Magnetic and spectroscopic properties of Ni–Zn–Al ferrite spinel: from the nanoscale to microscale

This article presents the annealing effect on the structural, elastic, thermodynamic, optical, magnetic, and electric properties of Ni_0.6Zn_0.4Fe_1.5Al_0.5O₄ (NZFAO) nanoparticles (NPs). The samples were successfully synthesized by the sol–gel method followed by annealing of the as-synthesized at 600, 800, 900, 1050, and 1200 °C. This approach yielded the formation of a highly crystalline structure with crystallite size ranging from 17 nm to 40 nm. X-ray diffraction (XRD), scanning electron microscopy (SEM) techniques, as well as energy disperse spectroscopy (EDS), Fourier transform infrared (FTIR) and Raman spectroscopy, were used in order to determine the structural and morphological properties of the prepared samples. Rietveld XRD refinement reveals that Ni–Zn–Al ferrite nanoparticles crystallize in inverse cubic (Fd$\bar{3}$m) spinel structure. Using FTIR spectra, the elastic and thermodynamic properties were estimated. It was observed that the particle size had a pronounced effect on elastic and thermodynamic properties. Magnetic measurements were performed up to 700 K. The prepared ferrite samples present the highest Curie temperature, which decreases with increasing particle size and which is consistent with finite-size scaling. The thickness of the surface shell of about 1 nm was estimated from size-dependent magnetization measurements using the core–shell model. Besides, spin resonance, magnetostriction, temperature coefficient of resistance (TCR), and electrical resistivity properties have been scientifically studied and appear to be different according to their size. The optical properties of synthesized NZFAO nanoparticles were investigated, and the differences caused by the particle sizes are discussed on the basis of the phonon confinement effect. This effect was also inspected by the Raman analysis. Tuning of the physical properties suggests that the Ni–Zn–Al ferrite samples may be promising for multifunctional diverse applications.

This article presents the annealing effect on the structural, elastic, thermodynamic, optical, magnetic, and electric properties of Ni_0.6Zn_0.4Fe_1.5Al_0.5O₄ (NZFAO) nanoparticles (NPs).     

Structural study and large magnetocaloric entropy change at room temperature of La1−x□xMnO3 compounds

In this study, our central focus is to investigate the magnetocaloric characteristics of a La_1−x□_xMnO₃ (x = 0.1, 0.2 and 0.3) series prepared by a sol–gel technique published in Prog. Mater. Sci., 93, 2018, 112–232. The crystallographic study revealed that our compounds crystallize in a rhombohedral structure with R$\bar{3}$c. Ferromagnetic (FM) and paramagnetic (PM) characters were detected from the variation in magnetization as a function of magnetic fields at different temperatures. The second order transition was verified from the Arrott plots (M²vs. (μ₀H/M)), where the slopes have a positive value. In order to verify the second order, we traced the variation of magnetization vs. temperature at different magnetic fields for x = 0.2. This revealed a ferromagnetic (FM)–paramagnetic (PM) transition when temperature increases. Relying on the indirect method while using the Maxwell formula, we determined the variation in the entropy (−ΔS_M) as a function of temperature for different magnetic fields for the three samples. We note that all the studied systems stand as good candidates for magnetic refrigeration with relative cooling power (RCP) values of around 131.4, 83.38 and 57.26 J kg⁻¹ with magnetic fields below 2 T, respectively. Subsequently, the magnetocaloric effect was investigated by a phenomenological model for x = 0.2. The extracted data confirm that this phenomenological model is appropriate for the prediction of magnetocaloric properties. The study also demonstrated that this La_0.8□_0.2MnO₃ system exhibits a universal behaviour.

In this study, our central focus is to investigate the magnetocaloric characteristics of a La_1−x□_xMnO₃ (x = 0.1, 0.2 and 0.3) series prepared by a sol–gel technique.     

Structural,optical and dielectric properties of Cu1.5Mn1.5O4 spinel nanoparticles

In this study, a Cu_1.5Mn_1.5O₄ spinel was successfully synthesized by a sol–gel method at 500 °C for 5 h and characterized by different techniques. X-ray diffraction (XRD), Fourier transformation infrared (FTIR) spectroscopy and Raman spectroscopic analyses confirmed the formation of a spinel cubic structure with the Fd$\bar{3}$m space group. The SEM proves that the grain size of our compound is of the order of 48 nm. Crystallite sizes determined from three estimates are closer to the grain size obtained from the SEM, indicating the single domain nature of the sample. The optical properties of UV-visible spectroscopy for our sample showed that the gap value is equal to 3.82 eV, making our compound a good candidate for optoelectronic applications. For electrical properties, impedance spectroscopy was performed at a frequency range of 40 ≤ frequency ≤ 10⁶ Hz. This suggested hoping conduction due to three theoretical models. The latter can be attributed to the correlated barrier hopping (CBH) model in region I, overlapping large polaron tunneling (OLPT) in region II and non-overlapping small polaron tunneling (NSPT) mechanism in region III. One dielectric relaxation is detected from the dielectric impedance and modulus, attributed to grain contributions. This behavior was confirmed by both Nyquist and Argand''s plots of dielectric impedance at different measuring temperatures.

