Numerical data on neocortical neurons in adult rat, with special reference to the GABA population

The disector method was used to estimate the numerical density of neurons (number per unit volume) and their actual number per column (number under a given area of pial surface), in the occipital (monocular segment of the primary visual area, Oc1M), the parietal (somatosensory barrelfield area, Par1) and the frontal cortex (primary motor area, Fr1) of adult rat. Values were first obtained for all neurons in each layer, and then for GABA neurons as identified with postembedding immunocytochemistry on semithin sections. The numerical density of neurons in the frontal cortex (34,000/mm³) was significantly lower than in the two other neocortical areas (occipital: 52,000; parietal: 48,000/mm³). The GABA population showed a similar difference and consequently represented an equivalent proportion of total (15%) in the three cortical areas. Across layers, there was an alternate distribution of low and high density of neurons from layers II–III to VI in the three cortical areas, with the highest density in layer IV of the two sensory areas. The laminar changes in density of the GABA neurons were not as pronounced as those of the overall population. Consequently, the layers with the highest overall neuronal densities tended to have a lower proportion of GABA neurons and vice versa. There were more neurons under 1 mm² of surface in the parietal (90,000) than the occipital or the frontal cortex (71,000), which was also true of the GABA neurons. The greater number of neurons per column in the parietal cortex was mostly imputable to layer IV, the main recipient of thalamic axons. Comparing these values from the rat with those previously obtained in cat and monkey, it seemed that the number of neurons per cortical column was the highest in the sensory area preferentially used by each species.     

Distribution of spermatogenesis in the testicles of azoospermic men: the presence or absence of spermatids in the testes of men with germinal failure [published erratum appears in Hum Reprod 1998 Mar;13(3):780]

The aim of the study was to determine whether a prior diagnostic testicle biopsy can predict success or failure of testicular sperm extraction (TESE) with intracytoplasmic sperm injection (ICSI) in patients with non-obstructive azoospermia caused by testicular failure, and what is the minimum threshold of sperm production in the testis which must be surpassed for spermatozoa to reach the ejaculate. Forty- five patients with non-obstructive azoospermia caused by testicular failure underwent diagnostic testicle biopsy prior to a planned future TESE-ICSI procedure. The diagnostic testicle biopsy was analysed quantitatively, and correlated with the quantitative findings of spermatogenesis in patients with normal spermatogenesis, as well as with the results of subsequent attempts at TESE-ICSI. Men with non- obstructive azoospermia caused by germinal failure had a mean of 0-6 mature spermatids/seminiferous tubule seen on a diagnostic testicle biopsy, compared to 17-35 mature spermatids/tubule in men with normal spermatogenesis and obstructive azoospermia. These findings were the same for all types of testicular failure whether Sertoli cell only, maturation arrest, cryptorchidism, or post-chemotherapy azoospermia. Twenty-two of 26 men with mature spermatids found in the prior testis biopsy had successful retrieval of spermatozoa for ICSI, 12 of their partners became pregnant, and are either ongoing or delivered. The study suggests that 4-6 mature spermatids/tubule must be present in the testis biopsy for any spermatozoa to reach the ejaculate. More than half of azoospermic patients with germinal failure have minute foci of spermatogenesis which are insufficient to produce spermatozoa in the ejaculate. Prior diagnostic testicle biopsy analysed quantitatively (for the presence of mature spermatids) can predict subsequent success or failure with TESE-ICSI. Incomplete testicular failure may involve a sparse multi-focal distribution of spermatogenesis throughout the entire testicle, rather than a regional distribution. Therefore, it is possible that massive testicular sampling from many different regions of the testes may not be necessary for successful TESE-ICSI.      

Adhesion inhibitory activity of β-lactoglobulin isolated from infant formulae

β-Lactoglobulin was isolated from infant formulae that were ultra high temperature (UHT) -treated, sterilized or spray-dried. The effect of the isolated β-lactoglobulin on SfaII-fimbriae-mediated adhesion of Escherichia coli to human ileostomy glycoproteins was studied in vitro. β-Lactoglobulin isolated from sterilized formulae was found to perform significantly less well than preparations from spray-dried formulae (p = 0:05). Great heterogeneity was observed in the adhesion inhibitory capacity of β-lactoglobulin isolated from UHT-treated formulae. Therefore, no significant difference was observed between UHT-treated and sterilized formulae or spray-dried formulae (p < 0:10). It can be hypothesized that β-lactoglobulin from spray-dried and some UHT-treated infant formulae may affect the colonization of mucous membranes by E. coli strains causing neonatal septicaemia and meningitis.     

Mutations in the retinal guanylate cyclase (RETGC-1) gene in dominant cone-rod dystrophy

The dominant cone-rod dystrophy gene CORD6 has previously been mapped to within an 8 cM interval on chromosome 17p12-p13. The retinal- specific guanylate cyclase gene (RETGC-1), which maps to within this genetic interval and previously was implicated in Leber's congenital amaurosis, was screened for mutations within this family and in a panel of small families and individuals with various cone and cone- rod dystrophy phenotypes. A missense mutation (E837D) was identified in affected members of the CORD6 family, as well as a second missense mutation (R838C) in three other families with dominant cone-rod dystrophy. RETGC-1 is only the fourth gene to be implicated in cone-rod dystrophy and this is the first report of dominant mutations in this gene.      

