme isolated from bovine brain was quite basic, with an isoelectric point of 9.71 and both the bovine and human enzymes consisted of a closely spaced doublet at approximately 44 and 46 kDa on SDS-PAGE. Six monoclonals were identified as strongly recognizing the enzyme on both ELISA plates and on immunoblots of whole brain protein. Four monoclonals very weakly cross-reacted with guinea pig myelin basic protein. In contrast with two previous reports, some of our monoclonal antibodies did immunostain 2 or 3 protein bands in peripheral nerve, two bands closely corresponding to those immunostained in central nervous system (CNS) myelin, the Wolfgram protein fraction and in acetone powders of whole brain. Each of the 6 monoclonals reacting strongly on immunoblots recognized the enzyme in from 2 to 5 of the species examined (human, bovine, rat, mouse and rabbit). In addition, all 6 monoclonals that immunostained the enzyme in whole brain, myelin and Wolfgram protein immunoblots recognized both CNP1 (44 kDa) and CNP2 (46 kDa). The two closely spaced protein bands observed on SDS-PAGE and previously stained on immunoblots of CNS CNPase using polyvalent rabbit anti-bovine CNPase antisera, and now different monoclonal antibodies, appear to be immunologically related and to contain highly conserved sequences.     

Adding Bupivacaine to High-potassium Cardioplegia Improves Function and Reduces Cellular Damage of Rat Isolated Hearts after Prolonged, Cold Storage

Background: Bupivacaine retards myocardial acidosis during ischemia. The authors measured function of rat isolated hearts after prolonged storage to determine whether bupivacaine improves cardiac protection compared with standard cardioplegia alone.

Methods: After measuring cardiac function on a Langendorff apparatus, hearts were perfused with cardioplegia alone (controls), cardioplegia containing 500 [mu]m bupivacaine, or cardioplegia containing 2 mm lidocaine; were stored at 4[degrees]C for 12 h; and were then reperfused. Heart rate and left ventricular developed pressures were measured for 60 min. Maximum positive rate of change in ventricular pressure, oxygen consumption, and lactate dehydrogenase release were also measured.

Results: All bupivacaine-treated, four of five lidocaine-treated, and no control hearts beat throughout the 60-min recovery period. Mean values of heart rate, left ventricular developed pressure, maximum positive rate of change in ventricular pressure, rate-pressure product, and efficiency in bupivacaine-treated hearts exceeded those of the control group (P < 0.001 at 60 min for all). Mean values of the lidocaine group were intermediate. Oxygen consumption of the control group exceeded the other groups early in recovery, but not at later times. Lactate dehydrogenase release from the bupivacaine group was less than that from the control group (P < 0.001) but did not differ from baseline.     

The use of a new hydrophilic polymer, Kollicoat IR, in the formulation of solid dispersions of Itraconazole.

Kollicoat IR, a new pharmaceutical excipient developed as a coating polymer for instant release tablets, was evaluated as a carrier in solid dispersions of Itraconazole. The solid dispersions were prepared by hot stage extrusion. Modulated temperature differential scanning calorimetry and X-ray powder diffraction were used to evaluate the miscibility of the drug and the carrier. The pharmaceutical performance was evaluated by dissolution experiments, performed in simulated gastric fluid without pepsin (SGF(sp)). In the X-ray diffractograms no Itraconazole peaks were visible; the polymer on the other hand appeared to be semi-crystalline. Moreover, its crystallinity increased during the extrusion process due to exposure to heat and shear forces. Modulated temperature differential scanning calorimetry analysis showed that the drug and the polymer formed a two phase system. Separate clusters of glassy Itraconazole were present for drug loads of 40% or higher, indicating further phase separation. Dissolution measurements demonstrated a significantly increased dissolution rate for the solid dispersions compared to physical mixtures. Interestingly the physical mixture made up of glassy Itraconazole and Kollicoat IR (20/80, w/w) showed a dissolution rate and maximum that was much higher than that of the physical mixture made up of crystalline Itraconazole and that of pure glassy Itraconazole. The results of this study show that Kollicoat IR is a promising excipient for the formulation of solid dispersions of Itraconazole prepared by hot stage extrusion.