In this study, a Cu_1.5Mn_1.5O₄ spinel was successfully synthesized by a sol–gel method at 500 °C for 5 h and characterized by different techniques.     

Gastric Stenosis After Laparoscopic Sleeve Gastrectomy: Diagnosis and Management

Purpose

The use of laparoscopic sleeve gastrectomy (LSG) is increasing worldwide. Although post-LSG gastric stenosis (GS) is less frequent, it has not been well defined and lacks standardized management procedures. The objective of the present study was to describe a series of patients with GS symptoms after LSG and to develop a standardized management procedure for this complication.

Methods

We performed a retrospective analysis of a prospective database of patients presenting with GS after LSG procedures performed between January 2008 and March 2014. The primary efficacy criterion was the frequency of post-LSG GS. GS was classified as functional (i.e. a gastric twist) or organic. The secondary efficacy criteria included the time interval between LSG and diagnosis of GS, the type of stenosis, the type of management, and the follow-up data.

Results

During the study period, 1210 patients underwent primary or secondary LSG. Seventeen patients had post-operative symptoms of GS (1.4 %); one patient had achalasia that had not been diagnosed preoperatively and thus was excluded from our analysis. The median time interval between LSG and diagnosis of GS was 47.2 days (1–114). Eleven patients had organic GS and six had functional GS. Seven patients required nutritional support. Endoscopic treatment was successful in 15 patients (88.2 %) after balloon dilatation (n?=?13) or insertion of a covered stent (n?=?2). Two of the 15 patients required conversion to Roux-en-Y gastric bypass (11.8 %).

Conclusion

GS after LSG is a rare complication but requires standardized management. Most cases can be treated successfully with endoscopic balloon dilatation.

     

Anomalous behavior above the Curie temperature in (Nd1−xGdx)0.55Sr0.45MnO3 (x = 0, 0.1, 0.3 and 0.5)

Magnetic properties were studied just above the ferromagnetic–paramagnetic (FM–PM) phase transition of (Nd_1−xGd_x)_0.55Sr_0.45MnO₃ with x = 0, 0.1, 0.3 and 0.5. The low-field inverse susceptibility (χ⁻¹) of Nd_0.55Sr_0.45MnO₃ exhibits a Curie–Weiss-PM behavior. For x ≥ 0.1, we observe a deviation in χ⁻¹(T) behavior from the Curie–Weiss law. The anomalous behavior of the χ⁻¹(T) was qualified as Griffiths phase (GP)-like. The study of the evolution of the GP through a susceptibility exponent, the GP temperature and the temperature range of the GP reveals that the origin of the GP is primary due to the accommodated strain. Likewise, the magnetic data reveal distinct features visible only for x = 0.5 at a low magnetic field that can be qualitatively understood as the result of ferromagnetic polarons, entailed by the strong effect of chemical/structural disorder, whose concentration increases upon cooling towards the Curie temperature. We explained the magnetic properties at a high temperature for the heavily Gd-doped sample (x = 0.5) within the phase-separation scenario as an assembly of ferromagnetic nanodomains, antiferromagnetically coupled by correlated Jahn–Teller polarons.

Magnetic properties were studied just above the ferromagnetic–paramagnetic (FM–PM) phase transition of (Nd_1−xGd_x)_0.55Sr_0.45MnO₃ with x = 0, 0.1, 0.3 and 0.5.     

Atlanto‐odontoid pyogenic arthritis revealing a Jugular Vein Thrombosis

Pyogenic arthritis of the atlantoaxial joint is scarce. It can lead to several complications, such as spinal cord compression and cerebral vein thrombosis. A 51‐year‐old man presented with a twenty‐day history of inflammatory neck pain. Physical examination revealed paravertebral muscle contracture, restricted neck movement, and fever. Spine magnetic resonance imaging (MRI) showed synovitis of atlanto‐odontoid joint, anterior epidural collection, and cerebral vein thrombosis. Transthoracic echocardiography was unremarkable. The patient was successfully treated with anti‐staphylococcal antibiotic treatment for 12 weeks associated with immobilization of the cervical spine. MRI performed one month after the initiation of the treatment showed disappearance of the epidural collection. The diagnosis of septic arthritis of the atlantoaxial joint should be considered in a patient with inflammatory neck pain. MRI findings are relevant in making the diagnosis of a septic atlanto‐odontoid joint. Conservative treatment, including antibiotic and neck immobilization, can be sufficient for the treatment of pyogenic arthritis of the atlantoaxial joint. Cerebral vein thrombosis is a rare complication due to septic arthritis of the atlantoaxial joint.     