Frameshift mutation in the survival motor neuron gene in a severe case of SMA type I

Recently, a spinal muscular atrophy (SMA) determining gene, termed survival motor neuron (SMN) gene, has been isolated from the 5q13 region and found deleted in most patients. A highly homologous copy of this gene has also been isolated and located in a centromeric position. We have analyzed 158 patients (SMA types I-IV) and found deletions of SMN exon 7 in 96.8%. Mutations other than gross deletions seem to be extremely rare. In one of the undeleted SMA type I patients, a newborn who survived for only 42 days, we detected a maternally inherited 5 bp microdeletion in exon 3, resulting in a premature stop codon. By RT-PCR and long range PCR amplification we were able to show that the deletion belongs to the SMN gene, rather than to the centromeric copy, and that the proposita had no paternal SMN gene. Analysis of the neuronal apoptosis inhibitor protein (NAIP) gene, which maps close to SMN and has been proposed as a SMA modifying gene, suggests the presence of at least one full-length copy. Haplotype analysis of closely linked polymorphic markers suggests that the proposita also lacks the maternally derived copy of the centromeric homologue of SMN supporting the hypothesis that the severity of the phenotype might depend on the reduced number of centromeric genes in addition to the frameshift mutation.      

Tridimensional structure of the Golgi apparatus in type A ganglion cells of the rat

The three-dimensional structure of the whole Golgi apparatus and of its components in type A ganglion cells was examined in thin and thick sections by low- and high-voltage electron microscopy. At low magnification, in 10-μm-thick sections of osmicated cells, the Golgi apparatus formed a broad, continuous perinuclear network. At higher magnification and in thinner sections of cells impregnated with uranyl acetate-lead-copper citrate or postfixed in K-ferrocyanide-reduced osmium, the Golgi apparatus appeared as a heterogeneous structure in which saccular regions characterized by stacks of saccules alternated with intersaccular regions made up of branching membranous tubules which bridged the saccules of adjacent stacks. The saccular regions consisted of the following superimposed elements: (1) a cis-osmiophilic element made up of anastomosing tubules; (2) two or three saccules negative for the phosphatases tested (i.e., nicotinamide adenine dinucleotide phosphatase = NADPase, thiamine pyrophosphatase = TPPase, and cytidine monophosphatase = CMPase); (3) two saccules showing TPPase activity; and (4) one to three trans-sacculotubular elements showing a “peeling-off” configuration, one of which showed CMPase activity. The saccules (phosphatase-negative) on the cis-side of the Golgi stacks showed, in addition to small circular pores, larger perforations in register. The cavities thus formed in the stacks of saccules, called “wells,” always associated with small 80-nm vesicles, had a pan shape with the mouth directed toward the cis-face and the bottom closed by a TPPase-positive saccule. In face views of the saccules, the smallest of these perforations showed either a crescent shape, due to the presence of a bud on one side of the perforation, or a circular shape with a single small 80-nm vesicle in the center which was occasionally attached to the saccule by a filiform stalk. Such smaller cavities were considered as the precursors of the larger perforations and eventually of the wells. The small 80-nm vesicles seen in the small cavities or in the wells appeared to form in situ and possibly migrate toward the cisternae of endoplasmic reticulum seen proximal to the cis-face of the stack of saccules. Small 80-nm vesicles were also numerous in the intersaccular regions, along the lateral- and trans-aspects of the Golgi stacks, while larger, 150-to 300-nm vesicles, coated and uncoated, were seen only on the trans-face of the Golgi stacks in proximity to the trans-sacculotubular elements which appear to “peel off” from the Golgi stacks.     

Effect of timing of oocyte denudation and micro-injection on survival, fertilization and embryo quality after intracytoplasmic sperm injection

In human in-vitro fertilization (IVF), the oocytes are surrounded by cumulus and corona cells at the time of insemination so that their maturity cannot easily be evaluated. The best IVF results are obtained if the oocytes are inseminated 2-6 h after retrieval. In the intracytoplasmic sperm injection (ICSI) procedure, the oocytes are denuded by enzymatic and mechanical treatment in order to be able to perform the injection. As a consequence, the nuclear maturity of the oocytes can be evaluated and only those that have extruded the first polar body are injected. However, metaphase-II oocytes that have not yet reached cytoplasmic maturity cannot be recognized. The purpose of this study was to investigate the effect of different timing of cumulus- corona cell removal and injection on the outcome of ICSI. For this we allowed the oocytes to complete in-vitro cytoplasmic maturation in two different culture conditions: (i) surrounded by their cumulus and corona cells or (ii) totally denuded. We performed three different studies on sibling oocytes obtained after a standardized buserelin/human menopausal gonadotrophin (HMG) protocol. We investigated the effect of early (1-2 h after retrieval) and late (5-6 h after retrieval) oocyte denudation and injection on the survival and fertilization of the injected oocytes and on embryo cleavage after fertilization. We found no statistically significant differences between early and late injection, indicating that after a standardized buserelin/HMG protocol the metaphase-II oocytes do not need time for further cytoplasmic maturation. Furthermore, a different timing of cumulus-corona cell removal has no effect on the outcome of ICSI, suggesting that the surrounding cells are not necessary for survival, fertilization and cleavage after ICSI.