Synthesis,DFT Molecular Geometry and Anticancer Activity of Symmetrical 2,2′-(2-Oxo-1H-benzo[d]imidazole-1,3(2H)-diyl) Diacetate and Its Arylideneacetohydrazide Derivatives

To identify new candidate anticancer compounds, we here report the synthesis of benzimidazole derivatives: diethyl 2,2′-(2-oxo-1H-benzo[d]imidazole-1,3(2H)-diyl) diacetate and its arylideneacetohydrazide derivatives, using ultrasonic irradiation and conventional heating. The compounds were confirmed by Nuclear magnetic resonance (NMR) (JEOL, Tokyo, Japan) and Fourier transform infrared spectroscopy (FTIR) spectroscopy (Thermoscientific, Waltham, MA, USA). The molecular structure and electronic properties of the studied compounds were predicted for the acetohydrazide hydrazones. These compounds exist as a mixture of configurational and conformational isomerism as well as amido-amidic acid tautomerism. The NMR spectral data proved the predominance of syn-E amido isomers. In addition, density functional theory (DFT) predicted stability in the gas phase and showed that syn-E amido isomers are the most stable in the presence of an electron donating group, while the anti-isomer is the most stable in the presence of electron-attracting substituents. The anticancer activity of these synthetic compounds 6a, 6b and 6c towards both colon cancer (HCT-116) and cervical cancer (HeLa) cells was examined by MTT assay and DAPI staining. The MTT assay revealed a strong antiproliferative effect against the cancer cells at low concentrations, and interestingly, no significant inhibitory action against the non-cancerous cell line, HEK-293. The IC50 values for HCT-116 were 29.5 + 4.53 µM, 57.9 + 7.01 µM and 40.6 + 5.42 µM for 6a, 6b, and 6c, respectively. The IC50 values for HeLa cells were 57.1 + 6.7 µM, 65.6 + 6.63 µM and 33.8 + 3.54 µM for 6a, 6b, and 6c, respectively. DAPI staining revealed that these synthesized benzimidazole derivatives caused apoptotic cell death in both the colon and cervical cancer cells. Thus, these synthetic compounds demonstrate encouraging anticancer activity as well as being safe for normal human cells, making them attractive candidates as anticancer agents.     

Study of physical properties of a ferrimagnetic spinel Cu1.5Mn1.5O4: spin dynamics,magnetocaloric effect and critical behavior

The present work reports a detailed study of the spin dynamics, magnetocaloric effect and critical behaviour near the magnetic phase transition temperature, of a ferrimagnetic spinel Cu_1.5Mn_1.5O₄. The dynamic magnetic properties investigated using frequency-dependent ac magnetic susceptibility fitted using different phenomenological models such as Neel–Arrhenius, Vogel–Fulcher and power law, strongly indicate the presence of a cluster-glass-like behavior of Cu_1.5Mn_1.5O₄ at 40 K. The magnetization data have revealed that our compound displays an occurrence of second-order paramagnetic (PM) to ferrimagnetic (FIM) phase transition at the Curie temperature T_C = 80 K as the temperature decrease. In addition, the magnetic entropy change (ΔS_M) was calculated using two different methods: Maxwell relations and Landau theory. An acceptable agreement was found between both sets of data, which proves the importance of both electron interaction and magnetoelastic coupling in the magnetocaloric effect (MCE) properties of Cu_1.5Mn_1.5O₄. The relative cooling power (RCP) reaches 180.13 (J kg⁻¹) for an applied field at 5 T, making our compound an effective candidate for magnetic refrigeration applications. The critical exponents β, γ and δ as well as transition temperature T_C were extracted from various techniques indicating that the magnetic interaction in our sample follows the 3D-Ising model. The validity of the critical exponents is confirmed by applying the Windom scaling hypothesis.

The present work reports a detailed study of the spin dynamics, magnetocaloric effect and critical behaviour near the magnetic phase transition temperature, of a ferrimagnetic spinel Cu_1.5Mn_1.5O₄.     

Experimental and modeling study of ZnO:Ni nanoparticles for near-infrared light emitting diodes

This work is devoted to the synthesis and study of the different properties of ZnO nanoparticles (NPs) doped with the Ni element. We have used a simple co-precipitation technique for the synthesis of our samples and various structural, morphological and optical techniques for their analysis. Energy-Dispersive X-ray spectroscopy (EDX) confirms the stoichiometry of the samples. The X-Ray Diffraction (XRD) patterns reveal the hexagonal wurtzite phase of polycrystalline ZnO with a P63mc space group. Debye Scherrer and Williamson–Hall methods show that the average size of crystallites is around 40 nm. Transmission electron microscopy (TEM) images confirm the XRD results. The optical spectrum of Zn_0.95Ni_0.5O shows the presence of near-band-edge (NBE) ultraviolet emission. The absorption defect bands appearing near the blue–green region and near infrared emission are attributed to the Ni²⁺ intra-3d luminescence. The electronic structure of the Ni²⁺ doped ZnO NPs confirms the T_d site symmetry of Ni²⁺ in the ZnO host crystal and leads to a perfect correlation between calculated and experimental energy levels.

This work is devoted to the synthesis and study of the different properties of ZnO nanoparticles (NPs) doped with the Ni element.